Only show results in Virginia? Ok

Drill Bits equipment for Soil and Groundwater

  • Premium

    Cutting & Tapping Fluid Spray - 12 Cans/Case

    This thick clinging aerosol lubricant enhances the production capabilities of cutting a drilling bits and prevents friction damage. This product was designed to withstand rigorous operating conditions and extreme pressure to make cutting and drilling bits perform better at lower operating temperatures. It adheres to blades and bits with no fly off ...

    By Interstate Products Inc based in Sarasota, FLORIDA (USA). from Cutting & Tapping Fluid Spray - 12 Cans/Case Product line

  • Premium

    Model VR-KIT - Conduit Kit Model

    The kit includes 25 feet of non-metalic corrosion proof 3/8' conduit, a 90 degree water tight conduit fitting, 4 stainless steel conduit straps and 8 stainless steel strap screws. Also included is a 1/8 inch masonary drill bit. The Satinless steel strap screws are also tamper resistant. Used with VR-4 and VR-2100 for surface conduit wire routing.

    By Dorlen Products Inc. based in Milwaukee, WISCONSIN (USA). from Conduit Kit Model Product line

  • DTH Drilling Tools

    Sandvik's extensive range of tools for down-the-hole drilling includes hammers, drill bits and tool systems for simultaneous drilling-and-casing through difficult overburden. Combining advanced materials technology with skillful design focusing on performance, simplicity and endurance, our DTH tools give high productivity, great reliability and ...

    By Sandvik Mining and Construction B.V based in Amsterdam, NETHERLANDS. from DTH Drilling Tools Product line

  • RoofTrac - PV Mounting Systems

    RoofTrac makes every residential PV installation easy and cost effective, while still ensuring quality and safety. The above installation can be created for only $0.12/ WDC, including the cost of our ProSolar® decorative front skirt and our corrosion resistant aluminum and stainless steel hardware.

    By Professional Solar Products based in Oxnard, CALIFORNIA (USA). from PV Mounting Systems Product line

  • Vanguard - Directional Tricone Roller Cone Bits

    Decrease curve interval drilling time with newest directional roller cone bits. Vanguard Directional tricone roller cone bits are engineered specifically for your intense directional intervals with their demanding side and cyclical force loadings. These more reliable drill bits enable faster TD completion rates in the curves. 

    By Baker Hughes, a GE company based in Houston, TEXAS (USA). from Directional Tricone Roller Cone Bits Product line

  • Conventional Down The Hole Hammer Well Drilling Bit

    Holte offers unmatched experience designing and manufacturing conventional down hole hammers and bits. We have kept our same traditional conventional design for years, only to refine it into the efficient and durable design it has become today. Whether you need a bit to meet specific specifications for the ground conditions your faced with or you ...

    By Holte Manufacturing based in Veneta, OREGON (USA). from Conventional Down The Hole Hammer Well Drilling Bit Product line

  • Halco - 3` Drill Bits

    The Halco 3' Range of drill bi':s come in a range of sizes and face designs. Halco produce dri I bits to fit every mgjor branc of shank, but we can also manLracture drill bts to a cients own specifications. Below are an overview of the Hatco drill bit range.

    By Halco Rock Tools based in West Yorkshire, UNITED KINGDOM. from 3` Drill Bits Product line

  • Model 1-3 Inch - Drill Bits

    Convex Face: Strong design for all conditions especially hard abrasive rock. Good balance of fast drilling and long service life.

    By Halco Rock Tools based in West Yorkshire, UNITED KINGDOM. from Drill Bits Product line

  • Chevron Carbide Bit

    Designed for tougher drilling conditions in medium hard formations such as caliche and shale.

    By Blue Demon Co. Inc. based in Lebanon, GEORGIA (US) (USA). from Chevron Carbide Bit Product line

  • Diedrich Drill - Subs

    SUBS, SUBS, SUBS,.........those essential parts needed by every driller to connect from one size rod, casing, or bit to another size. We at Diedrich Drill understand the urgency involved when an entire job is stopped for lack of one sub. This is the very reason we stock about 4,000 various sized subs for all types of jobs and drilling ...

