- Home
- Companies
- RefleX UV Chambers - NeoTech Aqua ...
- Products
- NeoTech RefleX - Model D322 - UV ...
NeoTech RefleX - Model D322 -UV Disinfection Chambers for Water Treatment
The RefleX D322 UV Disinfection Chambers offer a compact and efficient solution for water disinfection, suitable for a range of industrial and commercial applications. Utilizing patented technology, these chambers reflect 99.8% of the 254 nm UV light back into the chamber, optimizing exposure and ensuring effective pathogen inactivation. Their design reduces the physical footprint by 75% compared to traditional systems and operates with a single high-output amalgam lamp, minimizing energy consumption by up to 75%. The system operates on either 120V or 230V single-phase power and incorporates advanced controllers capable of managing up to four separate chambers. For ease of maintenance, the lamps can be replaced without tools, and the UV monitor is designed for simple swapping during operation. Certified by NSF 50 and NSF 61, as well as TUV safety standards, these chambers represent a robust option in the water treatment industry. They are engineered to achieve high UV transmission (UVT) even with particles present, ensuring comprehensive disinfection.
The NeoTech D322 is specially designed to disinfect water and is an essential component in advanced oxidation processes. This high-efficiency UV system utilizes NeoTech Aqua’s patented ReFleX chamber technology, reflecting over 99% of the 254nm UV generated. It is the highest efficiency, smallest footprint, and lowest operating cost UV system in the water treatment industry. With only a single twenty-two inch lamp, the D322 provides users the most convenient and lowest cost service schedule of any low pressure or medium pressure UV system today.
Maximum UV Penetration
The NeoTech D322 provides users an unparalleled level of engineering sophistication by maximizing UV distribution in a patented 99% reflective chamber. This unique technical advantage also reduces the number of lamps and power requirements by up to 90% compared to standard UV systems.
Minimal Maintenance and Service
The service and maintenance requirements for the NeoTech D322 are limited to three basic requirements:
- Lamp Replacement: No Tools Required
- UV Monitor: May be changed with a single screwdriver while the system is operating
- Cleaning: May be cleaned as needed in a CIP loop or manually brushed.
Unparalleled Efficiency
The NeoTech D322 boasts the smallest footprint in its class. With as few as onetenth as many bulbs compared to standard UV systems, it has the lowest operating cost and maintenance schedule in the field.
- Single lamp efficiency processes up to 100 gallons per minute
- 75% smaller footprint compared to standard UV systems
- May be mounted vertically or horizontally
- Up to four units may be controlled with a single micro-control box
- Built for 120V or 230V single phase power providing maximum flexibility
- No flow, no problem – guaranteed 60 minutes
- Water contact finish – Ra-15
- Controller- Remote
- Alarms, Remote Control, 4-20 mA output
- Real time dosimetry, 100% dosage assurance – with constant flow
- UV monitor is NIST traceable
- Sanitization in place – hot water or steam
- No-tool lamp change
- NSF Standard 50 certified
- Warranty one year parts and labor
Flow Rate - gpm (m3/hr.) - 99% UVT @ 40mJ/cm2^ 100 (22.7)
Flow Rate - gpm (m3/hr.) - 99% UVT @ 30mJ/cm2^ 100 (22.7)
Flow Rate - gpm (m3/hr.) - 95% UVT @ 40mJ/cm2^ 100 (22.7)
Flow Rate - gpm (m3/hr.) - 95% UVT @ 30mJ/cm2^ 100 (22.7)
Number of High Output Amalgam Lamps 1
Lamp Life - Hours* 9000
Operating Power - watts 98
Operating Pressure - psi (bar) 150 (13)
Operating Temperature - ºF (ºC) 36 - 104 (2 - 40)
Pressure Drop at rated flow - psi (bar) 2.5 (0.22)
Dry Weight - pounds (kg) 37.8 (17.2)
Dimensions (L x H x D) - inches 23.2 x 7.4 x 9.0
Dimensions (L x H x D) - millimeters 590 x 189 x 230
Sanitary Fittings - Standard+ 2 in.