IPEX Centurion - Model CIOD -PVC Pipe and Fittings
IPEX Centurion extends the corrosion-free benefits of Blue Brute® to larger diameters of pipe and new applications.
- Bottle-tight joints with option of removable gaskets
- Superior hydraulics
- Corrosion-Proof Performance
The versatility and ease of installation of IPEX Centurion is unmatched – costly and difficult to install corrosion protection can be eliminated. In addition, unlike HDPE or concrete pressure pipe, every length of IPEX Centurion is tested to double its pressure rating.
IPEX Centurion is manufactured with a cast iron outside diameter (CIOD) so it is compatible with much of the existing older infrastructure of iron pipes. In addition, IPEX Centurion can be field cut, which means unexpected changes in the field can be accommodated quickly, without having to wait for new shop drawings.
IPEX Centurion Fittings are manufactured using sections of AWWA C905 pipe, overwrapped with a layer of fibre reinforced plastic (FRP). While IPEX Centurion is compatible with iron fittings, IPEX recommends the use of IPEX Centurion fittings exclusively with IPEX Centurion pipe.
PRODUCT DETAILS
IPEX Centurion® PVC Pipe (CIOD)
- 24 - 60" (600 - 1500 mm) SDR51 80 psi (550 kPa)
- 14 - 60" (350 - 1500 mm) SDR41 100 psi (690 kPa)
- 14 - 54" (350 - 1350 mm) SDR32.5 125 psi (860 kPa)
- 14 - 48" (350 - 1200 mm) SDR25 165 psi (1130 kPa)
- 14 - 42" (350 - 1050 mm) SDR18 235 psi (1620 kPa)
- 14 - 16" (350 - 400 mm) SDR14 305 psi (2100 kPa)
CSA B137.3 certified
- AWWA C905
- NSF Std. 61 certified
- BNQ NQ 3624-250*
Municipal transmission mains
- Sewer forcemains
- Irrigation piping
- Gravity sewer mains
IPEX Centurion® Fabricated PVC Fittings (CIOD)
- 14 - 30" (350 - 750 mm) 165 psi (1130 kPa)
- 14 - 30" (350 - 750 mm) 235 psi (1620 kPa)
CSA B137.3 certified
- AWWA C905
- NSF Std. 61 certified
- BNQ NQ 3624-250*
Municipal transmission mains
- Sewer forcemains
- Irrigation piping
- Gravity sewer mains
GENERAL
Pipe must conform to AWWA C905 and be certified to CSA B137.3 “Rigid Poly (Vinyl Chloride) (PVC) Pipe for Pressure Applications.”DR51, 41, 32.5, 25, 18, and 14 pipe must have the following pressure class/rating: 80 psi (550 kPa), 100 psi (690 kPa), 125 psi (860 kPa), 165 psi (1 140 kPa), 235 psi (1 620 kPa) and 305 psi (2 100 kPa). For pressure applications, each length of pipe must be hydro-tested at twice the class/rating and a short-term pressure test must be conducted once per production run. Pipe to be IPEX Centurion or approved equal.
FABRICATED FITTINGS
Fabricated fittings shall be made from segments of AWWA C905 pipe that are butt fused or bonded together. Some fittings are over-wrapped with fiberglass-reinforced polyester. The fittings must always meet the pressure rating of the pipe system.