Only show results available in Virginia? Ok

Hazardous Waste Regulations Applications

  • Premium

    Intelligent compliance solutions for retail industry

    Retailers are increasingly challenged with meeting EHS regulatory compliance obligations and an intense consumer demand for safer, more environmentally-friendly products. Nearly every aspect of a retailer`s business is impacted by EHS compliance, which requires knowledge and expertise that is far from a core skill set possessed by most of a retailer`s workforce. From sourcing products, to distribution and logistics, to employees handling regulated products, to the proper disposal of hazardous waste, a long list...

    By Verisk 3E based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Continuous Metals Stack Monitor (CEMs)

    Cooper Environmental`s Xact® 640 has the unique ability to generate high time resolution metals measurement in stacks. This unique capability has the potential to qualify as a substitution for the combination of a Hg/ PM CEMs application as well as the potential for a pollution control system feedback loop that could result in the reduction of pollution control consumables. Our systems have been site certified for compliance measurements at hazardous waste incinerator and secondary lead smelter sites.

    By Cooper Environmental Services based in Beaverton, OREGON (USA).

  • Premium

    Incinerator solutions for the pharmaceutical sector

    Pharmaceuticals are now shown to be found in surface, ground, and drinking waters around the world. This could create some potentially damaging environmental effects. Minuscule concentrations of chemicals known as endocrine disruptors, often found in pharmaceuticals, are having detrimental effects on aquatic animals and possibly on human health and development.

    By Inciner8 Limited based in Southport, UNITED KINGDOM.

  • Specialty Cleaners and Lubricants for Filter Membrane Industry

    International Products Corporation has been selling cleaners to the filter membrane industry for over 30 years. Our proprietary formulated cleaners work effectively at restoring 100% flux at safe pH ranges. We have a wide variety of chemistries available for all membranes and soils and an on-site R&D laboratory that offers technical support and assistance. All of our cleaners are free of solvents, phosphates, silicates, phenols, and Substances of Very High Concern.

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Cleaners for Food and beverage industry

    IPC offers a full line of precision cleaners that provide consistent results with every use and leave surfaces completely clean. An economical 1-2% concentration in water is effective in most cleaning applications. Typical uses include removing protein, starch, grease, fat, gum, oil and baked on soil from processing equipment, lines, and filter membranes.

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Assessing underground infrastructure for wastewater industry

    Nuclear and coal are still significant means of producing energy for electricity which is crucial for daily functionality. In order to generate power that meets everyday needs, pipeline infrastructure at these facilities need to be well maintained. Proactive inspections of these pipeline networks can improve pipeline integrity and safety for owners of power generation assets, as well as be a cost-effective means of maintaining them. The nation’s economy depends on electricity being available 24/7. EnTech...

    By EnTech Engineering Company based in Saint Louis, MISSOURI (USA).

  • Cleaners for Semiconductors/electronics industry

    Our cleaners are used in the manufacturing of semiconductors, flat panel displays, CDs, DVDs, and many other electronic items. They remove emulsions, particulates, oil, organic and inorganic contaminants from quartz, wafers, glass, silicon, ceramics, and metals. When rinsed properly our products leave no residue and your precision parts are ready for further processing.

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Water treatment research for refining and petrochemicals industry

    Refining processes like distillation use high quality steam that must be generated from ultrapure water. Advanced wastewater treatment technologies will help the industry meet tough regulations concerning hazardous waste products from process operations. As the industry expands into water-scarce areas in India, China and the Middle East, marginal sources can help meet the demand for water. Desalination and reuse technologies will secure a reliable source of water and help the industry manage its water impact....

    By Global Water Intelligence (GWI) based in Oxford, UNITED KINGDOM.

