Only show results available in Virginia? Ok

Trenchless Pipe Systems equipment for Soil and Groundwater

  • HD 30 (1.18″ Bow)

    The New HD Series Pipe Spacer / Centralizer from kwikZIP is ideally suited for Trenchless and Pipeline applications. The introduction of the HD Series range means that kwikZIP Centralizers and Spacers are now available for pipe diameters from 0.70″ upwards. made from heavy duty engineering thermoplastics and rated to 80 deg C / 176 deg F ...

    By kwik-ZIP Centralizers based in Bunbury, AUSTRALIA.

  • Hydros Boy - Connection Pipelines

    This technology is used for the trenchless, same-channel replacement and new installation of steel, grey cast iron or ductile cast iron gas and water connection pipelines. All available diameters can be replaced using grab jaws. The maximum exterior diameter should be 110 mm, and as a rule the maximum length of one section should be no longer than ...

    By KARL WEISS Technologies GmbH based in Berlin, GERMANY. from Connection Pipelines Product line

  • Spartan UnderTaker - Trenchless Pipe Repair and Replacement System

    This trenchless pipe repair and replacement system allows 2'-6' pipe replacement with up to three 45-degree bends in the pipe and can even upsize from 4' to 6' pipes.

    By Spartan Tool L.L.C. based in Mendota, ILLINOIS (USA). from Trenchless Pipe Repair and Replacement System Product line

  • BKP - Model GRP - Glass-fiber Reinforced Plastic

    Pipe insulation made from glass-fiber reinforced plastic (GRP), the highest mechanical wear resistance for trenchless pipe jacking. Glass-fiber reinforced plastic is an extremely durable material that we use as a protective coating for optimal work in the area of trenchless pipe jacking. In contrast to conventional PE/PP pipe insulation, this is a ...

    By BKP Berolina Polyester GmbH & Co. KG based in Velten, GERMANY.

  • Model GO 6000C - Trenchless Pipe Replacement System

    Each chain operated Trenchless Pipe Replacement System, Model GO 6000C, includes all accessories to complete a 4” and 6” diameter pipe bursting and pipe replacement pull. The complete set-up includes the following five major components; (1) Model 6000 Power Supply ...

    By Gorlitz Sewer & Drain, Inc based in Santa Fe Springs, CALIFORNIA (USA). from Trenchless Pipe Replacement System Product line

  • Slip Lining

    Slip lining is one of the original methods of trenchless rehabilitation for existing pipelines. In fact, it's been used since the early 1940's. Like its other trenchless rehab counterparts, slip lining will repair leaks and can restore structural stability to an existing pipeline. Slip lining is completed by installing a smaller, 'carrier pipe' ...

    By Inland Pipe Rehabilitation (IPR) based in Conyers, GEORGIA (US) (USA).

  • Cretex - Model HydraTite - Internal Joint Seal

    The HydraTite Internal Joint Seal is a mechanical, trenchless remediation for repair of pipe joints. The HydraTite system consists of a proprietary rubber seal which spans the joint and is held in place by stainless steel retaining bands on either side of the joint. These retaining bands are hydraulically expanded and locked in place using a wedge ...

    By Cretex Specialty Products based in Waukesha, WISCONSIN (USA).

  • Shooter - Model 12 - Trenchless Pipe Repair Machine

    Cost effective and long lasting, trenchless sewer line repair. Fits 6”, 8”, 10” and 12” liners. Gate valve prevents deflation as tail passes through. Separate steam cap included. On-board atomizing lubrication system. Portable hand truck design. Operates in vertical and 45 degree positions. On-board tool storage bin. ...

    By Emagineered Solutions, Inc. based in Redmond, OREGON (USA). from Trenchless Pipe Repair Machine Product line

  • SaniTube - Our high performance stand-alone "pull in"liner.

    SaniTube® is for trenchless rehabilitation of fresh water pipelines of all common types of pipes (including cast-iron, ductile iron, steel, PVC and asbestos-cement pipes) from DN25 to DN400. Available with polyethylene (PE) and polyurethane (PU) coatings.

    By Amex Sanivar based in Nöbdenitz, GERMANY.

  • MAX - Model T240 - Piercing Tool

    MAX T240 is a machine designed for inserting steel pipes to the diameter up to ø600 mm. The innovative construction ensures a very high impact power, 40-60% higher than in other machines of this type of similar weight and sizes.

