Only show results in Connecticut? Ok

Industrial Cleaning services for Waste and Recycling

  • Premium

    Repairs Services

    In our newly-equipped and designed repair center, we offer repairs of AERZEN Positive Displacement Blowers, Screw Compressors and Gas Meters as well as external blower and compressor stages. No matter whether you ask for the repair of an AERZEN stage or an external stage you in person can effect assembly and disassembly of the stages as well as ...

    By Aerzener Maschinenfabrik GmbH based in Aerzen, GERMANY. from Field Service Service line

  • Premium

    On-Site Quasar Preventative Solutions

    LumaSense Technologies, Inc. can schedule to have an experienced and dedicated Field Service Engineer come out to your site to perform field commissioning and inspection. This includes troubleshooting and field verification of calibration of your E2T Quasar Flare Monitoring Systems.

    By LumaSense Technologies, Inc., An Advanced Energy Company based in Milpitas, CALIFORNIA (USA). from On-Site Calibration and Repair Service line

  • Premium

    MEVA / OSNA Parts Services

    WesTech is the licensee for all Meva Nordic Water headworks equipment in North America. WesTech has your MEVA part or new piece of equipment.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA). from Parts & Services Service line

  • Premium

    Fischer Edelstahl - Wastewater Treatment

    Fischer Edelstahl GmbH, a company based in Achern in Germany, has a hall for washing machine parts and transport equipment soiled with various substances, including cooling lubricant emulsions. The assembly cleaning process, which involves a high-pressure cleaner, a part washing machine and floor cleaning machines, produces approximately 3 m³ ...

    By EnviroChemie GmbH based in Rossdorf bei Darmstadt, GERMANY. from Service line

  • Premium

    Repair Services

    Repairs are essential too. If performed swiftly and correctly, they cause no inconvenience. We are able and willing to do this for you. However, only cleaned parts can be repaired. The parts affected by this and the factors to be taken into account can be found in our Guideline Repair . In addition, safety data sheets relating to the ...

    By ProMinent GmbH based in Heidelberg, GERMANY. from Services Service line

  • Premium

    Structured Media Care Program Services

    Dürr Megtec offers an oxidizer structured media care program that can help restore the overall efficiency and effectiveness of regenerative thermal oxidizers (RTOs) and regenerative catalytic oxidizers (RCOs).

    By Dürr Systems, Inc. based in De Pere, WISCONSIN (USA). from Dürr Megtec Services and Support Service line

  • Premium

    Oily Water Clean Up Services

    Centrifuges Unlimited has field proven technologies to efficiently separate oily water/slops waste at source, minimising the amount of waste streams generated during cleaning or decommissioning workscopes.This is achieved through a process of mechanical (centrifugal) and if necessary, specialised chemical separation, to separate fluids/solids ...

    By Centrifuges Un-Limited based in Aberdeen, UNITED KINGDOM.

  • Premium

    WEDA - Clean Your Lagoons and Fountains with Weda Underwater Cleaners

    Today Weda has over 5 years experience of supplying cleaners for large outdoor Lagoons and Fountains. Keeping these large bodies of water free from sedimentation and algae is a big problem worldwide. With Weda clkeaners of various sizes, pumping capacities and brush definitionsthis work becomes simpler and morte efficient than most other slutions. ...

    By Weda AB based in Södertälje, SWEDEN.

  • Premium

    Spare Parts & Accessories

    As part of our DISAB Service program, we offer genuine spare parts and accessories with the same great quality as our machines and system solutions to ensure our customers receive what is best on the market. Our accessories range from suction hoses to cleaning nozzles and make all the difference to the performance and efficiency of cleaning, dust ...

    By Disab Vacuum Technology based in ESLÖV, SWEDEN. from Aftersales & Support Service line

  • Premium

    Services

    From the most complicated data highway interfaces to the simplest open vent, L&J Technologies is the single source for your tank service needs. For more than thirty years, L&J Technologies technical service specialists have repaired computer systems, electronic gauges, conservation vents, and other tank fittings.

