Only show results in Massachusetts? Ok

Drill Cuttings services for Soil and Groundwater

  • Oil and Gas Drilling Waste Management Equipment and Services

    SCS equipment and services for drilling waste management are offered on a contract or rental basis for oil and gas drilling projects.

    By Solids Control Services based in Altens, UNITED KINGDOM.

  • Firmus Process

    Our Firmus process is considered a viable recycling option under the EPA and API waste hierarchy. Based on accepted solidification and stabilization technology, this service includes the engineering for waste disposition and pit closure, the work to recycle the waste, and the confirmatory testing of the recycled material after placement.

    By Scott Environmental Services, Inc. (SESI) based in Longview, TEXAS (USA).

  • Transportation Services

    Count on R360’s transportation services for the collection and removal of all of your drill cuttings and site waste. When pits aren’t possible and oil-based mud cuttings make an appearance, R360 offers the on-site transportation services you need to haul all of your drilling wastes.

    By R360 Environmental Solutions based in Houston, TEXAS (USA). from Site Services Service line

  • Services

    REMOR offers the following services:covering with galvanic coatings,powder painting,pressure and chill casting,CNC lathing processing centre,automatic cutting,pipe bending,Execution of casting forms and instruments:

    By Remor S.A. based in Recz, POLAND.

  • Drilling Mud Recycling Services

    Water based and oil based drilling mud as well as waste cuttings from the solids control equipment can be broken down and processed on site or off site. The mud is broken down to release the water which is recovered and pH adjusted for disposal or reuse as make up water. The residual solids are then squeezed to remove as much water as possible ...

    By SPINPRO based in Bellingham, WASHINGTON (USA). from Dewatering Services Service line

  • DuraTherm - Desorption Services

    Leader in indirect fired thermal desorption The DuraTherm Desorption process is the front runner in indirect fired thermal desorption, successfully treating hundreds of thousands of tons of widely varying waste streams to US EPA-defined Universal Treatment Standards (UTS). Our technology has been granted a unique US EPA federal delisting for most ...

    By DuraTherm, Inc. based in Houston, TEXAS (USA).

  • Solid Drilling Waste

    Solid drilling waste is comprised of drilling mud and cuttings that cannot be pumped.  Typically, it is solid cuttings with drilling mud, which contains solids, liquids and other additives, attached.

    By Scott Environmental Services, Inc. (SESI) based in Longview, TEXAS (USA).

  • Remediation/Injection Services

    Atlas Geo-Sampling has completed over 100 projects that involve the installation of remediation / injection wells or the direct injection(thru the DPT rods) of various remediation substances

    By Atlas Geo-Sampling Company based in Alpharetta, GEORGIA (US) (USA).

  • Waste Management

    Epic provides on-site drilling, fluid and cuttings sampling and analysis. Epic technicians are equipped and trained for accurate sampling and analysis as per government requirements. The addition of hydrocarbon test kits provides companies with accurate and prompt analysis so disposal options can be assessed in a more timely fashion.

    By Epic Environmental Technologies Inc. based in Redvers, SASKATCHEWAN (CANADA).

  • Vibratory Drilling Services

    MicroWells are a fast, efficient, cost-effective alternative to conventional drilling for your site investigations. You save money and time because the diameter of the well is small and the purge volume is removed rapidly and inexpensively. Installations are performed without drilling fluids and generate no soil cuttings. You benefit from ...

    By Pine & Swallow Environmental based in Groton, MASSACHUSETTS (USA).

  • Oilfield Division Services

    Newalta's Oilfield Division provides services to oil and gas exploration and production companies in Western Canada and the U.S. It also includes a Drilling Services group that manages drill site and environmental services. The solutions we provide - both through our facilities and on customer sites - help customers reduce waste volumes; recover ...

    By Newalta Corporation based in Calgary, ALBERTA (CANADA).

  • Core Drilling/Saw Cutting Concrete Services

    Ground Penetrating Radar (GPR) is a very safe and cost effective method to locate and mark rebar, post-tension cables, conduits and other elements located within concrete slabs prior to renovation work. GPR is safe to use in close proximity to people. 3D imaging of structural steel can be produced quickly and images are easily included into ...

    By Earth Measurement Corp. based in Cypress, TEXAS (USA).

  • Drilling & Cutting

    Concrete cutting, diamond cutting, concrete drilling or diamond drilling – we can carry out any type of drilling or cutting task.

    By MT Højgaard based in Søborg, DENMARK. from Civil Works Service line

  • Rotary Core Drilling

    The rotary drilling technique is normally used for forming a deep observation borehole or for obtaining representative samples of rock which could not be recovered using conventional light cable percussion drilling methods. Powered rotary cutting tools use a cutter head on the end of a shaft, which is driven into the ground as it rotates. The ...

    By A F Howland Associates based in Norwich, UNITED KINGDOM. from Site Investigation Service line

  • Rotary Drilling

    Rotary Drilling is the backbone technique of intrusive SI work, the extractive minerals industry and civil engineering.

    By Ecologia based in Sittingbourne, UNITED KINGDOM. from Drilling Services Service line

  • Fabrication Work

    W. B. Young Company, Inc. provides fabrication for machine shops, exercise equipment companies, asphalt plant manufacturers, automobile after-market equipment companies, and fabrication of dust collectors and pollution control equipment for several domestic and international corporations.

    By W. B. Young Company, Inc. based in Marshall, MISSOURI (USA).

  • Concrete & Bituminous Drilling

    We are equipped to carry out core cutting on bituminous materials, and lean mix, pavement quality and structural concrete. We have the capability to accurately identify the position of reinforcing within concrete structures in order to avoid it during core cutting, if possible.

    By ACS Environmental Testing Ltd. based in Poole, UNITED KINGDOM.

  • Fabrication and Value Added Services

    Our state-of-the-art, technologically advanced facilities allow us to stand above the rest and offer an assortment of valuable added services to our customers.

    By Uniflyte Inc. based in Orion, ILLINOIS (USA).

  • Air Rotary Drilling Services

    Drilling borings with air is a rotary method using compressed air as the circulation medium. The drill bit grinds away the formation and the air removes the drill cuttings from the boring. There are many types of air rotary drilling, reverse air drilling and direct air drilling being the most common with many variations of each. The direct air ...

    By Talon/LPE based in Amarillo, TEXAS (USA). from Environmental Drilling Services Service line

  • Mud Rotary Drilling Services

    Drilling borings with “mud” is a rotary method using pumped water and/or additives as the circulation medium. The drill bit grinds away the formation and the mud removes the drill cuttings from the boring. The cuttings are separated at the surface from the mud and the mud is recirculated back down into the boring. There are many types ...

    By Talon/LPE based in Amarillo, TEXAS (USA). from Environmental Drilling Services Service line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you