    By Terma Sp. z o.o. based in Gdansk, POLAND. from Piercing Tool Product line

  • CATAMOUNT - Piercing Tools

    The revolutionary Catamount line of piercing tools from HammerHead® offers the industry a reciprocating head tool that is easy to start, regardless of air pressure level, and is the first pneumatic piercing tool head effective in both hard and soft soil conditions. The new Catamount tool line is currently available in 2.5' (64 mm), 3' (76 mm) ...

    By HammerHead Trenchless Equipment based in Lake Mills, WISCONSIN (USA).

  • Model GO 6000R - Trenchless Pipe Replacement System

    Each wire rope operated Trenchless Pipe Replacement System, Model GO 6000R, includes all accessories to complete a 4” and 6” diameter pipe bursting and pipe replacement pull. The complete set-up includes the following five major components; (1) Model 6000 Power Supply Cart, (1) Model 6100R Puller Unit, (1) Model 6200 Clamp Fixture, (1) ...

    By Gorlitz Sewer & Drain, Inc based in Santa Fe Springs, CALIFORNIA (USA). from Trenchless Pipe Replacement System Product line

  • Slip Lining

    Slip lining is one of the original methods of trenchless rehabilitation for existing pipelines. In fact, it's been used since the early 1940's. Like its other trenchless rehab counterparts, slip lining will repair leaks and can restore structural stability to an existing pipeline. Slip lining is completed by installing a smaller, 'carrier pipe' ...

    By IPR based in Houston, TEXAS (USA).

  • SaniLine - Our inversion installation process for trenchless rehabilitation of pressurized water, gas, petrol, oil and heating mains.

    SaniLine® is ideally suited for the rehabilitation of all common types of pipes, including cast-iron, ductile iron, steel, PVCas well as asbestos-cement pipes, and media with diameters ranging from DN 80 to DN 800.

    By Amex Sanivar based in Nöbdenitz, GERMANY.

  • The Shooter - Model 24 - Trenchless Pipe Repair Machine

    Cost effective and long lasting, trenchless sewer line repair. Fits 15”, 18”, 21” and 24” liners. Gate valve prevents deflation as tail passes through. Trailer mounted for mobility. Operates in vertical and 45 degree positions. Truly continuous air-inversion. Fast inversion times. Extremely durable construction. Made in the ...

    By Emagineered Solutions, Inc. based in Redmond, OREGON (USA). from Trenchless Pipe Repair Machine Product line

  • VAC-A-TEE - Trenchless Cleanout System

    VAC-A-TEE is a trenchless cleanout installation system that is environmentally friendly, utility friendly, and installer friendly. Installed by means of hydro or vacuum excavation, the VAC-A-TEE system is a clean and safe method for installing a new cleanout, which provides access to the sewer lateral pipe for cleaning, lining, root removal, CCTV, ...

    By LMK Technologies, Inc. based in Ottawa, ILLINOIS (USA). from Trenchless Cleanout System Product line

  • Model MAX - Accessories

    Accessories for pulling and driving pipes: sleeves for inserting PE / PCV, cones for inserting steel pipes, accessories for removing sand from steel pipes, extensions and expanders, optical set, starting platform, pneumatic hoses and connectors.

    By Terma Sp. z o.o. based in Gdansk, POLAND. from Accessories Product line

  • Model ST-40 - Pipeline Replacement Machine

    This is a mini-unit, with the pulling capacity of 40 tons, applying the trenchless technology for replacement of average-diameter pipelines.

    By Mempex Ltd based in Minsk, BELARUS.

  • HOBAS - Jacking Pipes

    HOBAS Jacking Pipes with flush couplings (GRP or stainless steel) are used for trenchless installations of different applications. Nominal Diameter [DN]  250 - 3600 mm, Nominal Pressure [PN] 1 bar Nominal Stiffness [SN] 32000 - 1000000 N/m²

    By HOBAS Engineering GmbH based in Klagenfurt, AUSTRIA. from Jacking Pipes Product line

  • Gas Sealer Seal

    Link-Pipe Inc. has available Gas Sealer Sleeves to seal cast iron and low pressure mains. Gas Sealer Sleeve was jointly developed by Link-Pipe Inc. with Consolidated Edison, KeySpan Energy (prev. Brooklyn Union/Lilco) and NYGAS.

    By Link-Pipe Inc. based in Richmond Hill, ONTARIO (CANADA). from Gas Sealer Seal Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you