- Home
- Software
Refine by
Geosoft Environmental Software
16 software items found
by:Geosoft International based inTurin, ITALY
ISOMAP is the module that is used to calculate and render surfaces through contour lines or coloured and shaded areas with a high degree of precision. The program allows the representation of the surface both in topographic map and perspective view forms. The calculation is performed in two stages. The first stage consists of creating a regular grid from a collection of arbitrarily positioned ...
by:Geosoft International based inTurin, ITALY
ELETOM is a software that performs complete 2D inversion (and not the simple iterative deconvolution of the pseudo-sections) of surface electrical surveys with any measurement array (Wenner, dipole-dipole, pole-dipole, pole-pole, user defined arrays, mixed arrays) with a maximum of 64 electrode positions that can be added by the user as required. ELETOM uses the finite elements method (FEM) in ...
by:Geosoft International based inTurin, ITALY
ROCK3D is a program for stability analysis of removable blocks on planar rock slopes. It identifies and analyses all the blocks that have formed under each kinematic mode. Once the geometry of the rock blocks has been identified, the bolt forces necessary to reach a required safety factor are calculated. The structural geology data collection is carried out through the introduction of the joint ...
by:Geosoft International based inTurin, ITALY
CLU-STAR is a program for computerised structural geology data collection and analysis. The program recognises the discontinuity sets of a rock mass through hierarchical and non-hierarchical clustering procedures derived from the multivariate analysis. These clustering procedures operate directly on the collected data instead of on their statistical distribution; the results are consequently ...
by:GEOSOFT Sp. z o.o. based inWroclaw, POLAND
Geo DB is a suite of integrated databases, analytical programs and graphic tools. It allows you to save virtually any geological and geotechnical information from field research, drilling and laboratory tests in the database, analyze and create documentation (borehole logs, reports, charts, sections, maps, ...
by:Geosoft International based inTurin, ITALY
Ce.Ca.P. is a complete package for the analysis and design of foundations; because of its completeness, flexibility ad user-friendliness it is a fundamental instrument for any kind of geotechnical project. To calculate the bearing capacity of foundations, the following methods can be used: Terzaghi, Meyerhof, Hansen and Vesic. Such methods are based on different hypotheses regarding failure ...
by:GEOSOFT Sp. z o.o. based inWroclaw, POLAND
SEISMIC-pro software allows User to filter, analyze and interpret raw SCPT data generated in seismic test, as well as to generate reports with results of analysis. Implemented editor of mathematical formulas (under construction) allows User to generate own interpretation formulas and calculate geotechnical parameters. ...
by:Geosoft International based inTurin, ITALY
The program analyses the behaviour of the rock slopes under seismic conditions. It evaluates the displacements of a rock block subject to dynamic forces, on the basis of a given accelerogram. The use of a calculation method based on a given accelerogram for rock slope stability analysis allows one to take into account the duration and the intensity of the accelerogram itself (this not being the ...
by:Geosoft International based inTurin, ITALY
I.L.A. is a complete slope stability analysis program that also incorporates powerful features for retaining system designing. The slope analysis and design can be performed using the Sarma method, whose numerical stability increases the reliability of the calculations. The classic Bishop, Jambu, Morgenstern & Price and Bell methods are also available; this allows to compare the results and ...
by:W_GeoSoft based inBioley-Orjulaz, SWITZERLAND
With Digitize_BMP allows you to display a map or picture (BMP or JPG) and pick XY value along a road, any limit. Data format can be degree, minutes, seconds, degree and decimal are kilometric grid. Coordinates are saved in a text file.The software is user friendly and can be used very intuitively. Digitize_BMP run under all 64 bits ...
by:Geosoft International based inTurin, ITALY
The program classifies rock masses using both the Bieniawski and the Barton methods, making it thus possible to compare the results that can be obtained with the two most frequently used classification methods. The Bieniawski classification (RMR Index) evaluates different parameters to which a numerical coefficient is assigned. The sum of these coefficients determine the Rock Mass Rating class ...
by:GEOSOFT Sp. z o.o. based inWroclaw, POLAND
The new module of the CPT-pro package - CPT-CAD - contains a set of tools enabling automatic generation of geological and geotechnical sections and maps based on information contained in interpreted CPTU soundings and information contained in the geological and geotechnical database GEO DB. The implemented CAD-type graphics enable the creation of this documentation in the DWG and DXF format and ...
by:GEOSOFT Sp. z o.o. based inWroclaw, POLAND
CPT-pro is a multi-module program for comprehensive analysis, interpretation and presentation of CPT / CPTU soundings, DPT and SPT dynamic soundings, DMT dilatometer test and other field tests such as FFD and EC. Methods of CPT sounding interpretation along with formulae and graphs have mostly been extracted, with the knowledge and consent of the authors, directly from the ...
by:Geosoft International based inTurin, ITALY
This program perform all the function of the Isomap package and can be considered as it extension. Most of the complex problems related to ground-water modeling can be solved with INQUIMAP. It allows the geometric modeling of the water table and the insertion of one or several wells, flooded areas, barriers and impermeable barriers, recharge points and variations in permeability. The obtained ...
by:Geosoft International based inTurin, ITALY
ROTOMAP is a three-dimensional model that is used for rockfall analysis and the design of rockfall protective systems. This module belongs to the Isomap family: please check the ISOMAP page for a complete description of the main module features. ROTOMAP uses a statistical approach; it simulates a large number of rockfalls and, through the analysis of the distribution of the average and maximum ...
by:GEOSOFT Sp. z o.o. based inWroclaw, POLAND
PIEZO-pro software is dedicated for storing and analysis of piezometer data, combined with air pressure, temperature and other data like external load, water level behind the dam etc. It is available both - as single workstation version and network version, integrated with Oracle orMS SQL Server. Internet access to databases can be ...