    By Diedrich Drill, Inc. based in LaPorte, INDIANA (USA).

  • Diamond - Model IRev - Impregnated Drill Bits

    In hard and abrasive environments, the Baker Hughes IRev™ infinite revolution impregnated bit improves run life while minimizing trips and the number of bits required. The IRev bit, with its new cutting structure technology, ultimately saves both time and money in challenging applications.

    By Baker Hughes, a GE company based in Houston, TEXAS (USA). from Impregnated Drill Bits Product line

  • BlockPack - Protection for Heavy Weights

    Improved protection for heavyweights. minimal force in opening and closing, but absolutely secure when closed, contoured tube ends together with stiffening ribs give a cushioning effect, with ratchet length adjustment, locking clamp holds outers and inners securely in place – integrated stoppers prevent uncontrolled opening, additional ...

    By Rose Plastic USA L.L.L.P. based in Coal Center, PENNSYLVANIA (USA). from Protection for Heavy Weights Product line

  • CobraCut - Structural Steel Drill Bits

    Drill and Cut 20% faster than other coolant-fed drills. CobraCut structural steel drill bits incorporate special cutting geometries specifically designed for structural steel drilling. Available in high speed steel and cobalt, 170 deg or 135 deg point with chipbreaker technology.

    By American Punch Company based in Euclid, OHIO (USA). from Structural Steel Drill Bits Product line

  • Palmer - 5-Wing PDC Bit

    The 5-Wing PDC drill bit is designed with speed and durability to break through hard formations. Our durable, open body PDC cuts through the most rock-solid formations resulting in higher penetration rates and lower project costs.

    By Palmer Bit Company based in Williston, NORTH DAKOTA (USA). from 5-Wing PDC Bit Product line

  • Teamwhole - Model DHD COP SD NUMA QL - DTH Hammer Application In Pile Foundation With Model NUMAQL DHD TK SD Shank

    1.Advantages of construction methodUse:DTH Hammer drilling is a good way to drill through cave formation and avoid stuck problemCave:When encountering caves,drill bit inclines to the cave.The stabilizer ensures the hole straightnessBit stuck´╝ŤOne reason is cave encounter,the drill bit deviates,and the entire set of drilling tools inclines in the ...

    By Changsha Tianhe Drilling Tools and Machinery Co.,L based in Ningxiang County, CHINA.

  • Hand Drill

    This Hand Drill for WallChek II Kit is used to drill a hole in a wall to take a inner wall sample. Drill bit not included.

    By EMLab P&K based in South San Francisco, CALIFORNIA (USA). from Hand Drill Product line

  • 1/4` Drill Bit

    1/4' Drill Bit for Hand Drill in WallChek II Kit.

    By EMLab P&K based in South San Francisco, CALIFORNIA (USA). from 1/4` Drill Bit Product line

  • Kymera - Model XTreme - Hybrid Drill Bit

    The Kymera XTreme (XT) hybrid drill bit combines advanced engineering, customized application guidelines and the industry’s most advanced hybrid bit designs to deliver better drilling runs through carbonates and interbedded formations than were ever possible before. The bit’s roller cones and blades are engineered not only to perform ...

    By Baker Hughes, a GE company based in Houston, TEXAS (USA).

  • DTH Hammers

    Sandvik DTH hammers and drill bits are designed together to work in perfect unison, giving high penetration rates, long service life and low costs. The RH550-series hammers and bits features solutions, which optimizes impact-energy transmission into the rock. With no foot valve, a reversible casing and very few parts, they are reliable, easy to ...

    By Sandvik Mining and Construction B.V based in Amsterdam, NETHERLANDS. from DTH Hammers Product line

  • Reverse Circulation Down Hole Drilling Hammer Bits

    Holte Reverse Circulation Drilling Hammer Bits Offer Control. As the most experienced reverse circulation manufacturer in the industry we understand bits and the importance of having a durable, effective design leading your tooling down the hole.  Our complete line of reverse circulation bits are designed with that in mind.

    By Holte Manufacturing based in Veneta, OREGON (USA). from Reverse Circulation Down Hole Drilling Hammer Bits Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you