Pulse Instruments products

The SIGNET 2450 Pressure Sensor has a one-piece injection molded SYGEF PVDF body and ceramic diaphragm for superior compatibility in corrosive Iiquids. Three (3) pressure versions a!low for optimal resolution matched to your sensing needs Solid state circuitry eliminates drift (no internal potentiometers.). Built-in temperature compensation provides outstanding accuracy over wide temperature ranges. S3L output allows for wiring distances between sensor and SIGNET 8450 Pressure Transmitter or 8250 Level Transmitter up to 121m (400 ft.) An integral adapter (optional) allows for integration of the sensor and transmitter into a compact assembly.

The EZ Series electronic metering pumps with microprocessor control offer precise chemical injection at a low cost. EZ pumps have outputs to 6.3 GPH and pressure capabilities to 150 PSI. The compact size and simple control make it ideal for water treatment and other industrial applications.

With high emphasis on maintaining wash water sanitation, it is critical to maintain and control sanitizer levels at all times during processing, to prevent the risk of cross contamination. Unlike on-line colorimetric monitors, the AP100-CD meter for active chlorine dioxide uses a membrane covered amperometric sensor that does not require the addition of special reagents. Model AP100-CD controller has a large display with icon based programming. It shows the current measurement value, push button set point selection, adjustable 4-20 mA output, and compact design. When the Chlorine Dioxide ppm value goes below the set point, a pump or valve is activated. When the measured value reaches the set point, it shuts the pump off. High and Low alarm points are set to alert the user in case the measured values exceed the upper or lower limits for normal operation.

The Pulse Instruments AP-110 Series controllers offer a high level of flexibility in controlling water treatment applications. One sensor input is available that are compatible with a variety of sensors: Contacting conductivity with cell constant 0.01, 0.1, 1.0 or 10.0, Electrodeless conductivity, pH, ORP, Any Pulse Instrument disinfection sensor, Generic sensor (any type of sensor with a linear voltage output between -2VC and 2 VDC).

The U-50 Series multi-parameter water quality meters are equipped to measure and log data for as many as 11 parameters simultaneously with one single probe. Experience the durability, reliability and intuitive software that will exceed your expectations. Monitor surface water and ground water by deploying the probe directly into a body of water or using a flow cell.

This waterproof, battery-operated ORP and pH meter stands up to the most demanding field applications and delivers over 2,000 hours of continuous operation. A convenient Quick-Start Guide is located on the back of the meter to make the unit easy to operate in the field. Featuring automatic or 1 to 5 point manual calibration, the rugged meter offers a full complement of GLP-related features. You can record and store up to 10 set-up parameters and calibrations - a valuable feature for fast measurements in the field. Download additional methods and software updates via the web.

Never watch a tester sink to the bottom of your tank or pond! These waterproof testers float, so there’s no need to worry. Valox housing and stainless steel electrodes offer good chemical compatibility and durability. All waterproof Testrs have replaceable sensors. Reuse the meter body many times without losing waterproof and dustproof protection.

The CL 223 Chlorine and Chlorine Dioxide Transmitter, with the appropriate sensor, measures over the range of 0.01 to 5mg/l or 0.05 to 20mg/l. The basic transmitter has a 115 VAC power supply, linear isolated current output and one alarm.

Advanced Model EP500 is an essential HACCP tool for wash water automation and control that allows multi-function monitoring, pump control, proportional output and recording of any oxidizer sanitizer. Measure Free Chlorine (ppm), ORP, pH (ISFET), Non-Glass, Conductivity of Dissolved Solids (CDS) and Temperature with a choice of measuring Chlorine dioxide (ppm) or Dissolved Ozone (ppm). Modular design allows you to select the desired measurement options.

Reduce maintenance and costs with affordable optical RDO technology. Waterproof and dustproof with IP67 rating. Large Backlit display. Automatic Temperature Compensation. °C/°F selectable. Easy-to-service, low maintenance DO probe. Store up to 500 data sets; easy USB or RD-232 output with optional data cables. Offset adjustment capabilities. pH features: Push-button pH calibration at five points with automatic buffer recognition.