Pulse - Model AP100-CD -Chlorine Dioxide Meter

With high emphasis on maintaining wash water sanitation, it is critical to maintain and control sanitizer levels at all times during processing, to prevent the risk of cross contamination. Unlike on-line colorimetric monitors, the AP100-CD meter for active chlorine dioxide uses a membrane covered amperometric sensor that does not require the addition of special reagents. Model AP100-CD controller has a large display with icon based programming. It shows the current measurement value, push button set point selection, adjustable 4-20 mA output, and compact design. When the Chlorine Dioxide ppm value goes below the set point, a pump or valve is activated. When the measured value reaches the set point, it shuts the pump off. High and Low alarm points are set to alert the user in case the measured values exceed the upper or lower limits for normal operation.