CDR Pompe S.r.l.
- Home
- Companies
- CDR Pompe S.r.l.
- Products
- CDR - Model UCL / UCL-B - Single-stage, ...
CDR - Model UCL / UCL-B -Single-stage, Mechanical Seal Centrifugal Process Pumps
FromCDR Pompe S.r.l.
Single-stage, mechanical seal centrifugal process pumps lined with plastic and fluoroplastic materials. Available materials: PP (polypropylene), PVDF (polyvinylidene fluoride), PFA (perfluoroalkoxy). Long coupled (UCL) and close-coupled (UCL-B) execution.
Most popular related searches
centrifugal process pump
process pump
mechanical seal pump
centrifugal pumping
centrifugal pump
horizontal centrifugal pumping
horizontal centrifugal pump
mechanical sealing system
sealing system
split case volute
Versatility: Suitable for pumping corrosive, aggressive and hazardous liquids (slightly contaminated, clean, low viscosity) in the chemical, petrochemical and pharmaceutical industries.
Reliability: Various mechanical seals can be installed on UCL pumps. A redesigned bearing support ensures a longer service life even under critical service conditions.
Design: UCL pumps have the same hydraulics as the UTN magnetic drive series, process pumps for the chemical industry.
UCL
- Sealing System: Mechanical Seal
- Design: EN 22858; ISO 2858; ISO 5199
- Casing Material: PFA Lined – PVDF Lined – PP Lined
- Casing Type: Radially split-Volute Casing
- Impeller Material: PFA Lined – PVDF Lined – PP Lined
- Impeller Type: Closed, Radial
- Nozzle Position: End Suction
- Execution: Horizontal – Long-Coupled
- Pull-out Design: Yes
- Heating Jacket: NA
- Connection Type: Flange
- Flanges: UNI 1092-2 (ISO 7005-2) PN16RF
- slotted to ANSI 150
- Self-priming: Non-priming
- Lubrication: Oil lubrication
- Maximum Pressure Rating @20°C: PN 16
- Fluid Temperature Range: PP: -10°C / +70°C
- PVDF: -30°C / +100°C
- PFA: -50°C / +140°C
- Maximum Head @2900 RPM: 75 m
- Maximum Flow Rate @2900 RPM: 250 m3/h
- Viscosity Range: 0.5 cSt – 180 cSt
- Maximum Installed Power: 55 kW
UCL-B
- Sealing System: Mechanical Seal
- Design: EN 22858; ISO 2858; ISO 5199
- Casing Material: PFA Lined – PVDF Lined – PP Lined
- Casing Type: Radially split-Volute Casing
- Impeller Material: PFA Lined – PVDF Lined – PP Lined
- Impeller Type: Closed, Radial
- Nozzle Position: End Suction
- Execution: Horizontal – Close-Coupled
- Pull-out Design: Yes
- Heating Jacket: NA
- Connection Type: Flange
- Flanges: UNI 1092-2 (ISO 7005-2) PN16RF
- slotted to ANSI 150
- Self-priming: Non-priming
- Lubrication: NA
- Maximum Pressure Rating @20°C: PN 16
- Fluid Temperature Range: PP: -10°C / +70°C
- PVDF: -30°C / +100°C
- PFA: -50°C / +140°C
- Maximum Head @2900 RPM: 75 m
- Maximum Flow Rate @2900 RPM: 120 m3/h
- Viscosity Range: 0.5 cSt – 180 cSt
- Maximum Installed Power: 18,5 kW