Only show results available in Virginia? Ok

Hazardous Waste Applications

  • Waste Management Issues

    • Consulting, development and registration of the Declaration on Formation of Waste (according to the Decree of the Cabinet of Ministers of Ukraine No. 1218 of 03.08.1998 (most recent version dated 30.10.2013); • Development of the Registry Map of the Object of Formation of Waste (RM OFW) and/or the Registry Map of the Object of Handling and Disposal of Waste (RM OHDW) (according to the Decree of the Cabinet of Ministers of Ukraine No. 1360 of 31.08.1998 (most recent version dated 30.10.2013); • Inventory of Waste (the detection, identification, description and registration of waste, amounts accounting of their formation, recycling and removal; the identification and examination of waste's places and objects of waste operation); • Development of guidelines for safe waste disposal; • Development of technical passports of different hazardous wastes; • Development of a Passport for a Sites for the Disposal of Waste (PSDW).

    By PP `Tehnologia O` based in Vinnytsia, UKRAINE.

  • Stack Testing for VOC Recovery Afterburner Installation

    HAZARDOUS WASTE HANDLING INDUSTRY: Conducted on-site GC speciation of VOC constituents by Method 18 collecting samples continuously around-the-clock in large vacuum canisters in order to demonstrate compliance control of a VOC recovery/afterburner installation

    By AirSource Technologies, Inc. based in Shawnee, KANSAS (USA).

  • High-calcium lime slurry for environmental reclamation industry

    Lime slurry can be easily applied to rough terrain with a fine spray, minimizing waste and dust migration while providing a much safer, cost effective alternative. Flue gas treatment for industrial facilities and hazardous waste incinerators.

    By Sudbury Lime Ltd. based in Copper Cliff,, ONTARIO (CANADA).

  • Handling hospital waste and laundry

    Large amounts of hazardous waste, contaminated waste and dirty laundry are handled in modern hospitals, and so hygiene and staff safety are important. This is why it is important to find sustainable waste solutions which do not require waste to be physically touched. This is achieved with the Envac vacuum system.

    By Envac AB based in Stockholm, SWEDEN.

  • Premium

    Crushing of hazardous waste with Mercodor crushing systems

    The crushing of hazardous waste such as, for example, sensors, refrigerators, toner cartridges and asbestos is a real challenge for every crushing machine from environmental protection point of view. The Mercodor crushers are best suitable for the crushing of hazardous waste such as asbestos, toner cartridges, refrigerators and sensors.

    By MERCODOR GmbH Sondermaschinenbau KG based in Frankfurt am Main, GERMANY.

  • Premium

    Waste Management Solutions for Metal Manufacturing Industry

    There are several challenges faced by the metal manufacturing industry. Firstly, there is a drive to recover as much metal credit as possible before disposal of by-products as wastes. Secondly, there is a requirement to minimise waste generation or alternatively minimise the costs of managing the disposal of any hazardous waste material generated during the manufacturing process. Finally, keeping the company competitive by generating value or by reducing costs in the manufacturing process. Any solutions that can overcome these challenges must be considered. Tetronics can assist with a range of metal manufacturing waste challenges, including:

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

  • Premium

    Waste water

    Physico-chemical parameters alone are not sufficient in obtaining reliable information on treated wastewater. Online toxicity monitoring must be performed in combination with routine chemical analysis. The assessment of biological effects of wastewater discharges in the ecosystems is today considered relevant and ecotoxicological tests identifying the ecological hazard are useful tools for the identification of environmental impacts.

    By microLAN B.V. based in Waalwijk, NETHERLANDS.

  • Premium

    Recycling equipments for shredding hazardous waste

    The disposal of hazardous waste requires special handling to ensure that safety and regulatory requirements are met. Preparing the waste for incineration or burial requires equipment that is durable and reliable so that the materials are processed safely and in accordance with the regulatory requirements.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Laboratory analysis for environmental consulting

    Ormantine USA works closely with consultants, engineers, and other environmental professionals on a daily basis to help find the best solutions to meet individual needs. Ormantine air and soil samplers can be used in: Remediation Performance; Soil Gas Monitoring; Site Assessments; Brownfield Redevelopment; Landfill / Waste Management; Decontamination; Hazardous Material Investigations; Emission Monitoring & Testing; Exposure Assessment; Industrial Hygiene and Risk Management

    By Ormantine USA Ltd., Inc. based in Palm Bay, FLORIDA (USA).

  • Premium

    SSI builds shredding systems for alternative fuels processing

    SSI designs and manufactures size reduction systems to prepare solid wastes for thermal treatment or conversion to alternative fuels. SSI Shredding Systems, Inc. has been developing and refining a wide range of products and engineered system solutions to convert waste materials into usable fuels for industry. SSI has the experience, product range and desire to exceed your expectations.

