Wacker Neuson - Model ET18 -Tracked Conventional Excavator

Hydraulic joystick operation
The ergonomic and sturdy joysticks, which work completely proportionally, expand the functions and possibilities for controlling the excavator. The operator can carry out movements more precisely and work with increased concentration.

Powerful drive system
Thanks to the high performance of the drive system, the maximum power of the excavator is available at every point of operation. This brings up to 30% higher power for an even better performance.

Hydraulic telescopic travel gear with dozer blade extension
The hydraulically telescoped travel gear with a max. outer width of 1300 mm gives stability. In no time, it can be retracted to a width of 990 mm. With the foldable dozer blade extension, this makes individual adjustment to the job site conditions possible. Meanwhile, the extension elements are always connected to the machine and thus do not get lost.

VDS Vertical Digging System
The vertical digging system compensates for slopes of up to 15 degrees, making it possible to vertically excavate on a slope. This is not only ergonomic for the operator, but it also saves time and also means less excavated material.
Up to 25 percent material and time savings when excavating and filling. Safe working and higher stability in sloping spaces.
The same swing power over 360 degrees allows fatigue-free work with the seat position remaining the same.

Second cabin door for entry and exit on both sides
The excavator cabin can be optionally equipped with a second driver’s door. This makes getting in and out easier, especially in narrow or sloped spaces.

• Operating Data:
• Shipping weight min.: 1,582 kg
• Operating weight min.: 1,725 kg
• Biting force max. : 11.2 kN
• Breakaway force max. : 18.8 kN
• Digging depth max.: 2,397 mm
• Dumping height : 2510 - 2722 mm
• Digging radius max.: 3,989 mm
• Superstructure slewing speed : 10 1/min
• L x W x H : 3854 x 990 x 2289 mm
• Engine / Motor
• Engine / Motor manufacturer : Yanmar
• Engine / Motor type : 3TNV76
• Engine / Motor : Water-cooled 3-cylinder diesel engine
• Displacement : 1,116 cm³
• RPM / speed : 2,200 rpm
• Engine performance acc. to ISO: 13.4 kW
• Battery Voltage: 44 Ah
• Tank capacity : 24 l
• Hydraulic System
• Duty pump : Double variable pump with 2 gear pumps
• Flow rate max.: 23.8 l/min
• Operating pressure for working and traction hydraulics: 200 bar
• Operating pressure Slewing gear: 125 bar
• RPM / speed Superstructure: 10 rpm
• Hydraulic oil tank Contents: 19 l
• Wheel set
• Travel speed max.: 5.3 km/h
• Chain width : 230 mm
• Ground clearance Standard undercarriage: 210 mm
• Dozer Blade
• Width : 990 mm
• Height : 230 mm
• Stroke Standard dozer blade above ground: 200 mm
• Stroke Standard dozer blade below ground: 320 mm
• Sound Level
• Sound level (LwA) acc. to 2000/14/EC: 93 dB(A)
• Cabin - specified sound pressure level LpA acc. to ISO 6394: 75.8 dB(A)

Performance
2 travel speeds

• The excavator is equipped with a second travel speed level as standard. This allows him to quickly change position on the construction site and\nsave valuable time.

Compact dimensions

• High safety during transportation, cost and time savings, high flexibility. The excavator scores points with its low entry height, small external dimensions thanks to intelligent component arrangement and ensures greater stability thanks to its low center of gravity.
• Whether for transportation or in confined spaces: Thanks to its compact design, the excavator can be easily transported to the next job site. And on the construction site, the machine can get anywhere quickly and easily, even in confined spaces - for high efficiency in every application.

Variety

• Numerous attachments : Thanks to the optional additional control circuits, the excavator can be equipped with a wide range of attachments. This allows you to increase your application options and thus the utilization of the machine in no time at all.
• 2 lifting eyes on the roof : The machine can be moved very easily and without any problems on the construction site using a crane. Loading and unloading the excavator from the truck can also be done quickly.