Only show results in Massachusetts? Ok

Well Casing equipment for Soil and Groundwater

  • Premium

    AMS - Manual Port-A-Reels Pump

    The rugged powder-coated frame has large 16' pneumatic tires with extendable swivel castors on the front and is fitted with a footage counter. The boom is extendable to accommodate different well casing heights. The standard model has a hand crank and reel brake. The hydraulic model includes a 1 hp 110 volt electric driven hydraulic pump motor ...

    By Art’s Manufacturing and Supply, Inc. (AMS Inc.) based in American Falls, IDAHO (USA). from Manual Port-A-Reels Pump Product line

  • Salient Pole Rotors

    Hydrogenerators and other salient pole machines consist of a rotating spider mounted on a shaft with field poles mounted on the spider rim. We have manufactured new field poles for more than a dozen units whose frequency was increased from 25 cycles to 60 cycles, as well as cases where pole laminations were damaged in some way. We have also ...

    By National Electric Coil (NEC) based in Columbus, OHIO (USA).

  • Model BP - Well Seal

    Available for 4”, 5”, 6”, 8”, 10”, 12”, and 14” well casing. Two (2) side opening for wires or additional pipe. O-Ring sealed in the ID of WELL SEAL and drop pipe. 4”, 5” and 6” are constructed from lightweight high strength aluminum alloy. 8”, 10”, 12” and 14” are ...

    By Western Rubber & Manufacturing based in Conroe, TEXAS (USA).

  • Geoproduct - Diamond Casing Shoes

    Diamond casing shoes are used in the well casing with a casing tubes. Due to the combination of a matrix of synthetic diamond and carbide undercut plates - casing shoe ensure long service life, high speed and maintain operating diameters. Depending on the needs of our customers we can produce shoes with reinforced casing type matrix and different ...

    By Geoproduct Inc. based in Asenovgrad, BULGARIA.

  • Casing Head Spools

    Casing Head Spool: The adapter (usually flanged) above the Casing Head and either the BOP stack (during drilling) or the next wellhead stage (after completion),  and allowing suspension and sealing of another casing string.   

    By Itag Celle based in Celle, GERMANY. from Casing Head Spools Product line

  • Model BG - Shale Trap Formation Packer

    Available for most standard environmental well Casing. Manufactured from a SILICON material. Contains NO hydrocarbons or other toxic materials. Designed for grouting between well casing and bore hole. For identification – Colored BROWN. Provided with STAINLESS STEEL CLAMP

    By Western Rubber & Manufacturing based in Conroe, TEXAS (USA).

  • Nautiloop - Shopping Bag to Roll-Up

    Bags are useful wherever you go: At the supermarket, while shopping, travelling... you just have to remember to take one with you! The solution: nautiloop - the roll-up shopping bag. The large bag can be folded up and stored away in the smart case, is always ready-to-use and well protected.

    By Designteam Neth Schäflein (DNS) based in Berlin, GERMANY.

  • Model RIG 23 - Casing Head Housings Adapter

    Casing Head Housing: The adapter (usually flanged) between the first casi the BOP stack (during drilling) or the next wellhead stage (after completion), suspension and sealing of the secondary casing string    ng string and either and allowing.

    By Itag Celle based in Celle, GERMANY. from Casing Head Housings Adapter Product line

  • Di-Tube - Water Soluble Packaging System

    Di-Tube is an ideal packaging system for delivering surfactants, foaming agents, bacterial additives, colorants and other agents for quick dispersion into water. Made of water-soluble materials the Di-Tube is designed to carry the enclosed contents into the water source where it will dissolve and release them. Di-Tube will dissolve in concentrated ...

    By Randolph Austin Company based in Manchaca, TEXAS (USA). from Water Soluble Packaging System Product line

  • Corrugated Well Casing

    These attributes make for easy work on any depth of well. GP Fiberglass has been building corrugated well casing for over 20 years. A unique manufacturing method allows us to save time and waste, giving you a consistent and reasonably priced well casing.

    By G.P. Fiberglass Ltd. based in Melfort, SASKATCHEWAN (CANADA). from Corrugated Well Casing Product line

  • Model 50L - Windmill Pump

    ELIMINATES FALSE WELL PIT - The pump fits inside a 3-inch or larger well casing thus eliminating the undesirable, unsanitary false well pit.

