AquaControl Parker - Model PRO Mini -Seawater Desalination System

The Parker PRO Mini Watermaker Series is designed for space restrictions while producing more fresh water, yet keeping the same small footprint. Producing 170 – 750 GPD, this desalinator is the perfect choice for the solo cruiser.

• Smallest line of Watermaker
• Easy access to main components
• Low AC power consumption
• Maximum system weight is 130 lbs

The Parker PRO Mini Series are the smallest line of watermakers and available at AquaControl Marine. The low-hassle Parker PRO Mini is engineered to fit anywhere and is available for your professional or leisure purposes. With a small footprint of approximately 2 – 3 cubic feet, sail and small power boaters have the option and convenience of a Parker watermaker. The benefits of this watermaker are endless and we would be happy to tell you more about it.

What makes the Parker PRO mini so attractive?

The Parker PRO mini is smaller than a 20 gallon (75 litre) water tank, yet able to produce between 170 – 750 GPD (644 – 2,839 LPD) in capacity. That makes this desalinator a perfect seaworthy companion for the solo cruiser. Weighing at most, 130 lbs (59 kg), the Parker PRO Mini is also more convenient than hauling around a full water tank that adds about 8 pounds per gallon to your boat. To illustrate, if a 34 gallon (128 litre) tank was filled to capacity, that would create about 272 lbs (123 kg) additional weight to haul, which will put more stress on the engine, slow down the speed, and increase fuel costs. With the PRO Mini, compact boaters will carry minimal weight, save space, and cruise without limits to any destination they wish. Featuring a simple interface, with push-button operation, the PRO Mini can be monitored via the control panel or remote (optional).

Features

This great Parker PRO Mini had unlimited features, such as Semi-Automatic Functions, 6 illuminated LED status indication lamps for system operation, an automatic freshwater flush, and sequential starting of electric motors with manual override. The Parker PRO Mini is therefore ideal for small power and sailboats. Underneath you will find a nice overview of all the most important features of the Parker PRO Mini.

Technology:

• Low AC Power Consumption
• DC power available for PRO Mini 170
• Automatic freshwater flush
• Chemical resistant Membranes

Meters/monitors:

• Hour Meter for keeping accurate ship’s logs & schedule preventative maintenance.
• New solid state electronic flow meters for visual monitoring of the product water and feed water flow used to calculate production rates of the system
• Exclusive Solid Salinity Meter shows actual product water quality, an essential tool for product water monitoring
• Product water quality is displayed in bar graph format with 10 additional LEDs

Service/Maintenance:

• Fault LED indication is provided for easy diagnosis of required maintenance
• The PRO Mini is shipped from the factory ready to install and function
• There are no optional items required, and a complete installation kit is also included along with a comprehensive and detailed Owner’s Operation & Maintenance Manual
• Worldwide Service and Sales Network for immediate attention regardless of location
• Technical service dedicated to excellent system performance
• With the most stable controller in the market, the PRO Mini keeps up its reputation as the smallest, most reliable watermaker used by boaters around the world
• With better maintenance access

Pump:

• Exclusive high-efficiency booster pump for extended pre-filter life
• Quiet high-pressure pump runs smooth and is free of pulsations
• Noise Reduction Features
• The quiet stainless steel high-pressure pump is specifically designed for seawater reverse osmosis applications. The unique design of this high-pressure pump reduces noise level to a negligent hum
• Low noise manifold design
• Vibration isolation mounts included

Materials:

• Dedicated heavy duty Magnetic Latching Relays for each motor integrated in the system
• 316 Stainless Steel Pressure Transducers for accurate measurement of system functions
• New High rejection / high yield membrane element that produces higher quality product water in a smaller space
• Fiberglass Reinforced High-Pressure Membrane Vessel is stronger and eliminates corrosion

Safety:

• A failsafe Product Water Diversion Valve
• Unique Low Voltage Control Circuitry, shielded terminals and covered high voltage components for end-user safety
• Safety alarm features

