Industrial Shears News

  • ANDRITZ MeWa to supply new processing line for pulper rags to Papier- und Kartonfabrik Varel, Germany

    ANDRITZ MeWa, part of international technology Group ANDRITZ, has received an order from Papier- und Kartonfabrik Varel, based in Varel, Germany, to supply a processing line for pulper rags. Pulper rags are a very tightly entangled mechanical compound of metallic and non-metallic components formed during pulping of recovered paper or pulp in the vortex center of a pulper. ANDRITZ ...


    By ANDRITZ MeWa GmbH

  • DOE Announces $23 Million In Funding For SBIR Phase II Winners

    On June 21, 2016, DOE announced the 23 projects that were selected for Phase II funding through the Small Business Innovation and Research (SBIR) program. Each SBIR award is for $1 million over the next two years, and helps small businesses advance ...


    By Bergeson & Campbell, P.C.

  • Sulzer Sharpens the Offering of Agitators to the Wastewater Industry with Scaba TreatX

    Scaba TreatX are standardized Scaba agitators, available with short lead times and at competitive prices. The agitators are built of Scaba modules with excellent hydraulics and low energy usage. The agitators have a robust stainless steel design. The Scaba TreatX concept is developed especially for the municipal and industrial water and wastewater industry for the applications flash mixing, ...


    By Sulzer

  • New Chemineer™ JT-2 Impeller Offers Superior Blending in Transitional Flow

    The new Chemineer JT-2 Impeller has been developed for superior blending in transitional flow. Higher viscosity and non-Newtonian fluids make blending much more challenging. The new impeller is used after conventional turbines have lost efficiency due to viscous effects and before the need for close clearance impellers. The design promotes blending by efficiently moving ...


    By National Oilwell Varco

  • Fifteen Percent Less Horsepower Required in Zinc Recovery Application due to Chemineer™ Model 20 and HT Agitators

    A state-of-the-art metal recovery project requires all equipment and systems to work in perfect unison and perform to optimal efficiency. A manufacturer in the southeast United States, specializing in zinc recovery technologies, approached the Mixing Technologies group of NOV for its minerals processing application experience, robust equipment design and technical consulting ...


    By National Oilwell Varco

  • Fifteen Percent Less Horsepower Required in Zinc Recovery Application due to Chemineer™ Model 20 and HT Agitators

    A state-of-the-art metal recovery project requires all equipment and systems to work in perfect unison and perform to optimal efficiency. A manufacturer in the southeast United States, specializing in zinc recovery technologies, approached the Mixing Technologies group of NOV for its minerals processing application experience, robust equipment design and technical consulting ...


    By National Oilwell Varco

  • Maren Balers… turning waste into energy!

    Yerecic Label of New Kensington, PA, is diverting their “non-recyclable” pressure-sensitive label stock waste, from landfills to fuel a cement kiln. Yerecic invested in a Maren ProPAK60 baler to effectively bale the material, and reduce the number of costly transports to the kiln site. Chosen for its structural ability to hold up under point loading stress, easily shear through the ...

  • Chemineer Express™ Expands Mixer Installation and Maintenance Services

    Dayton, Ohio - The Mixing Technologies Group of NOV has expanded the services provided by Chemineer Express. In addition to providing high quality mixer parts, ready access to extensive failure analysis, fast delivery of replacement parts and assemblies, and reliable repair service, Chemineer Express now offers even more technical support services.  Chemineer Express now offers customized ...


    By National Oilwell Varco

  • Dan Burda Metal Shredding With The 100-72 Eidal Shredder

    The eidal monster series of shear type shredders and the eidal monster series of vertical shredders are teamed together in a pair to process and upgrade scrap metal into a frag form or a densified form for upgrade value The eidal model 100-72 shear shreder with a 300 hp drive and 4 inch thick cutters can process metal scrap including automobiles with engines  ...

  • Digital Overhead Stirrers and Viscosity…

    Camlab have a good choice of overhead stirrers for most applications. The type and choice of accessories is really determined by the size and viscosity of the sample. The larger the product and the more viscous it is, the more powerful the stirrer with more torque to move the paddle through the liquid at an even rate. The ...


