- Home
- Companies
- Amazon Filters Ltd.
- Products
- SupaPore - Model TT - Pleated Membrane ...
SupaPore - Model TT -Pleated Membrane Filter Cartridge
SupaPore TT Microfiltration cartridges have been specifically designed for use in corrosive gases and liquid processing applications. A naturally highly hydrophobic PTFE membrane and fluoropolymer structure makes this the cartridge of choice where high resistance to aggressive fluids is required.
- A naturally hydrophobic PTFE membrane
- FEP/PFA hardware
- Extremely low flush requirements in high purity applications
- Excellent chemical compatibility
- Low protein binding characteristics
- Materials meet the requirements of 21CFR Part 177 and current USP Plastics Class VI - 121ºC and ISO10993 equivalents
- Fully integrity testable by bubble point or diffusion flow test
- Operational temperature up to 150ºC
All cartridges are thermally bonded and adhesive free. Each unit is pre flushed with ultra pure water and integrity tested before final assembly.
They are available in a range of absolute pore sizes:
- 0.05µm
- 0.10µm
- 0.20µm
- 0.45µm
- 1.0µm
Suitable for most sanitisation regimes including steaming, autoclaving, hot water flush and all common sanitising agents.
Amazon Filters manufactures a comprehensive range of filter housings for SupaPore TT cartridges including the industrial 50 and 60 Series and the 70 Series for hygienic applications. Please consult our Sales Office for further details on the full range. Flouro-polymer lined housings are available for arduous applications that match the chemical resistance of the SupaPore TT cartridge.
- Full Fluoropolymer construction results in a cartridge that withstands long term exposure to Ozonated water
- Validated removal ratings for consistent and reliable performance
- Capable of high temperature operation for extended periods
- High chemical resistance to most solvents
- Very high resistance to most oxidising agents
- Resistance to virtually all acids and alkalies
- Full Product guide available
Dimensions
Outside Diameter: 70mm
Typical Surface Area: 0.63m2 (Per 10")
Length: See ordering guide
Maximum Operating Conditions
Temperature: 150°C
Recommended Maximum Differential Pressure: Forward Flow: 5.5 Bar @ 24°C, 2.0Bar@125°C, 1.0 Bar® 150°C
Reverse Flow: 3.4 Bar @ 24°C, 1.0 Bar® 121°C
Materials of Construction
Filter Media: PTFE
Media Support: FEP
Cage, Core & End Caps: PFA
Food and Beverage: Ozonated water
Pharmaceutical: Ozonated water, solvent filtration, high temperature air/gas
Fine Chemicals: Ozonated water, solvent filtration, high temperature air/gas, acids
Electronics: Ozonated and high temperature UPW, photolithography chemicals