  • RCRA Waste Processing

    With over 40 million tons of recycled waste in the U.S. each year, operators are fervently searching for innovative methods to treat and dispose of RCRA wastes. VulcanĀ® Systems' thermal desorption technology is a proven method for recycling RCRA wastes in a manner that is efficient, affordable, and compliant with the Resource Conveservation and Recovery Act of 1976. The technology devolatizes hydrocarbons and captures them in a condensor for potential use in fuel blending, while also allowing the delisted end...

    By Vulcan Drying Systems based in Moberly, MISSOURI (USA).

  • Waste recovery for petrochemical wastes

    Traditionally, the Petrochemical Sector has operated with basic technological solutions, with ultimate reliance on High Temperature Incineration (HTI) and landfill in order to deal with their hazardous wastes. However, tightening regulation, increasing landfill costs and social responsibilities are driving companies to look at alternative methods of treatment of very challenging wastes, including the treatment of:

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

  • Flotation-Filtration System for Metalworking

    akvoFloat is a separation technology based on a proprietary flotation-filtration process. It has been designed for the treatment of industrial process water and wastewater in the most challenging operating conditions. Within the metalworking industry it is the most cost-effective water treatment technology for the reuse and discharge of metalworking fluids.

    By akvola Technologies GmbH based in Berlin, GERMANY.

  • Cleaners & assembly lubricants for Laboratory industry

    Whether you need to remove biological debris, fingerprints, protein, starch, or dye, our cleaners provide consistent results. An economical 1-2% concentration in water is effective in most cleaning applications. Our laboratory cleaners are excellent for use on flasks, pipettes, slides, stainless steel, plastic, and other laboratory equipment and surfaces. When rinsed properly, our cleaners leave no residue.

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Remedial Construction for Mining and Metals

    ENTACT is the industry leader in the management and treatment of heavy metal impacted soil, sludge, and debris. Approximately half of the projects we have completed over the past 21 years have involved metals. These projects have included soil and sediment removal, residential cleanups, smelter closures, earthwork/mine reclamation, and decontamination and demolition of mine and mill structures at both active and abandoned facilities. ENTACT holds seven patents related to treatment of heavy metal impacted materials.

    By ENTACT, LLC based in Grapevine, TEXAS (USA).

  • Cleaners for Pharmaceuticals & biotechnology industry

    Our precision cleaners provide consistent results with every use and leave surfaces completely clean. They have been proven effective in critical cleaning applications including mixing tanks, tablet presses, fluid lines, batch process tanks, filter membranes, and other equipment. An economical 1-2% concentration in water is effective in removing gels, emulsifiers, oils, titanium dioxides, dyes, silicons, fragrances, petrolatum, paraffins, insoluble salts, oxides, blood and proteins.

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Cleaners for Medical devices industry

    Our precision cleaners provide consistent results with every use and leave surfaces completely clean. Our products have long been used in pre-sanitization washes of implantable medical devices and prosthetics such as knees, hips, pins, screws, and tubing. Machining oils, burrs, metal fines, and other soils are easily removed from stainless steel, titanium, ceramic and other metal and plastic surfaces.

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Cleaners for Personal care/cosmetics industry

    Our full line of free-rinsing precision cleaners are effective in a wide variety of cosmetic cleaning applications. An economical 1-2% concentration in water is effective for most cleaning applications. Typical uses include removing oils, dyes, fragrances, gels, titanium dioxide, silicons, petrolatum, paraffins, emulsifiers, insoluble salts and oxides. Use to clean hard surfaces including stainless steel, ceramics, plastics and glassware. Our line of cleaners can deliver the critical/precision cleaning needed to...

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Assessing underground infrastructure for energy & refining industry

    Nuclear and coal are still significant means of producing energy for electricity which is crucial for daily functionality. In order to generate power that meets everyday needs, pipeline infrastructure at these facilities need to be well maintained. Proactive inspections of these pipeline networks can improve pipeline integrity and safety for owners of power generation assets, as well as be a cost-effective means of maintaining them. The nation’s economy depends on electricity being available 24/7. EnTech®...

    By EnTech Engineering Company based in Saint Louis, MISSOURI (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you