Only show results in Virginia? Ok

Groundwater Modeling services for Soil and Groundwater

  • Premium

    Industrial Permitting and Planning Services

    CERC carries out a huge variety of air quality assessments for permit applications, planning applications or risk assessments, for sites in the UK and overseas. CERC's industrial clients have included Anglian Water, BP, British Sugar, The Carbon Trust, EDF Energy, Johnson Matthey, Mitsubishi Industries, Rolls-Royce, RWE NPower, Savills and ...

  • Premium

    Planning and Development Control Services

    CERC carries out air quality assessments to support planning applications for infrastructure, residential and commercial projects. The model used depends on the source types under consideration; as the developers of ADMS, ADMS-Roads and ADMS-Urban, we have unrivalled expertise in the application of these models.

  • Premium

    Hazardous Releases Services

    The modelling of hazardous releases can be required for emergency situations, such as a liquid spill, catastrophic failure of a tank or rupture of a pipeline. Toxic or flammable substances, such as ammonia, chlorine and Liquid Natural Gas (LNG), are often considered.

    By Cambridge Environmental Research Consultants (CERC) based in Cambridge, UNITED KINGDOM. from Hazardous Releases Services Service line

  • Premium

    Model Evaluation Services

    CERC’s consultants are highly experienced in evaluating the performance of environmental models, at a range of spatial and temporal scales, against measured data. We have expertise in using a range of graphical and statistical methods to determine model performance for both long-term assessments and short-term forecasts.

    By Cambridge Environmental Research Consultants (CERC) based in Cambridge, UNITED KINGDOM. from Model Evaluation Services Service line

  • Premium

    Stream Gauging Services

    GOES offers stream gauging services including site selection, data collection, calibration and rating curve development, discharge measurements. Results are used for stream gauging, velocity mapping, hydraulic modeling environmental compliance and flow studies. We have performed hundreds of Acoustic Doppler current profiles (ADCP) measurements.

    By General Oceanics Inc. based in Miami, FLORIDA (USA).

  • Premium

    Carbon Capture and Storage Modelling Services

    CERC was involved in the ‘CO2 capture Mongstad’ project, a major venture overseen by Statoil Petroleum AS and Gassnova SF (the Norwegian State enterprise for carbon capture and storage). CERC took part in a project to improve the understanding and quantification of the dispersion of degradation products of amines in the atmosphere. ...

  • Premium

    Source Apportionment Support Services

    Cooper Environmental researchers have made major contributions to the development and application of source apportionment modelling and pioneered the use of receptor modeling methods in support of control strategies from federal to state implementation plans.  We offer a complete set of services for receptor modelling studies including ...

    By Cooper Environmental Services based in Beaverton, OREGON (USA).

  • Premium

    Modeling Runs Services

    Lakes Environmental is now running projects for our clients using the powerful capabilities of a Cray Supercomputer. This service utilizes our AERMOD MPI parallel code to run AERMOD projects in a fraction of the time it would take on a standard desktop computer. We are also able to process projects using models other than AERMOD.

    By Lakes Environmental Software based in Waterloo, ONTARIO (CANADA).

  • Biotic Ligand Modelling Service

    The U.S. Environmental Protection Agency has published a draft update of the Ambient Water Quality Criteria for Copper (68 Fed. Reg. 75552, December 31, 2003). This document, which is available at, contains updated freshwater and saltwater aquatic life criteria for copper. In addition to ...

    By AquaTox Testing & Consulting Inc. based in Guelph, ONTARIO (CANADA).

  • Engineering and Design Services

    Technical experience: With more than 90 years' experience of design, engineering and project management, and some 1 500 plants sold all over the world, there is no doubt that COMESSA's strengths are its technical scope and its workforce. Controlled project management: As soon as an order is received, a production engineer is designated. This is ...

    By Comessa S.A. based in Strasbourg, FRANCE.

  • ArcGIS Online Map Services

    ArcGIS Online map services include basemaps, demographic, reference, and specialty maps. Use these map services to create web maps in ArcGIS Online that you can share or embed in a blog or website, or with Apps for Smartphones and Tablets applications. You can also access them directly from ArcGIS for Desktop and ArcGIS for Server. Developers can ...

    By Esri based in Redlands, CALIFORNIA (USA).

  • Hydraulic Network Modelling Services

    The integrated network analysis offers the possibility to obtain measuring data of a existing network under real operation conditions at well defined locations and times. However, by establishing of a network simulation model, the hydraulic network calculation allows to apply the gained knowledge to all points and times of the existing network as ...

    By SETEC Engineering GmbH & Co KG based in Klagenfurt, AUSTRIA.

  • Hydraulic Models

    Our managing director has specialist experience in the design, construction, and operation of physical hydraulic models.

    By Lymington Technical Services Ltd based in Southampton, UNITED KINGDOM.

  • Metalstitch Cold Cast Iron Repair Services

    In-Place Machining Company’s Metalstitch® Cold Cast Iron Repair process is the proven method for repairing cracked, damaged, and broken cast iron. We use advanced engineering methods such as 3D modeling and finite element analysis to determine the best repair geometry, and we select the right materials using our proprietary forged keys ...

    By In-Place Machining Company based in Milwaukee, WISCONSIN (USA).

  • Computational Fluid Dynamics (C.F.D.) Services

    Understanding the fluid dynamics and thermo-control is essential to the properly design products for which these phenomena play a roll of importance. The term C.F.D. covers calculations in the field of fluid dynamics, which are based on numerical methods. Often so-called finite element method is adopted. This means that volume, where the studied ...

    By Delta Controls BV / Veenstra Group based in Emmen, NETHERLANDS.

  • Online Educational Services

    IDModeling’s educational services, including training and webcast seminars, enhance and empower our customers to perform tasks and projects in-house. We deliver Online Hydraulic Model Training and Industry Expert Webcasts as standalone or subscription offerings, customized by need.

    By IDModeling, Inc. based in Arcadia, CALIFORNIA (USA).

  • Light Detection and Ranging (LiDAR)

    LiDAR (Light Detection And Ranging) is widely accepted as a valuable tool for the collection of data in the form of point clouds, which can be translated into highly accurate deliverables ranging from contour maps and digital terrain models to solid objects and detailed 3D models. LiDAR data can be collected from various platforms ranging from ...

    By UIT Underground Imaging Technologies based in Latham, NEW YORK (USA).

  • Modernization & Data Management Services

    Let RockWare convert your old paper logs and maps into modern maps, sections, data and volume reports.  RockWare uses tools such as RockWorks, LogPlot, ArcGIS and Google Earth to extract valuable information from old maps, logs and tables.

    By RockWare, Inc. based in Golden, COLORADO (USA).

  • Process Modelling and Consultancy Services

    The Thermal Technologies Centre offers extensive process modelling and consultancy services, and via its collaboration partner Tata Steel this overall consultancy service extends to areas such as physical (fluid flow) and computational (CFD) process modelling. We also encompass bespoke measurement, metallurgical evaluation and finite element ...

    By Centre for Process Innovation (CPI) based in Redcar, UNITED KINGDOM. from Process Modelling and Consultancy Services Service line

  • Services

    In addition to the fabrication and manufacture of high quality heavy equipment for key industries, Tenbusch Inc. offers the following additional services: Reconditioning and refurbishment of used heavy equipment. Support and training for manufactured heavy equipment. Design and problem solving services centered around over 40 years experience with ...

    By Tenbusch Inc. based in Lewisville, TEXAS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you