Only show results in Massachusetts? Ok

Soil & Groundwater Applications

  • Premium

    UV fluorescence technology for monitoring oil in power plant cooling water

    The TD-4100 utilizes a non-fouling, non-contact flow cell which requires little to no maintenance, and uses fluorescence technology to accurately detect oil in water from low ppb to high ppm. For this application, the TD-4100 monitors oil in water at 1 to 5 ppm and signals an operator with an alarm when the concentration exceeds the high alarm relay set-point.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Premium

    Water and wastewater treatment solutions for power generation sector

    No energy without the engineering and excellence of Enexio. The overall efficiency of thermal power generation (called “Carnot cycle”) inherently depends on the „cold-end” of the cycle, where the waste heat is dissipated by the heat sink: The cooling system of the power plant. This actually is the part of a power plant where ENEXIO supports its customers and partners with its rich product portfolio ranges from all dry air cooled condensers (ACC) and Heller Technologies to all wet cooling...

    By ENEXIO Water Technologies GmbH based in Hürth, GERMANY.

  • Premium

    Visual inspection solutions for the borescopes for turbine and turbine components inspection

    Turbines and generators are important pieces of machinery that need to be properly maintained and repaired to ensure maximum service life and safety. Non destructive remote visual inspection of turbines with a video borescope is a cost effective and efficient way to inspect without having to disassemble a turbine. Steam and gas turbines run at extremely high pressures, and they need to be kept in good mechanical shape to efficiently do their jobs. Not only is efficiency a concern, no one wants to learn there is a...

    By Fiberscope.net by Medit Inc. based in Winnipeg, MANITOBA (CANADA).

  • Premium

    Erosion and dust control products for energy

    When considering applications to keep fugitive dust off of photovoltaic panels consider Envirotac. The buy back a site receives in efficiency and maintenance is nearly instant. When access roads are treated with Envirotac it will keep the applied areas dust free. This will control dust in place and not let it become airborne where it will ultimately settle on the panels. If surrounding areas release dust into the atmosphere use a light application of Envirotac at less than a penny a square foot to keep it from...

  • Premium

    Visual inspection solutions for power generation industry

    Medit provides non-destructive inspection products and solutions including video borescopes, fiberscopes and pipe cameras for key power generation applications, including those for fossil fuels, nuclear energy, and renewable energy transmission and distribution. Our reliable, advanced inspection solutions, and support, enable power generation customers to maximize efficiency, minimize downtime and enhance productivity with unyielding integrity.

    By Fiberscope.net by Medit Inc. based in Winnipeg, MANITOBA (CANADA).

  • Premium

    Industrial process measurement & automation solution for power & energy

    Power plants play a vital role. We help minimize downtime while delivering safety and productivity. Whether your power plant serves the needs of ordinary homes, hospitals or factory production lines - the world needs reliable and safe power, and you need profitability. At Endress+Hauser, we bring precision and safety to power plants all over the world.

    By Endress Hauser AG based in Reinach, SWITZERLAND.

  • Premium

    Industrial process measurement & automation solution for utilities - steam

    Rely on Endress+Hauser to improve your steam energy production and industrial water treatment. Optimizing core processes is a given in many industries. But the processes that are not directly related to the actual product - like steam generation for energy or the industrial water treatment – also offer huge potential for optimization with regards to efficiency, safety and compliance.

    By Endress Hauser AG based in Reinach, SWITZERLAND.

  • Industrial and commercial water filtration for energy reduction

    It is important in all sectors these days that companies look for energy reduction when it comes to water filtration, as they would look at reducing their carbon footprint. The correct water filtration system can not only assist with reducing water and carbon footprints, but can also reduce costs and increase efficiency and output.

    By Hydro-Gen Engineering Ltd based in Widnes, UNITED KINGDOM.

  • Geomembrana for Energy Application

    Geomembrana (geomembrane) is the widely used HDPE geomembrane liner and geotechnical engineering materials energy applications. BPM high quality geomembrane products had proven the practical solutions for such energy applications as Biogas Digeste, storage tank, evaporation and cooling ponds. In order to control the environmental impact of increased energy use and exploration, as the one of the leading HDPE geomembrane liner manufactures, wholesalers and exporters, BPM had been always providing the finet quality...

    By Best Project Material Co., Ltd (BPM) based in Taian City, CHINA.

