Stilmas S.P.A.
- Home
- Companies
- Stilmas S.P.A.
- Products
- Stilmas ThermoPharma - Model BD - ...
Stilmas ThermoPharma - Model BD -Equipped with Side Channel Blower
FromStilmas S.P.A.
Material of construction: aluminium for body and rotor, nickel plated (chemical deposition FDA approved) to form a passive surface, inert to the aggression of the ultrapure steam, AISI 316L for the shaft. Rotor installed on two external bearings with FDA approved mechanical seals. Low/Medium rotational speed (less than 2000 rpm), implying low noise and a simple mechanical execution. Limited and easy maintenance.
Most popular related searches
water distillation
side channel blower
water distiller
water softening
channel blower
steam distillation
cooling water
thermocompressor
produced water
water cooling
Standard models capacity:
- Series FA-HRS: capacity from 50 to 4500 lts/h
- Series BD: capacity from 100 to 24.000 lts/y
- Possibility to produce cold distillate water at 25°C or hot distilled water at 85°C
- No need of cooling water
- High energetic performances thanks to a careful design of the compressors and to an optimized configuration of the heat recovery system
- Highly efficient non condensable gases removalthanks to the hydrostatic column system downstream the still
- Design of the compressors - side channel type in aluminium with FDA approved nickel plating to guarantee the quality of the steam / distillate
- Possibility to fed the unit with softened water
- Distilled water produced pressurized, not requiring any pressurizing system
- Fast response: in stand by conditions the distillate is produced in 10 minutes
- Atmospheric pressure operation: no need of pressure vessel certification
- Reduced and easy maintenance: thanks to a proper selection of compressor technology, low/medium rotational speed