COMPACT

• Water Production (GPD) : 170
• Configuration : Compact
• Brand : Sea Recovery
• Application : Leisure Marine
• Configuration : Compact
• Product Type : Watermaker
• Performance : +-15% 850 psi / 56 Bar, 77°F / 25°C & 35,000 ppm TDS typical sea water
• Water Flow Rate : 170 Gal/day, 644 L/day
• Pump Type : Exclusive high efficiency Booster Pump
• Reverse Osmosis Membrane Type : High Rejection/High Yield aromatic tri-polyamind, thin film composite, spiral wound, single pass reverse osmosis membrane element
• Filter Type : Pre and post treatment stages, including monel screen
• Power Source : AC or DC
• Pressure Adjustment Control Type : Manual
• Minimum Inlet Pressure Rating : N/A
• Salt Rejection : 99.2, Average 99.4 %
• Salinity Monitoring : Automatic electronic monitoring. Temperature compensated with the digital continuous readout. The salinity monitoring components of the system give a continuous TDS readout in ppm (parts per million), are temperature compensated, and of a fail safe design.
• Salinity Range : Designed for seawater use up to 50,000 ppm TDS (Nacl) (typical seawater salinity is 35,000 ppm.)
• Water Feed Temperature Range : Min. 33°F / .5°C Max. 122°F / 50°C
• Output Water Temperature Range : Ambient to feed water temperature
• Feed Water Flow Rate : 4.5 gpm / 17 lpm (depending on system)
• Chlorine Tolerance : 0.1 ppm
• pH Range : 3-11 (typical seawater pH is 8)
• Pressure Rating : Feed Water Minimum: 6 psi / .41 bar / .42 Kg/cm2; Maximum: 35 psi / 2.41 bar / 2.46 Kg/cm2
• Operation Type : Seawater @ 35,000 ppm & 77° F / 25° C; Nominal: 850 psi / 56.5 bar / 57.66 Kg/cm2
• Weight : 70 lbs / 32 Kg
• Height : 26″/660 mm
• Width : 8″/200 mm
• Length : 11″/281 mm
• External Water Installation Connection Type : N/A
• Electrical Requirements : See Brochure Under Downloads

MODULAR

• Water Production (GPD) : 170
• Configuration : Modular
• Brand : Sea Recovery
• Application : Leisure Marine
• Configuration : Modular
• Product Type : Watermaker
• Performance : +-15% 850 psi / 56 Bar, 77°F / 25°C & 35,000 ppm TDS typical sea water
• Water Flow Rate : 170 Gal/day, 644 L/day
• Pump Type : Exclusive high efficiency Booster Pump
• Reverse Osmosis Membrane Type : High Rejection/High Yield aromatic tri-polyamind, thin film composite, spiral wound, single pass reverse osmosis membrane element
• Filter Type : Pre and post treatment stages, including monel screen
• Power Source : AC or DC
• Pressure Adjustment Control Type : Manual
• Minimum Inlet Pressure Rating : N/A
• Salt Rejection : 99.2, Average 99.4 %
• Salinity Monitoring : Automatic electronic monitoring. Temperature compensated with the digital continuous readout. The salinity monitoring components of the system give a continuous TDS readout in ppm (parts per million), are temperature compensated, and of a fail safe design.
• Salinity Range : Designed for seawater use up to 50,000 ppm TDS (Nacl) (typical seawater salinity is 35,000 ppm.)
• Water Feed Temperature Range : Min. 33°F / .5°C Max. 122°F / 50°C
• Output Water Temperature Range : Ambient to feed water temperature
• Feed Water Flow Rate : 4.5 gpm / 17 lpm (depending on system)
• Chlorine Tolerance : 0.1 ppm
• pH Range : 3-11 (typical seawater pH is 8)
• Pressure Rating : Feed Water Minimum: 6 psi / .41 bar / .42 Kg/cm2; Maximum: 35 psi / 2.41 bar / 2.46 Kg/cm2
• Operation Type : Seawater @ 35,000 ppm & 77° F / 25° C; Nominal: 850 psi / 56.5 bar / 57.66 Kg/cm2
• Weight : 70 lbs / 32 Kg
• Height : 26″/660 mm
• Width : 8″/200 mm
• Length : 11″/281 mm
• External Water Installation Connection Type : N/A
• Electrical Requirements : See Brochure Under Downloads