  • Mixers, dryers, innovative solutions for power plant technology

    Conditioning of Ash and DustNo matter where ash and dust accumulate, AVA continuous or batch mixers can condition them to a transportable final product for disposal or recycling. The applications range from power plant ash derived from lignite, hard coal, biomass, or waste incineration power plants to filter dusts from steelworks and coking plants through to special applications such as hot or reactive ashes from various processes, such as shale oil production.

    By AVA GmbH u. Co. KG based in Herrsching, GERMANY.

  • Applications and Air Pollutants Removed in the Energy (Power) Industry

    Wet scrubbers and Wet electrostatic precipitators for removal of sulfur dioxide and trioxide, ash particulate, NOx and mercury from coal fired boilers. Sulfur dioxide, NOx and particulate from oil fired boilers and diesel engines. Ash particulate from Biomass boilers including Bagasse type. Complete scrubber systems for sulfur dioxide removal using lime, limestone to gypsum quality and all sodium, magnesium and potassium chemistry scrubbing solutions including ammonia for ammonium sulfate production. For gypsum...

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Assessing underground infrastructure for energy & refining industry

    Nuclear and coal are still significant means of producing energy for electricity which is crucial for daily functionality. In order to generate power that meets everyday needs, pipeline infrastructure at these facilities need to be well maintained. Proactive inspections of these pipeline networks can improve pipeline integrity and safety for owners of power generation assets, as well as be a cost-effective means of maintaining them. The nation’s economy depends on electricity being available 24/7. EnTech®...

    By EnTech Engineering Company based in Saint Louis, MISSOURI (USA).

  • Flow measurement instrumentation for steam flow measurement for facilities, district energy

    From facilities management to district heating applications, accurate steam flow measurement provides you with substantial savings on energy and maintenance costs. A multivariable mass vortex meter measures five process variables—mass flow rate, temperature, pressure, volumetric flow rate and fluid density—with one process connection.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Mercury Removal from Ash

    A by-product from burning pulverized coal in electric power generating plants, fly ash can contain substantial levels of mercury which can negatively impact human health and the environment. Responding to the threat of mercury exposure, the EPA has established tough standards for the power industry to meet. Vulcan® Systems Thermal Desorption Units remove mercury from fly ash, making the end product reusable for concrete production. Through this process, power plants are able to create a new revenue stream...

    By Vulcan Drying Systems based in Moberly, MISSOURI (USA).

  • Analytical and measuring instruments of energy and chemicals industry

    Energy comprises many types of modes by using complex processes to explore, extract, refine, produce and transport these products. The energy industry comprises: Fossil fuels: coal, petroleum and natural gas (conventional as well as hydraulic fracturing), including liquid propane gas and liquid natural gas. Non fossil fuels such as: hydroelectric, battery technology, hydrogen fuel cells, nuclear power. Renewable fuels such as: biofuels, hydrogen fuel cells, geothermal, solar (photovoltaic). Nuclear power.

    By Shimadzu Scientific Instruments Inc based in Columbia, MARYLAND (USA).

  • Emissions testing for engines

    Rich-burn engine exhaust, when uncontrolled, can have wide concentration ranges and both CO and NOX can fluctuate significantly. The on-board CO dilution system will automatically set-up for optimum testing, perfect for a rich burn engine. Lean-burn engines have different exhaust characteristics, but NO2 can make up a significant portion of the total NOX measurement. The 350 measures both NO and NO2 for proper lean-burn engine set-up. Due to high concentration, replaceable interference filters keep the sensors...

    By Testo, Inc. based in Sparta, NEW JERSEY (USA).

  • Superabsorbent for Energy & Infrastructure Drilling

    Horizontal directional drilling (HDD) activities for oil and gas extraction, pipeline construction, utility installations, and tunneling generate large volumes of fluid waste, often referred to as drill cuttings or drilling mud. HDD fluid waste can present operational challenges due to environmental regulations regarding the disposal of liquid waste.

    By Zappa-Stewart based in Westwood, MASSACHUSETTS (USA).

  • Pumping solutions for oilfield, refinery, energy sector

    GATOR Pumps can be found in a wide range of petroleum industry applications where continuous operation is key to profitability. Downtime for pump replacement or maintenance can cause significant investment loss and we can protect your operation with our rugged and reliable equipment. Gator Pump has extensive experience working in corrosive and abrasive fluids and easily handles heavy suspended solids. We can slurry and pump simultaneously and immediately lower your operation and labor costs. Talk with our engineeri...

    By Gator Pump,Inc based in Brownwood, TEXAS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you