Steroglass - Model S20 +5/+40°C HRSH090 -Thermo Chiller

The HRSH090 thermo-chiler is therefore the optimal choice in combination with a Strike 20 or a Pilot Reactor Steroglass.

The use of a Thermo-chiller will guarantee you not only reliability and precision, but also safety.

Thanks to the presence of the three inverters which respectively control the number of rotations of the compressor, fan and pump motor, electrical consumption is reduced by up to 53%.

The HRSH series accurately monitors and controls the cooling system, so you can take care of something else.

Use a smart solution that will give you proactive control. Predict any changes via remote control and manage anomalies and problems in the cooling system.

Improve the performance and reliability of your machine with superior temperature stability.

Through the simultaneous control of the compressor and the fan of the DC inverter, and of the electronic expansion valve, a temperature stability of ± 0.1 ° C is maintained even when the thermal load fluctuates significantly.

PRACTICAL FUNCTIONS

• Timer function
• Unit conversion function
• Automatic restart function for power failure
• Anti-freeze function
• Key lock function
• Signal emission to complete the preparation
• Independent operation of the pump
• Self-diagnosis function
• Serial communication communication ports (RS232C / RS485) and contact I / O (2 inputs and 3 outputs) supplied as standard

EXAMPLES OF APPLICATION

• Solvent condensation in Strike 20 rotary evaporators
• Vapor condensation in Pilot Reactor
• Steam condensation in distillation equipment
• Laser processing machines
• Laser welding machines
• Laser cutting machines
• Cleaning machines
• Printing machines
• Injection molding
• Arc welding machines
• Resistance welding machine (spot welding)
• High frequency induction heating equipment
• Cooling water available anytime, anywhere

• Cooling method: Air cooling
• Refrigerant: R410A (HFC)
• Refrigerant charge: 1.32 Kg
• Control system: PID control
• Ambient temperature / humidity / altitude: Temperature: 5 to 45 ° C

Circulating fluid system:

• Circulating fluid: Tap water, 15% ethylene glycol aqueous solution, deionized water
• Operating temperature range: 5 to 40 ° C
• Cooling capacity (50/60 Hz): KW 9.5
• Heating capacity (50/60 Hz): KW 2,5
• Temperature stability: ± 0.1 ° C

Pump:

• Nominal flow rate (50/60 Hz): 45 l / min (0.5 MPa)
• Maximum flow rate (50/60 Hz): 60 l / min
• Maximum lifting height (50/60 Hz): 50 m
• Adjustable pressure range: 0.1 0.5 MPa
• Maximum operating flow: 20 l / min
• Tank capacity: L 18
• Circulating fluid inlet and outlet port: G 1
• Tank drain connection: G 1/4
• Material in contact with the fluid:
• Metal Stainless steel, copper (heat exchanger brazing), brass (pump, Y-filter), carbon, SiC
• Resin PE, PVC, POM, PTFE, NBR, EPDM, FKM

Electric system:

• Power supply: Three-phase 380 to 415 V AC (50/60 Hz)
• Permissible voltage range: ± 10% (Without DC voltage fluctuation)
• Leakage switch applicable ground:
• Rated current: [A] 20
• Sensitivity of leakage current: [mA] 30
• Rated operating current: [A] 8
• Electric absorption: [kW (kVA)] 5.0 (5.6)
• Noise level (front 1 m / height 1 m): [dB (A)] 66
• Dimensions (LxWxH): mm 377x970x1080
• Weight: kg 130