Silver - Model AJ-D Series -Batch Controller

• AJ-D series Batch Controller is suitable for various liquid; it can display instant flow, totalized flow and control purpose.
• Input a variety of flow sensor signals, such as vortex flow meter, turbine flow meter, electromagnetic flow meter, roots flow meter, oval gear flow meter, orifice plate, V-cone flow meter, Annubar, mass flow meter.,etc. it is cheap price batch controller.
• Flow input channel for batch meter: can receive frequency signal and a variety of analog current signals;
• Temperature input channel: batch meter can receive a variety of analog current signal;
• Can provide transmitter with +12V DC or + 24V DC power supply with short circuit protection function, simplify the system;
• Fault-tolerant function: when temperature/density compensation measuring signal is abnormal, carry out compensation operation manually and set the corresponding value;
• Batch counter has Flow re-transmission function, it can output current signal, update cycle is 1 second to realize auto batch control function.
• Meter clock and timing automatic meter reading function, print function, provides the convenience for measurement management;
• Rich self-test and self diagnosis function makes batch controller easy maintenance.
• Three password prevents unauthorized personnel changes.
• The batch controller without any potentiometer, code switch adjustable device, so as to improve the instrument seismic resistance, stability and reliability;
• Communication function: can carry out data communication through a variety of means of communication with the host computer, RS-485; RS-232;

Input signals for batch meter

Analogue

• Resistance: Standard thermal resistance --Pt100;
• Current: 0~10mA, 4~20mA,input impedance≤250Ω)

Pulse

• Wave form: an rectangular shape, sine wave and triangular wave;
• Amplitude: more than 4V;
• Frequency: 0 ~ 10KHz (or according to user requirements).

2. Output signal for batch counter

Analog output:

• DC 0~10mA(Load resistance≤750Ω);
• DC 4~20mA(Load resistance≤500Ω);

3. Switch output for batch controller

• Relay output –with hystersis, AC220V/3A; DC24V/6A(Resistance Load)

4. Communication for batch controller

• Interface mode-RS232C,RS485,Ethernet;
• Baud rate:600, 1200, 2400, 4800,9600Kbps

5. Feed output

• DC24V,load≤100mA;
• DC12V,load≤200mA

6. Characteristics of batch meter

• Measuring accuracy: ± 0.2%FS ± 1 word or ± 0.5%FS ± 1 word
• Frequency conversion accuracy: ± 1 pulse (LMS), generally better than 0.2%
• Measuring range: -999999 ~ 999999 words (instantaneous, compensation value)
• In 0 ~ 99999999.9999 words (Totalized value)
• Resolution: ± 1 word

7. Display mode of batch counter

• Historical cumulative flow, instantaneous flow, medium temperature, medium density, flow (differential current, frequency), clock, alarm status;

8. Control / alarm of batch controller

• Select relay up/lower limit control (or alarm) output
• Control (or alarm) is with hysteresis
• Alarm: flow rate up and lower limit; temperature up and lower limit;

9. Protection of batch meter

• Power accumulated value time more than 20 years;
• Automatic reset, power supply under pressure;
• Abnormal automatic reset (Watch Dog);
• Resettable fuse, short circuit protection.

10. Working environment for batch controller

• Environment temperature: -20 ℃~60 ℃
• Relative humidity: ≤ 85%RH, avoid corrosive gas

11. Power supply of batch controller

• Conventional type: AC 220V % (50Hz ± 2Hz);
• Special type: AC 80~265V switching power supply;
• DC 24V ± 1V switching power supply;
• Backup power: +12V, 20AH, can last 72 hours.

12. Power consumption

• ≤10W(AC220V)