Only show results in Virginia? Ok

Sediment Monitoring Applications

  • Premium

    Channel networks solutions for hybrid flow measurement in main collector sector

    Hood profile 2200 x 1980. Part filled and full. Precast concrete parts. Sedimentation and temporary overflow.

    By NIVUS GmbH based in Eppingen, GERMANY.

  • Premium

    Flow measurement in large WWTP intake area for wastewater treatment plant

    Application: Structured U profie made of concrete, 2.5 x 2.5 m (w x h) with dry weather channel. Partially filled. Very high discharge dynamics. Risk of sedimentation during nighttime.

    By NIVUS GmbH based in Eppingen, GERMANY.

  • Premium

    Irrigation & drainage systems solutions for Sludge Level Measurement Groundwater Treatment

    Application: Multi-stage container plant. Chamber size 2.4 x 2.9 x 12.2 m (w x h x d). Aerated, limed groundwater with approx. 80 mg/l iron ochre contents. Built-in lamella filters.

    By NIVUS GmbH based in Eppingen, GERMANY.

  • Premium

    Flow and analysis measurement for food industry

    Application: Pipe with 0.3 m diameter. Part filled. Pipe made of HDPE. Shift production. Heavy flow fluctuation. Low sedimentation.

    By NIVUS GmbH based in Eppingen, GERMANY.

  • Premium

    Flow measurement on flood polder for flowing waters

    Application: Concrete duct 6 x 3.5 m (w x h). Partially filled. 3 parallel ducts. Very high flow dynamics featuring flow rates up to 82 000 l/s.

    By NIVUS GmbH based in Eppingen, GERMANY.

  • Premium

    Hydrological, meteorological and oceanographic monitoring instruments for water resource management

    Water resource management refers to the conservation, custody and transport monitoring of water as a natural resource. Measurements are made to quantify water for the purpose of protection, forecasting, management, lawmaking, enforcement, policymaking, resource allocation and public reporting. Stevens has been providing quality products for water management for over 100 years.

    By Stevens Water Monitoring Systems, Inc. based in Portland, OREGON (USA).

  • Determination of water-soluble forms of inorganic and organic anions in soils, clays, peat, wastewater silt, activated sludge, and bottom sediments

    The method allows determination of water-soluble forms of inorganic (chlorides, sulfates, nitrates, fluorides and phosphates) and organics (acetates, formates, and oxalates) anions in soils, clays, peats, wastewater silts, activated sludges and bottom sediments by capillary electrophoresis method.

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Continuous Instream Monitoring

    Turbidity in natural waters is recognized as an important indicator of its environmental health, and because it's a good surrogate for suspended sediment, monitoring turbidity has always been the "holy grail" for hydrologists. But because of earlier technology, "turbidity" has traditionally been a "bad word". The DTS-12 turbidity sensor is the first sensor to make turbidity monitoring practical, and no longer difficult, inaccurate, expensive, or labor-intensive. Turbidity is the cloudiness or murkiness of water...

    By FTS based in Victoria, BRITISH COLUMBIA (CANADA).

  • Posi-Shell Coatings

    Posi-Shell erosion control coatings are the perfect low-cost solution to protect and stabilize slopes. Our long-term coatings are spray-applied and allow engineers or operators to protect acres (hectares) of slope in a single day. The finished coating is durable and textured, reducing water energy across large areas. The final product eliminates erosion, siltation, and (as a result) expensive rework. The product can be designed to last for years and is easily tracked into slopes when intermediate protection...

    By LSC Environmental Products, LLC based in Apalachin, NEW YORK (USA).

  • Construction Xray Inspection

    A non destructive test for concrete plays a central role in determining the quality of cement casting. Bubbles and sediment in the cement weaken the construction considerably. NDT testing equipment is also used in construction to determine the quality of the wired foundations. One of the challenges of construction NDT is the possible difficulty in reaching testing locations. A non destructive test for concrete conducted with a portable digital radiography system provides an excellent inspection tool. Combining...

    By Geomorph Instruments based in Nicosia, CYPRUS.

