Pratt Industries Inc.
- Home
- Companies
- Pratt Industries Inc.
- Products
- PRATT - Expandable Truss Trailer
PRATT - Expandable Truss Trailer
Expandable ground level roll-off trailers, flat, slant, or drop profile & hydraulic lift neck.
Most popular related searches
hydraulic lifting
hydraulic cylinder
piston pump
safety floor
dust control
hydraulic motor pump
12V pump
airborne asbestos
hydraulic profile
hydraulic profiler
- Galvanized Head Board
- Galvanized Single Piece Hydraulic Neck
- Galvanized Deck Plate
- Galvanized Deck Rollers
- Galvanized Ground Rollers
- Galvanized ICC Bumper
- Aluminum Tool Box with Hydraulic Pump and Motor
- Galvanized Extended Frame with Chains
- Main Beam Top & bottom flanges: 3/8" x 6" ASTM A514 (130 Ksi). Web: 3/16" thick A572 (80 Ksi) with continuous automatic welding.
- Cross Member 4" Structural Jr. I-beam, A656 80 Ksi on 12" centers
- Coupler 20" pin setting, 50 Ksi 3/4" hinged coupler plate on hydraulic arm with 60" stroke
- Hoist Package (2) 4" x 30" double acting cylinders. 12 volt DC motor/Piston pumps @ 25,000 psi, 1000 cold cranking amp deep draw batter with 6 Ga. Charge wire using a single post female plug.
- Side Rails 6-3/4" x 1/4" formed channel ASTM A572 Grade 50
- Landing Gear 2-speed gear with longitudinal and transverse bracing
- Deck Rollers 6" x 3/16" x 99-1/8", A-512 type II tupe, 1-1/4" axles on 4 bolt flange bearings tapped for install. Rear deck rollers 24" centers and air actuated unlock device. Front deck rollers 36" centers and manual actuated unlock device. Heavy-duty rear roller, 6" diameter 1/4" thick wall, 1-1/2" axle on bronze bushings, BE-50, 60 & 70 have 6 adjustable rollers in expansion zone. Adjustable rollers pull out automatically. All deck rollers are zinc-plated.
- Ground Rollers (2) 14" x 1/4" wall, 1-1/2" axles on heavy duty bronze bushings.
- Decking 14 gauge thread plate safety-walking floor
- Suspension 44,000 LBS Hutch H-9700 spring tandem
- Slide box Hutch H-8500-44 special roller flat off road package. Air unlock device.
- Safety Bumper Hinged rear safety bumper, air-actuated. Meets DOT collision requirements.
- Axles (2) 5" round, 22,5000 LBS rating, 49" center, automatic slack adjusters, 1S-2M anti-lock brake system.
- Brakes 16-1/2" x 7" air brake, non-asbestos with outboard drums
- Wheels 10-hole disc, hub piloted
- Tires 255/70R/22.5 Radial
- Straps Quantity varies based on model
- GVWR 68,000 LBS
- Tandem Axle Air Ride
- Half Length Load Control (Fully Galvanized)
- Full Length Load Control (Fully Galvanized)
- Aluminum Tool Box
- Center Tie Downs, Each
- Hubdometer
- Flag Holders - 4 pipes, holed & welded inside the beam (2 front / 2 back)
- Flag Holders (Retractable) - 4 Galvanized holders (2 front / 2 back)
- LED Light Upgrades
- Dust Shields
- Controllable Rollers On the back 30` trailer to control speed of load after unlocking rollers
- S15000 12V Electric Winch
- Sliding Ratchet Track (6pcs of 6FT Sections for the entire trailer)
- 5" Outside Rails
- 5" Bore Hydraulic Cylinders
- TIRES: 11R22.5 Radial Tire Upgrade 14 ply or 295/75R22.5 Radial Tire Upgrade 14 ply
- Aluminum Wheels, 8.25x22.5 (Tandem-Axle)
- Aluminum Decking (Saving of 367 Lbs)
- Solar Battery Saver
- Additional Weld on Ratchet
- Split Bed Rollers
- 4-way plug on C/S for strobe lights
- Tow-Bar at the rear of the trailer for Pulling
- D-Rings (2) at the rear of the trailer for Pulling