    By Camlab Limited

  • Update of an old Rotor Shear at a incineration plant

    Attero Moerdijk is a large incineration plant for household and bulky waste, processing about 1 million tons of waste per year. Previously a Lindemann rotor shear was used to shred the bulky waste before incineration, but due to high wear and maintenance costs and limited capacity it was taken out of production several years ago. With no shredding facilities on-site, for the past few ...


  • Fluidized Bed Mixer Ultra-Fast, Gentle

    A new 5 cu ft (142 liter) capacity Fluidized Bed Mixer model MF-5-SS from Munson Machinery, gently mixes low- to medium-density bulk materials, including liquid additions, in 10 seconds to two minutes, with 30 seconds typical. Unlike ribbon, paddle and plow blenders with a single shaft turning agitator blades slowly ...

  • Granutech Selects the MSA Group as South and Central America Distribution Partner

    Granutech-Saturn Systems, a world-leading manufacturer of industrial shredders and other recycling equipment based in Texas, USA announced that it recently appointed the MSA Group’s Recycling Division based in Bogota, Colombia with regional Offices in Brazil, as its exclusive distributor for Central & South America (excluding Mexico) The MSA Group will be representing Granutech’s ...


    By Granutech-Saturn Systems

  • Used 2003 Excel 2R63 Two Ram Baler FOB NC $90,000.00

    2003 Excel 2R63 baler for sale. Specs below. Photos attached. Available in 2 weeks. Asking $90,000 FOB NC Save time, labor, and money with a complete turn-key solution for your baling needs. The 2R63 two-ram, auto-tie baler chassisutilizes the same interlocking designs found in larger EXCEL two-rams while remaining very economical. The 2R63 is constructed of four solid steel ...

  • Vee-Cone Blender Discharges Fully, Sanitizes Quickly

    A new Model VB-10-316S Sanitary Vee-Cone Blender with 10 cu ft (283 liter) capacity has been introduced by Munson Machinery. The smooth internal surfaces are free of baffles, shafts and bearings, allowing unobstructed material flow, as well as complete discharge through a gate valve. According to the company, the ...

  • Used MSI Two Ram Baler for sale as is $95,000.00 ready for delivery

    Model #: 2R95-­12-­4-8 Two Ram Baler $95,000.00 FOB: Newton, NC Ready for Delivery, Can be seen running. Contact us to schedule an appointment to see this MSI Two Ram Baler. Details Motors: Dual 50HP (100HP) Hopper: 90” x 58” x 35” tall ...

  • 2013 China-ASEAN Forest and wood Products Expo

    2013 China-ASEAN Forest and wood Products Expo November 12, 2013 On Nov 15 ~ 18, 2013, the 2013 China-ASEAN Forest and wood Products Expo is held in Nanning International Conference & Exhibition Center. On this Expo, woodworking machines, and a variety of wood products are exhibited. Many manufacturers & supporting manufacturers are ...


    By V&T Technologies Co., Ltd.

  • Used 500 Horsepower High Volume, Large Material SSI 6000 Shredder

    SSI 6000 is a low-speed, high-torque, two-shaft, rotary shear shredder designed to ef!ciently process a variety of dif!cult materials. High Volume Municipal Waste Heavy Industrial Waste Oversize Bulky Waste Demolition Waste Steel Drums / Ferrous Wood / Pallets Passenger,Truck and OTR Tires Baled & Bulky Materials and more… This Shredder will be ...

  • EPA Orders a Stop Sale of Hampton Manufacturing, Inc’s “Antibacterial H-42 Clipper Cleaner”

    The U.S. Environmental Protection Agency (EPA) issued a Stop Sale, Use, or Removal Order (SSURO) to Hampton Manufacturing, Inc., located in Fayetteville, GA, to stop the sale of “Antibacterial H-42 Clean Clippers,” a pesticide used to kill bacteria and HIV-1 (AIDS Virus) on cutting tools such as clipper blades, shears and manicure implements. The SSURO was issued to Hampton ...

  • Multi-Cut – our new multi talent of EHT

    A new powerful, hydraulic plate shear fully equipped is now modernising our production facility. It is perfectly suiting to our high-precision cut and serial production. Adjustment of die clearance and cutting angle, integrated handling systems like upholding mechanism of the plates and automatic refeeding of the plates to the machine’s front side provide a high throughput and improve our ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you