Only show results in Virginia? Ok

Biosolids Applications

  • Wastewater treatment solution for the municipal industries

    Visit any large wastewater treatment plant in the United States or Canada and chances are Schwing Bioset equipment, whether piston pumps or sliding frames, is handling the dewatered biosolids. As with our biosolids handling equipment, our selection of Class `A` processes afford Municipalities best-in-class options when it comes to reliability, safety, ease of operation, consistent results, and affordability.

    By Schwing Bioset, Inc. based in Somerset, WISCONSIN (USA).

  • Enhanced Biosolids and Bio Sludge Dewatering with Wilsa EWC

    IMPROVED BIOSOLIDS/ BIO SLUDGE DEWATERING WITH WILSA® CONDITIONING The WILSA ElectroWave™ effect can be used to condition polar fluids to alter their physical properties, improving several chemical and physical processes. - Reducing surface tension to improve the ability of water to repel solids - break physical / chemical emulsions - Increasing the contact angle of water - improve coalescing of solid particulate toaccelerate phase separation - Lowering the viscosity of water - reduce friction of flocculated solids dropping through less viscous water - Lower viscosity, reduced surface tension and increased contact angle of water - improve aeration of wastewater Installation of WILSA® ElectroWave Conditioner upstream of a belt press at a wastewater treatment plant resulted in polymer usage dropping by >50% while achieving much dryer solids.

    By Hudson Industries based in Warren, OHIO (USA).

  • Lime and Limestone solutions for water treatment industry

    The world’s surface is slightly over 70% water with billions of gallons of surface water and ground water used daily in society. Whether it is for drinking, hygiene, washing, cooking, recreation, agriculture, or power generation and industrial coolants, water is an undeniable source of life.

    By Carmeuse Lime based in Pittsburgh, PENNSYLVANIA (USA).

  • Municipal Biosolids Processing

    Vulcan® Systems and Mannco Wastewater & Soil Solutions are exclusive partners for the biosolids market in the US, Panama, and Cuba. The BIO-PRILL is a complete system designed to produce uniform Class "A" PFRP biosolid fertilizer prills from dewatered biosolids. The system is supplied complete with all components to turn biosolids into an environmentally sustainable and soil-enriching agricultural product as well as a potential revenue stream for municipalities. Dewatered biosolids are introduced through a wet material feed hopper and mixed with dry biosolids in batch mixers. A proper ratio of thoroughly mixed materials entering the dryer ensures the consistency required to efficiently reduce moisture and to optimize the formation of Class "A" PFRP dry biosolids. Mixed material is conveyed through the dryer where the heat removes excess moisture and reduces pathogens.

    By Vulcan Systems based in Moberly, MISSOURI (USA).

  • Filamentous Bulking Control with Hydrogen Peroxide

    Basis of Control with Hydrogen Peroxide Hydrogen peroxide may be used to correct a serious filamentous bulking situation or, preferably, to prevent one from occurring until adjustments can be made to remove the cause. When applied to the return activated sludge, hydrogen peroxide supplies dissolved oxygen which helps restore the microbial activity necessary for effective operation, while selectively oxidizing the filaments which retard settling. The effective dose of hydrogen peroxide is a function of time and concentration, and varies from plant to plant. To correct a serious bulking problem, immediate results may be obtained by adding 100 - 200 mg/L H2O2 to the biosolids recycle line. Once control of bulking is obtained, the dose may be reduced to 25 - 50 mg/L H2O2 to prevent re-occurrence. Practical Considerations Filamentous bulking of municipal activated sludge is not a normal occurrence, and suggests more fundamental problems may be at work (e.g., low dissolved oxygen, high sulfide input, heavy organic loading, nutrient imbalance, improper sludge age, or rapid changes in influent characteristics). Consequently, the use of chemicals such as hydrogen peroxide to control bulking should be pursued in concurrently with more fundamental corrective measures.

    By USP Technologies based in Atlanta, GEORGIA (US) (USA).

  • Gas infusion technology solutions for the water treatment industry

    Every municipality in the developed world has some form of water and wastewater treatment system. This varies from simple outfalls direct to the ocean to very sophisticated activated sludge plants with multiple unit processes dedicated to converting human waste, industrial effluents and storm runoff into clean water discharges and solids acceptable for some form of reuse. inVentures using its gas inFusion technology, has developed the gPRO system for the prevention and remediation of major algae blooms that negatively affect the water quality for millions of people. The company is currently working with several major water authorities on algae prevention programs by efficiently oxygenating specific regions of the water storage areas. Target Oxygenation prevents the build up of algal masses. Algal masses often require expensive treatment remedies and cause major taste and odor issues within drinking water supplies.

    By inVentures Technologies Incorporated. based in New Brunswick, NEW BRUNSWICK (CANADA).

  • Optimization of Wastewater Processing and Operations

    The biocatalytic composition Bio-Organic Catalyst (BOC) provides numerous benefits for all of the biological processes (aerobic and anaerobic) used to convert waste loadings into high quality discharges. The array of benefits made possible with BOC can be applied system-wide to bring critical solutions to the fundamental challenges of operators. Odors, improving dissolved oxygen levels, reduction of organic loadings and biosolids, bio-film build up, elimination of Fats, Oils & Grease (FOG), and improvements in discharge quality are all operating parameters that can be improved with use of BOC.

    By EcoJump LLC based in Santa Clara, CALIFORNIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you