- Home
- Companies
- Unitfine Machinery Co., Ltd.
- Products
- UF Ceramic Slurry Vibrating Screen
UF Ceramic Slurry Vibrating Screen
Our vibrating Separator & Filter with the normal specification are made of stainless steel SUS27（304#）at contacting part between machine body and untreated material, and the pedestal is steel S.S.41．We also accept special orders according to your requirements．We have designed many different types such as: airtight type, edged-adding type, gated type, direct-discharging type, water-injection type, moving-wheel type etc.
We adopted the new type vertical motor which can make the movement into the 3-D movement: i.e.: horizontal, vertical and incline movement and then pass the movement to the screen surface．
While adjusting the phase angle of hammers at upper and lower ends of motor, the movement path of material on the screen surface can be changed.
- This filter is the patented products of our company, by People’s Republic of China State Intellectual Property Office review.
- The filter adopts the International brands – Italy Oli-Wolong Vibrator. With low noise, small volume, light weight, low power consumption, strong overload capacity, quick-start-stop characteristics, is a new generation of environmentally friendly products.
- With Z type screen frame, change the sieve very easy.
- Mesh is not blocked, no material phenomenon splash, impurity automatic discharge, continuous operation.
- The material could be AISI304 or AISI 316.
Purpose
- The filter is mainly used for the ceramic slurry filtration initial time. And now, it’s widely used for the high-throughput filtration.
- Solid-liquid separation: this kind of device can be used in single, double; can be very effective for dealing with solid and liquid mixture rapidly for solid-liquid separation and filters to filter out different mesh material.
- Impurity: Could be remove a lot of liquid fraction of miscellaneous materials of different sizes, and separated fast.
Requirements:
- Uniform feeding, feeding amount should be equal to the discharge amount. If feeding too much at one time, it will be hindering the normal movement in the screen surface. This will not only loose mesh, but also reduce the amount of processing. Meanwhile, the sudden increase in motor load will reduce motor life.
- Put an end to a strong impact force feeding methods, should be retrofitted surge hopper. If the material is a direct impact on the net surface, not only consume the exciting force generated by the vibration source, causing more damage and mesh sieve fatigue, and impact screening filter production.