Sabio - Model 4010M -Gas Dilution Calibrator

The Model 4010 calibrator uses embedded microprocessor technology to accurately deliver and control gas concentrations, along with multiple curve fits to linearize the desired output for the intended purpose The unit can be operated manually or automatically to conduct calibrations or audits that exceed U.S. Environmental Protection Agency (EPA) method requirements.

Highly accurate mass flow controllers (MFC`s) along with an optional ultraviolet (UV) ozone generator and photometer ensure reliable, repeatable gas (S02, H2S, NO, CO, HC and 03) concentrations.

The Model 4010 can store 20 calibration sequences, with up to 20 concentration levels in each sequence. Local or remote operation is accomplished using the front panel keypad, external keyboard, RS-232 or Ethernet ports. Intuitive, menu driven software allows uncomplicated programmability and access to real-time diagnostics.

Pnuematics

• Diluent Mass Flow Controller, 0-10 SLPM
• Source Mass Flow Controller 0-100 SCCM
• 4 Calibration Gas Input Ports and 1 Purge Port
• 5 Output Ports and 1 Vent Port
• 1 Diluent Gas Input Port

Electronics

• Bright Color Display
• 47-Button Membrane Keypad
• 24 Digital Inputs/Outputs
• 2 Serial Ports. RS232, USB
• External PC Keyboard Input port
• Parallel Printer Port
• Air Source Control Port

Electrical

• Standard 90-264 VAC, 150-300 VA, 50/60 Hz

• Alternate Diluent Mass Flow Controller, Ranges 1-20 SLM
• Alternate Source Mass Flow Controller, Ranges 1-2 SLPM
• Second Source Mass Flow Controller, Ranges 1-2 SLPM
• Additional Calibration Gas Input Ports
• Multi-Source Blending
• Permeation Port
• Additional Output Ports
• Second Diluent Gas Input Port
• Internal Ozone Generator
• Ozone Generator UV Optical Servo Control Loop
• Internal Ozone UV Absorption Photometer
• Internal Permeation Oven
• Master Output Solenoid
• Internal Instrument Solenoid Driver for External Valve Control
• Rack Mount Kit
• Ethernet TCP/IP, Modbus, DOT Commands
• Vivid Color Touch Screen Display
• 12 Independent Timers for Sequences
• Nested Sequences

Dilutions System:

• Input Distribution Gases: 1 Standard (2 Optional)
• Input Source Gases: 4 Standard, 1 Purge, Optional 2 Additional
• Dilution Mass Flow Controller: 0-10 SLPM, Optional 0-20 SLPM
• Source Mass Flow Controller: 0-100 SCCM, 0-10,000 SCCM
• 2nd Source Mass Flow Controller: 0-10,000 SCCM
• Flow Accuracy: £ * 0.5% Full Scale
• Flow Repeatability: s± 0.15% Full Scale
• Linearity: £ ± 0.5% Full Scale
• Input Pressure: 10SLPM@30PSI Optional ranaes: 20 SLPM
• Output Manifold: 6 Outputs Standard, Optional 2 Additional

Optional Internal Ozone Generator:

• Output: 2 ppb -1000 ppb, Max - 6 ppm Flexcal
• Accuracy: ± 1 % of Set Point or ± 2 ppb @ 5 SLPM
• Nominal Flow: 100 SCCM, ±1 SCCM
• UV Lamp Temp.: 50° C, ± 0.1 8 C

Optional Internal UV Absorption Photometer

• Standard Ranges: 0-0.5,1.0,2.0 ppm
• Linearity: ± 1 ppb or 0.5% of full scale (greater of two)
• Precision: ± 1 ppb
• Zero Drift: < ± 1 ppb for 24 hrs or 30 days
• Flow Rate: 1 Liter (nominal)
• Analog Outputs: 3 Ranges 5V, 1V, 100 mV

Optional Internal Permeation Oven:

• Chamber Materials: Glass or Teflon
• Chamber Size: 1 Perm Tube (Any Size)
• Adjustable Temperature: 5° C Above Ambient Temperature to 65 °C
• Temperature Accuracy: s±0.1 eC
• Calibrator Interface:
• Operation: Manually (47-button keypad, keyboard, serial ports
• Calibration Definitions: 20 factory-defined calibration sequences (< 20 points each)
• Calibration Types: Gas Dilution. Ozone. GPT
• Gas Definitions: 2 Diluent Gases, 20 Source Gas
• Auto Calibrations: 20 timer driven cal routines that perform user-defined calibration sequences on a 7 day calendar of events
• Digital Inputs: 24 status I/O bits for calibrator functions
• Digital Input Types: contact closure or TTL logic
• Digital Outputs: 24 status output bits for monitoring calibrator functions
• Communications: RS232, Ethernet: 10/100Base-T, USB

Calibrator System:

• Operating Temperature: 5 deg. C to SO deg. C
• Dimensions: 7.00" (17.8 cm) H x 17" (43.2 cm) W x 20" (50.8 cm) D
• Base unit Weight: 30 lbs. (13.6 kg)
• Input Voltage: 90- 264 VAC, 150-300 VA, 50/60 Hz operation