    By SSI Shredding Systems, Inc. based in Wilsonville, OREGON (USA).

  • Automated solutions for the hazardous waste pit dredging

    Liquid Waste Technology’s electric and diesel driven dredges can improve safety for workers dredging hazardous materials. Our custom built dredges can be equipped with remote control to allow workers to stand up to 762 meters (2500 feet) away from the toxic area, increasing their safety. Liquid Waste Technology can build dredges with automated controls, that dredge entire ponds using PLC controls. This increases workers safety and productivity in hazardous dredging applications.

    By Liquid Waste Technology LLC (LWT LLC) based in New Richmond, WISCONSIN (USA).

  • Environmental Reporting

    The Q EHS Environmental Reporting suite provides key tools for compliance with environmental legislation pertaining to the management, storage, use release, and disposal of hazardous materials. The software was developed to produce a variety of practical reports such as: • Performance and compliance assessments • Regulatory report submittals • Metrics and trend analyses for facility, divisional, and corporate management • On-site environmental incident occurrences Q EHS Air - Q EHS Waste - Q EHS Water - Q EHS Hazardous Materials Allow you to: • Associate and roll up usage data to appropriate unit - Business - Group - Sector - Division - Geographic - User-defined parameter • Estimate expected and potential emissions from various sources • Establish operating limits for automated checks and warning messages

    By Quantum Compliance based in Ann Arbor, MICHIGAN (USA).

  • Premium

    Applications and Air Pollutants Removed in Hazardous, Solid and Liquid Waste Treatment Operations

    Venturi scrubbers with FORCE FLUX Condensation technology and Wet Electrostatic Precipitators for industrial, municipal, sewage sludge and pathological waste incinerators to remove micron, submicron particulate, heavy metals and acid gases. Special quencher/scrubber systems for dioxin removal. HCL scrubbing from PVC plastic waste burning. Fine particulate, acid gases and NOx removal on munitions destruction. Cleanup of all pollutants from liquid waste incinerators and other high temperature destruction processes. Acid and particulate emissions from electronic board and metals recovery operations.

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Premium

    Waste recovery for construction industry

    Construction waste consists of unwanted material produced directly or incidentally by the construction industry. This includes materials that may contain lead, asbestos or other hazardous materials. There is increasing pressure on the construction industry to dispose of this hazardous material in an environmentally responsible manner. Tetronics can help alleviate this pressure by providing waste recovery plants to deal with all types of hazardous wastes generated from a construction projects lifespan: from land remediation through to the treatment of APCs from incineration as well as the treatment of asbestos.

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

  • Premium

    Very large waste gas volumes with low contaminant concentration

    The CTP desorption allows for an especially high concentration factor which, in turn, reduces the cost of ownership and permits an auto-thermal operation (additional burner switched off) even when the contaminant concentration is low.

  • Premium

    Processing of LCD screens

    The safe extraction of valuable raw materials: robots automatically dismantle monitors containing mercury, while protecting workers’ health at the same time. According to initial projections, around three million LCD screens will be recycled in Germany in 2016. However, their backlighting system often contains mercury, which means they are classified as 'hazardous waste' in accordance with the EWC, and as 'Collection Group 3' in accordance with the Electrical and Electronic Appliance Law. They also contain valuable raw materials, such as metals and plastics, which have to be recovered in such a way, that the environment is not harmed. However, recycling specialists, Erdwich Zerkleinerungssysteme GmbH, have now developed an alternative: The company from Kaufering has developed an automatic processing system that enables mercury and other valuable raw materials to be easily extracted and recycled in an environmentally-friendly way.

    By Erdwich Zerkleinerungssysteme GmbH based in Kaufering, GERMANY.

  • Premium

    Medical and Bio-hazard Waste Treatment Technology with zero emissions

    The OZONATOR technology is the new NG-3000 model capable of processing up to 400 kg (880 lbs.) of waste every twenty minutes (1200 kg per hour) and can operate on a continuous basis 24 hours per day – 7 days per week with about one hour per week for service and cleaning. The waste is shredded with up to 90% reduction in volume and treated with a high concentration of ozone (sterilized) and then compacted into a stainless steel transport bin for disposal at landfill as general waste (daily cover) or the treated waste can be used as fuel in a WTE (waste-to-energy) facility. (CV 36.4 MJ/kg)

    By OZONATOR Industries Limited based in Regina, SASKATCHEWAN (CANADA).

  • Premium

    Quarantined and International Waste

    Medical (Healthcare) Waste. Bio-hazardous waste. Pathological Waste. Cultures and stocks of infectious agents and associated biological agents. Liquid human and animal waste, blood and blood products and body fluids. Contaminated waste from animals. Sharps. Anatomical. Quarantined waste (airport and border protection). General waste (i.e. kitchen waste, etc.).

    By OZONATOR Industries Limited based in Regina, SASKATCHEWAN (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you