    By Hitzer, Inc. based in Berne, INDIANA (USA). from Windmill Pump Product line

  • POWERPACK - Model PP1 - Manual & Automated Pump Actuators

    This actuator is an excellent choice for those with moderate pumping requirements.The Waterra PowerPack PP1 provides the mechanical actuation for pumping with inertial pumps to depths of over 60m, in a fully portable, single operator power unit. At 13 kg, the PowerPack PP1 provides outstanding pumping performance.

    By Waterra USA Inc. based in Peshatin, WASHINGTON (USA). from Manual & Automated Pump Actuators Product line

  • Bennett - Submersible Piston Pump

    Bennett Sample Pumps have automatic reciprocating piston motors, operated by compressed air, that generate power for operating a double acting, piston fluid pump. Models for lifts up to 500 feet have one motor piston; Models for lifts up to 1000 feet have two motor pistons, providing increased power for operating the pump. All models have a ...

    By Bennett Sample Pumps Inc based in Amarillo, TEXAS (USA). from Submersible Piston Pump Product line

  • Pitless Adapter

    A pitless unit replaces above-ground well housing and well pits, improving sanitation, convenience, frost protection, and vandalism security. Welded to the well casing underground, the pitless unit safely redirects water below the frost line. It can provide well completions that occupy little room in highly populated areas and, with a submersible ...

    By Baski, Inc. based in Englewood, COLORADO (USA). from Pitless Adapter Product line

  • Casing Joints

    Whether you need casing to prevent contamination of well zones, prevent unstable upper formations from caving in on your bore hole, a strong upper foundation to continue drilling deeper or a smooth internal bore for installing production equipment, Western Drilling Tools can supply casing drilling equipment for any of your drilling needs. We ...

    By Western Drilling Tools Inc. based in Calgary, ALBERTA (CANADA). from Casing Joints Product line

  • Wells Cargo - Model MW6 - Mini Wagon Cargo Trailers

    The Mini Wagon is the perfect companion for weekend road trips or daily small business hauling needs. It's just 4' wide and 6' long, but don't let the small size fool you. It has all the same tough construction you'll find in our bigger commercial grade trailers. Designed to fit comfortably behind today's popular Minivans and SUV's, the Mini ...

    By Wells Cargo based in Bristol, INDIANA (USA). from Mini Wagon Cargo Trailers Product line

  • Promix Batch - Process Mixer

    In the case of frequent product and formulation changes as well as variable processes, batch mixers or discontinuous mixers are used. They are suitable e.g. for gentle homogenization and in general for the pre-processing of solid mixtures, solid-liquid, and paste-like mixtures. They are also used for sterilization, breaking up agglomerates, ...

    By Segler-Förderanlagen Maschinenfabrik GmbH based in Berge, GERMANY. from Process Mixer Product line

  • UniBridge - Model UBC series - Bridge Scales

    'Lifetime Warranty' on the scale under-structure for 'UBC' series and a twenty year warranty on the under-structure of 'H' series. 50K and/or 100K load cells have a 5-year warranty. Entire scale painted (not just the top and sides) with catalyzed epoxy paint. Intrinsic lightning and voltage surge protection. Summing boards with gaseous diodes for ...

    By Sanstrom Scale Construction Inc. (SSCI) based in Twin Falls, IDAHO (USA). from Bridge Scales Product line

  • Duzgunler - Screen Pipes

    Duzgunler Plastic produces a high quality range of PVC-U well casings and screens strictly in accordance with the Standard TS 11794 and ISO standarts, class I, II and III. The standard TS 11794 and ISO applies as well for raw materials and workmanship of pipes used in the manufacture of the casing and screen. There are three basic ranges - a ...

    By Duzgunler Plastic based in Konya, TURKEY.

  • Tenaris - Casing and Tubing

    At our state-of-the-art, fully-integrated manufacturing facilities, we produce steel pipe from 1 1/3' to 28' (outside diameters). Our casing and tubing pipes are manufactured according to API grades and also in proprietary grades including sour, high collapse, chrome and CRA products for special ...

    By Tenaris based in Luxembourg, FRANCE. from Casing and Tubing Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you