PST Technology s.r.l.
- Home
- Companies
- PST Technology s.r.l.
- Products
- PST - Model TJAP Series - Self-Priming ...
PST - Model TJAP Series -Self-Priming Centrifugal Deep Suction Electric Pumps
The self-priming centrifugal deep suction electric pumps series TJAP have been designed to pump clean water from wells of at least 4” when the water level is more than 8 m deep.
Most popular related searches
self-priming centrifugal electric pump
electric pump
self priming electric pump
self-priming centrifugal pump
centrifugal electric pump
suction pump
centrifuge
centrifugal pumping
centrifugal pump
water well
- Liquid temperature not higher than 35 °C for domestic use (CEI EN 60335-2-41) or 60 °C for other use, while the ambient temperature must not be higher than 40 °C
- Flow rate up to ~ 3,6 m3/h
- Heads up to ~ 50 m
MOTOR
The control motors are asynchronous, squirrel cage-type, closed, with external ventilation
- Incorporated motor protection and capacitor always on, for single-phase models
- The motor protection for three-phase models must be installed by the customer. Equipment compliant with current standards should be used
- Class of insulation:F-service:S1-Degree of protection: IP 44
- Terminal board protection: IP 54
- Pump body: cast iron G20 with anti-corrosive coating
- Motor bracket: in die casting aluminium UNI 5076 (cast iron for JAP 150-200)
- Ejector: cast iron G20 with anti-corrosive coating
- Diffusers, Nozzle & Venturi tube: Techno-polymer
- Impellers: polymer (stamped brass UNI-EN 12165 on demand)
- Pump shaft: stainless steel Aisi 304 (Aisi 420 F for JAP 80-100)
- Mechanical seal: carbon-ceramics