    By Shand & Jurs (L&J Technologies & L&J Engineering) based in Hillside, ILLINOIS (USA).

  • Premium

    RTO/RCO Media Care Program

    Your structured media bed can often be plugged by inorganics or particulate that are difficult to remove with a bake-out, vacuuming, or basic flush. Durr MEGTEC (Dürr MEGTEC) offers a high volume chemical cleaning system solution that can help restore your equipment’s air flow and overall performance which can lead to energy savings.

    By Dürr Systems, Inc. based in De Pere, WISCONSIN (USA).

  • Premium

    Weld Smoke Solutions

    Clean Air Safeguarding for the Entire Shop Floor. Welding toxic fumes and laser-cutting dust can threaten employee safety, derail productivity, and place you directly in the crosshairs of the EPA. Just a single spark can ignite welding “smoke” and endanger your entire shop floor. Welding contaminants can also reduce the life of your ...

    By Duroair Technologies Inc. based in Niagara Falls, ONTARIO (CANADA). from Solutions Service line

  • Premium

    Blast Design Services

    In addition to conventional analytical and empirical methods, Itasca has developed Blo-Up, a proprietary tool for blast analysis as part of the HSBM consortium. Blo-Up can be used to understand blasthole-to-blasthole interaction, optimize fragmentation and throw, and minimize undesirable damage (e.g., smooth blasting for wall ...

    By Itasca International, Inc based in Minneapolis, MINNESOTA (USA). from Mining Service line

  • Premium

    KEG - Troubleshooting Services

    It is essential to troubleshoot your jetting equipment correctly. When testing the jetting system, it is essential to understand where the water is going. It is vital to understand the readings provided when checking your equipment. The problem is not always what is thought to be the obvious one.

    By KEG Technologies, Inc. based in Spartanburg, SOUTH CAROLINA (USA).

  • Environmental Services

    R. Baker & Son, a Service-Disabled Veteran-Owned Small Business (SDVOSB), has the expert safety trained personnel and decontamination equipment to perform a wide range of environmental services. Our personnel are OSHA safety trained and experts in environmental remediation and decontamination. Our fleet of equipment includes excavators, power ...

    By R. Baker & Son All Industrial Services based in Red Bank, NEW JERSEY (USA).

  • PBS - Ceramic Core Leaching

    We offer technology for removing ceramic cores in a leaching autoclave that removes the ceramic cores in castings for demanding applications in the aviation and power engineering industries.

    By PBS Velká Bíteš, a.s. based in Velká Bíteš, CZECH REPUBLIC. from Casting Technologies Service line

  • Project Management

    Our specialists work with you onsite to develop the best solution to spills, cleanup projects, remediation, recycling and other specialty cleaning and removal activities. As the single point of contact, your Safety-Kleen Project Manager delivers these solutions from our network of recycling, transportation and disposal facilities and personnel. ...

    By Safety-Kleen Systems, Inc., a Clean Harbors Company based in Richardson, TEXAS (USA).

  • Kleenoil - Filter Cartridge Services

    The Kleenoil Onboard Oil Recycling System was designed to ensure the effectiveness of continuously cleaning oils used in internal combustion engines and hydraulic systems. During field tests the Kleenoil Onboard Oil Recycling System was entensively used over a five year period in a wide range of engines and hydraulic applications. Kleenoil Onboard ...

    By Kleenoil USA Inc based in Plano, TEXAS (USA).

  • Maintenance and Support Services

    Dynatec supports its existing plants by providing expert technical assistance when problems or necessary process changes occur. Dynatec uses qualified engineers to offer technical assistance and process recommendations. In most cases, the engineer who designed the plant and oversaw the construction and startup will provide direct support to the ...

    By Dynatec Systems Inc. based in Burlington, NEW JERSEY (USA).

  • Services

    Klinkau has more than 30 years of experience in the filtration sector and has offerings that go far beyond the production and sale of filter elements. Klinkau provides all the support needed right from the planning phase. Following detailed process analysis, the filter elements required undergo geometric and constructive design and are correlated ...

    By Klinkau GmbH + Co based in Marktoberdorf, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you