Logo Environmental XPRT
Companies
Products
Services
Software
Training
Applications
Sign in
List your business
Big Dipper - Thermaco Inc.
About
Downloads
  2. Companies
  3. Big Dipper - Thermaco Inc.
  4. Products
  5. Big Dipper - Model W-250-IS-SS - ...

Big Dipper - Model W-250-IS-SS -Sealed-Stainless Automatic Grease Removal Device

SHARE

The Big Dipper W-250-IS-SS Sealed-Stainless Automatic Grease Removal Device is rated to the PDI-G 101, and ASME A112.14.3 and A112.14.4 standards and is capable of accepting up to a 25 GPM (1.58 l/s) flow while holding more than 56.4 Pounds (25.6 Kg) of grease.  The center module which comes with digital time control, heater assembly, and mechanized skimming assemble, automatically isolates trapped grease into grease collector for easy disposal.

Most popular related searches
automatic grease removal system
grease removal system
grease removal
stainless steel strainer
basket strainer
grease trap
recovery separator
steel strainer
oil recovery
flow control
  • Certified by the Massachusetts Board of State Examiners of Plumbers and Gas Fitters for use in the state of Massachusetts per acceptance code P1-1015-143.
  • Exceeds 1" Water Seal Requirement
  • Has 1" NPT Air Relief Chamber Vent
  • Integrated Motor/Grease Outlet/Heater/Lid enables a fast, do-it-yourself unit operation reversal.
  • Compact footprint.
  • Two (2) No-Hub Connectors provided.

Features

Materials:

Exterior: 304 Stainless Steel, Bright Finish
Interior: Rotationally Molded Polyethylene

Electrical:  115 VAC, 60 Hz, 520 Watts (4.5 Amps)*

Maximum Inlet Flow Rate:  25 GPM (1.58 l/s)

Number of Skimming Wheels:  1

Skimming Rate:  20 Pounds Per Hour (9.08 Kg Per Hour)

Grease Retention Capacity: 56.4 Pounds (25.6 Kg)

Internal Solids Strainer Capacity:  1.85 Gallons (7 L)

Thermaco Big Dipper Model No. W-250-IS-SS, bright finish type 304 stainless steel exterior, rotationally molded polyethylene interior automatic self-cleaning grease and oil recovery separator(s) for floor mounted or partially recessed installation, rated at 25 gallons per minute (1.6 l/s) peak flow, 56.4 Pounds (25.6 Kg) of grease capacity and including as an integral part of the unit, 1 rotating gear hydrophobic wheel assembly for automatic grease/oil removal, an integral flow control device, self-regulating enclosed electric immersion heater, a vessel vent, an integral gas trap, a digital control for programmable operation, a field reversible motor location, a field reversible grease/oil sump outlet, quick release stainless steel lid clamps, a gasketted and fully removable 304 stainless steel lid, a lift-out strainer basket access, an internal stainless steel strainer basket for collection of coarse solids, a sump hose, and a separate grease and oils collection container. Electric assembly shall be tested to comply with pertinent sections of the Standards for Safety ANSI/UL 73 and/or ANSI/UL 1004. Electric motor equipped with overload protection. Two (2) no-hub connectors for plumbing connection provided.

*Electrical Variations

W-250-IS-SS: 115V 50/60Hz, 520 Watts (4.5 Amps)