  • WEDA Underwater cleaning robots in lagoons and large fountains

    The new Weda YT-5000 with a five (5) meter wide suction nozzler speeds up the cleaning process considerably. Estimated cleaning speed is up to 3000 sq. meters/hour. The cleaner removes efficiently bottom sedimentation (sand, algae etc.) from the bottom surface and pumps it to a selected discharge point (filter, waste etc).

    By Weda AB based in Södertälje, SWEDEN.

  • Remote monitoring stations

    The Water Survey of Canada, a division of Environment Canada, is a federal government agency responsible for collection, interpretation and dissemination of water source data and information. As a division of Environment Canada, the Water Survey of Canada (WSC) covers a vast range of topographical environs from Arctic Canada to the US border with elevations varying from sea level to over 13,000 feet (4,000 metres). An estimated 7% of the world’s renewable water supplies are found in Canada. Canada’s hydrology is...

    By FTS based in Victoria, BRITISH COLUMBIA (CANADA).

  • Sediment Spill Sedimentation Monitoring

    Our SediMeter™ instruments are designed with sediment pollution monitoring in mind. They form part of a system with network and software components designed specifically for monitoring sediment spill sedimentation in sensitive biotopes. After all, sediment is natural in the environment, and it is only when it is in the wrong place at the wrong time that it becomes a pollutant. By measuring this in situ, and in real time, we enable companies to avoid causing environmental damage in the most cost-effective way...

    By Lindorm, Inc. based in Medley, FLORIDA (USA).

  • PAHs in Sediment

    Sitelab's laboratory performed a 4 day site investigation testing PAHs in sediment on the West Branch Grand Calumet River in Indiana. Test data was used to fingerprint and map the river bottom contaminated with heavy crude oil.

    By Sitelab Corporation based in West Newbury, MASSACHUSETTS (USA).

  • Determination of mercury in soil, bottom sediments, and geological materials

    INTRODUCTION Analysis of soils and bottom sediments for mercury content is one of the most common analyses in the monitoring of environmental pollution. Background mercury concentrations in these objects are 10–100 μg/kg and in the polluted areas they exceed 10,000 μg/kg.

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Water Data Management Solution for Alpine Monitoring

    KISTERS has developed a specific version of WISKI with unique benefits for those monitoring Alpine Regions. Some of its advanced features include specialized calculations for measuring precipitation, snow, sediment transport and water balances in catchments.

    By KISTERS AG based in Aachen, GERMANY.

  • Environmental dewatering solutions for environmental dredging

    TenCate Geotube technology helps to dewater and contain contaminated sediments in rivers, bays, harbors, marinas, ports, dock facilities, hydro basins and other waterways. In many cases, these sediments pose significant environmental hazards, and remediation is a difficult and expensive task.

    By TenCate Geosynthetics Netherlands bv based in AE in Nijverdal, NETHERLANDS.

  • Industry

    Dragflow is a world leader in slurry pumping solutions. Dragflow pumps can handle all slurry from dirty water to the very heavy slurries with solid concentration up to 70% by weigh. Thanks to its twenty five and more years of experience in the most difficult pumping application Dragflow is able to satisfy the most demanding customer in the industrial and construction market.

    By Dragflow S.r.l. based in Villafranca, ITALY.

  • Water monitoring technology for coastal & estuary

    Measurement of water quality in coastal regions and estuaries is critical in the characterization of hypoxic ‘dead zones’ as a result of nutrient loading and algal blooms in the water bodies. Sediment loading analysis through turbidity measurement is also important for coastal trend identification and modeling. Hydrolab and Sea-bird Coastal offer a variety of multiparameter water quality instrumentation and nutrient sensors for long-term coastal applications.

    By OTT HydroMet based in Kempten, GERMANY.

  • Water treatment solutions for the truck and tire wash

    New technology developed at Dungeness specifically for maintaining continuously clean wash water. Superior performance for washes at landfills, construction sites, military bases, sand & gravel mines and more.

    By Dungeness Environmental Solutions, Inc. (DESI) based in Everett, WASHINGTON (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you