Krohne Messtechnik GmbH
- Home
- Companies
- Krohne Messtechnik GmbH
- Products
- OPTIBAR - Model PM 5060 - Pressure ...
OPTIBAR - Model PM 5060 -Pressure Transmitter for Process Pressure and Level Applications
The OPTIBAR PM 5060 is a pressure transmitter for process pressure and level measurement in hygienic and non-hygienic applications with gases, liquids and steam. It can be used in open tanks and – as dual version for electronic differential pressure measurement – also in closed vessels. The pressure device features a piezoresistive or a strain gauge metallic diaphragm. Depending on the measuring cell, the pressure transmitter can operate over a wide process pressure range from 100 mbar / 1.45 psi up to 1000 bar / 14500 psi.
Most popular related searches
pressure transmitter
pressure monitoring
process pressure transmitter
differential pressure monitoring
level monitoring
pressure level monitoring
fluid measurement
beverage industry hygiene
industry hygiene monitoring
strain gauge
Pressure transmitter for process pressure and level applications
- Rugged design with fully welded metallic diaphragm suited to high pressure ranges and hygienic requirements
- 100 mbar…1000 bar / 1.45…14500 psi
- Various threads, flanges, aseptic and other connections
- 2-wire 4…20 mA/HART®, FF, Profibus-PA, Bluetooth®
The OPTIBAR PM 5060 can be provided with or without standard silicon oil fill fluid as well as FDA approved oils for hygienic applications. The flush process connections allow for hygienic and crevice-free installation. The pressure device can be used up to operating temperatures of +105°C / +221°F, special versions even allow for up to +200°C / +392°F without separate diaphragm seals.
- Various housing materials available: plastic, aluminium, stainless steel (precision casting or electro-polished)
- Extremely quick step response times <85 ms
- Available with flush mounted, hygienic process connections for the food industry
- Quick setup for all applications
- Extensive diagnostic and parameterization functions on the display and adjustment module or the user-friendly and free DTMs
- Wireless device commissioning, verification and monitoring with the OPTICHECK Pressure Mobile app
- Ex ia, Ex d, Ex t approvals
- SIL 2/3 certified by TÜV Rheinland
General
- Absolute and gauge pressure measurement up to 1000 barg / 14500 psig
- Level measurement in batch and storage tanks
Chemical, petrochemical, power generation, water, machinery/OEM and other industries
- Monitoring of supply pressure in pipelines
- Dry-run protection of delivery pumps
- Pressure monitoring of compressors
Food and beverage industry, pharmaceutical industry
- Hygienic level monitoring in the production of food and pharmaceuticals
- Filter monitoring
Depending on selected device configuration
General information
- Product type Pressure transmitter
- Product family name OPTIBAR
- Product positioning For advanced pressure and level applications
- Measured media Gases, Liquids, Steam
Approvals/Standards
- Certificates/Approvals Others Oxygen, Pressure Equipment Directive (PED)
- Certificates/Approvals Safety SIL 2/3
- Certificates/Approvals Ex ATEX, IECEx
- Certificates/Approvals Hygienic 3A, EC 1935/2004, EHEDG, FDA
- Certificates/Approvals Marine DNV, GL
Communication
- Digital outputs FOUNDATION™ fieldbus, HART®, Profibus-PA
- Analogue outputs 4…20 mA
Materials
- Diaphragm Ceramic (Al2O3)
- Fill fluid Dry measuring cell (without fill fluid)
- Measuring cell seal Ethylene propylene diene monomer (EPDM), Perfluoroelastomer rubber (FFKM), Fluoroelastomer rubber (FKM)
Operating conditions
- Process temperature -40…+150°C/ -40…+302°F
Process connections
- Male
- G½ (EN 837-1)
- G½ (DIN 3852, 11 mm bore)
- G½, G¾ front flush (DIN 3852)
- G1 front flush (cone 40°, cone 33.4°) Hygienic G1 for hygienic adapters
- G2 (DIN 3852)
- ½ NPT (11 mm bore)
- 1 NPT front flush
- 1½ NPT, 2 NPT
- M20 x 1.5 (EN 837-1)
- ½ NPT, ¼ NPT
Hygienic connections
- DIN clamp (32676): DN25, DN40, DN50
- ISO clamp (2852): 25, 40, 51
- Tri-Clamp: 1", 1½", 2", 3"
- Hygienic fitting with compression nut: F40
- SMS (1146): 25 mm, 38 mm, 51 mm
- Aseptic flange (DIN 11864-2A): DN40, DN50
- Dairy screw (DIN 11851): DN25, DN40, DN50
- VARIVENT®: N, F
- Aseptic screwed pipe connection (DIN 11864-1A): DN40, DN50
- NEUMO BioControl®: DN25, DN50, DN65, DN80
- NEUMO BioConnect®: DN80
Gauge pressure measurement for inerting storage tanks
Application Report | Chemical
- Maintaining a protective layer of nitrogen
- Reliable prevention of oxidation of stored ester
- Increased product yield
- Use of pressure transmitter with ceramic measuring cell