- Home
- Companies
- Reaction Distributing Inc.
- Products
- Tri-Pak - Model TB6030 Series - ...
Tri-Pak - Model TB6030 Series -Vertical Balers
Tri-Pak vertical balers are engineered to cater to a diverse range of recycling requirements, offering models from the TB-4527 series that handle 100-pound bales to the TB-7230 series capable of producing 2,000-pound bales. These balers are built to conform to ANSI Z245-2013 standards, ensuring compliance with OSHA, CSA, UL, and MOL electrical and guarding regulations. Each baler is equipped with dual safety circuits and tamper-resistant coded magnet safety sensors for enhanced operational safety. An innovative chain-free bale ejection system, activated from the baler`s front, utilizes the cylinder to automatically discharge the completed bale. The PLC-based control panel simplifies operations, notifying the user with a `bale full` light, eliminating the need for manual chamber checks. Users can upgrade with options such as SCADA-based monitoring, rear wire guides, and bale counters to optimize efficiency and minimize service interruptions.
Tri-Pak vertical balers are available in a wide range of sizes and capacities ranging from the TB-4527 series that produces a 100 pound bale to the TB-7230 series that can produce 2,000 pound bales. Every baler meets/exceeds the latest ANSIZ245-2013 specifications as well as the current OSHA, CSA, UL and MOL electrical and guarding regulations. Dual safety circuits are standard as are tamper resistant coded magnet safety sensors. Every baler is equipped with a chain free bale ejection system that is engaged from the front of the baler and uses the baler’s own cylinder to automatically eject the finished bale out of the bale chamber. The PLC based control panel alerts the operator via a “bale full” light when a full bale condition has been achieved. There is no longer any need for the operator to visually check to see how full the baling chamber is getting. Every baler can be upgrades with rear wire guides, bale counters, front door tie slots and a SCADA based baler monitoring system that is able to monitor all of the balers systems to reduce down time and gray area service calls.
- UL/CSA Approved Design
- Meets/exceeds ANSI Z245.2 regulations
- Meets/exceeds OSHA regulations
- PLC “flex-design” based control systems
- NEMA 4 rated enclosure
- Internal timers prevent system run-on
- Self-diagnostic indicators
- 24-volt controls
- Adjustable multi-cycle timer
- 75% and 100% full light
- Auto-alert maintenance mode
- Heavy duty oil-tight pushbutton controls
- Key lockable start pushbutton
- Deep Chamber (42")
- Full bale light
- Hydraulic bale dump
- R.H. hinged bale door
- Barn style feed doors
- Rear wire guides
- Control System 110 volt 60 cycle powered by step-down transformer
- Control Panel Fully wired. Keyed start button, emergency stop, full lights, reset button
- Power 208/230/575 volt, 3 phase 60 cycle