ProMinent - Model DULCOFLOW -Flow Meter

Your reliable control unit: unobtrusively measures, monitors and detects faults.

The device works on the ultrasound measuring principle. It was developed specifically for measuring small pulsating volumetric flows. It is installed around 30 cm downstream of the metering pump, so that there is still sufficient pulsation in the flow. All liquids that conduct ultrasound waves can be measured.

• Maximum chemical resistance by the use of PVDF and PTFE
• No electrical conductivity of the medium is needed
• Measurement above stroke volumes of approx. 30 µl
• Detection of gas bubbles in the feed chemical
• No bottlenecks in the measuring tube. Media with small undissolved particles or with increased viscosity can be measured
• A 0/4 -20 mA current output and a frequency output are available for remote transmission of the measured values.

• Measurement of the chemical consumption, for example in surface treatment
• Guaranteed metering, for example in the paper industry
• Measured value transmission and pump control by the central control system
• Measurement of aggressive chemicals
• Not suitable for liquids, which have minimal acoustic conductivity, e.g. sodium hydroxide (NaOH) with a concentration of greater than around 20%
• We recommend first testing the measurability with emulsions and suspensions
• Media like chlorine dioxide liquids, which can penetrate through PVDF, can lead to shorter lifetime of the transducers.

Technical Details

• 2 LEDs for status display and stroke feedback
• 2-line graphic display
• 0/4 – 20 mA standard signal and 0 – 10 kHz frequency output for remote transmission of the measured value
• Compact, chemically-resistant plastic housing
• Measuring accuracy ±2% if the device has been calibrated to the chemical to be measured. Max. operating pressure 16 bar.