Medical Waste Applications

29 Results found
Only show results available in Virginia?
OK
  • Category: Waste & Recycling ×

  • Subcategory: Medical Waste ×

Handling hospital waste and laundry

by Envac AB     based in Stockholm, SWEDEN

Large amounts of hazardous waste, contaminated waste and dirty laundry are handled in modern hospitals, and so hygiene and staff safety are important. This is why it is important to find sustainable waste solutions which do not require waste to be physically touched. This is achieved with the Envac vacuum system.

WASTE WATER TREATMENT

by DAKSHA GREENTECH INTERNATIONAL     based in BANGALORE, INDIA

WASTE WATER TREATMENT MADE EASY WITH THE INTRODUCTION OF D-ANOOOZ PROCESS. IT WORKS ON VARIABLE INPUT OF EFFLUENT. LOW ENERGY CONSUMPTION, NO SOUND, MINIMUM MAINTENANCE. ENERGY CAN BE TAPPED IN THE FORM OF METHANE GAS FROM ANAEROBIC DIGESTION. TARGET CUSTOMERS ARE SCHOOLS, UNIVERSITIES, HOSTEL, HOTELS, HOSPITALS, RESIDENTIAL LAY OUTS.

Waste handling in flight catering kitchens

by Envac AB     based in Stockholm, SWEDEN

Large catering kitchens at airports are operational more or less round the clock. They have to deal with enormous amounts of waste from incoming aircraft, food preparation kitchens and staff canteens. Compared with traditional manual refuse collection methods, an automated kitchen waste system is safer, more efficient, more hygienic – and cheaper in the long run.

Air Pollution for General Industrial Applications

by ERG (Air Pollution Control) Ltd     based in Horsham, UNITED KINGDOM

With 30 years` experience, and more 300 operational, industrial air pollution plants, ERG has an extensive reference list to draw on. So even if your application does not fit neatly into one of the categories described in our portfolio of experience, we are likely to have relevant experience to help us solve your air pollution problem.

Measurement solution for measuring total VOC via FTIR

by Protea Limited     based in Middlewich, UNITED KINGDOM

Current Total VOC Measurements

The most common, and current standard, method for measuring Total Volatile Organic Compounds (VOC) is the use of a Flamed Ionisation Detector (FID). This gives a representative value of the total carbon content of a gas stream, as the FID cannot tell which specific organic compounds are present.

Recycling equipments for shredding & reducing medical waste

by Granutech-Saturn Systems     based in Grand Prairie, TEXAS (USA)

Shredding and reducing medical waste poses special challenges. Processing must meet stringent regulatory standards for the safe handling of infectious and red bag waste, including precise size reduction to ensure proper sterilization. In addition, the waste is comprised of many different materials, ranging from sharps to textiles, requiring shredders that can effectively process the variety of materials.

Pure drinking water solutions for laboratories

by Pure & Secure, LLC.     based in Lincoln, NEBRASKA (USA)

For 40 years our water distillers have been used in laboratories throughout the world to produce high-purity distilled water. Not only are our stainless steel systems durable and reliable, but they waste much less water and are less expensive than the other brand of popular laboratory water distillers. Whether your facility is a medical, dental or research laboratory, our water distillers can be configured to meet any grade of water that you need. Simply tell us what grade of water you need to achieve and we will configure the best system to meet your specific needs.

Water systems for industrial sector

by Magnation Water Technologies - Magnation Corporation     based in Oakland, CALIFORNIA (USA)

The Magnation Industrial Next Generation and Big Blue Pump & Irrigation systems, and Rainbolt Well systems are designed to reduce the impact of scaling,and improve water flow and energy efficiency in virtually any industrial application. Guaranteed less salts, less energy use, less chemical use, and reduced maintenance while extending the longevity of pipes. Our non-chemical system is available in a complete range of sizes, from the 2” Diameter System to large-scale applications including well drilling, manufacturing and processing plants, car washes, golf courses, construction, real-estate developments and power plants, to name a few.

Positive displacement pumps for biopharmaceutical industry

by Watson-Marlow Fluid Technology Group     based in Falmouth, UNITED KINGDOM

Pharmaceutical and biotechnology processes demand sterility and precision in order to ensure the integrity and quality of the end product. Fluid isolation, and precise metering are essential.

EH&S Regulatory Compliance Management for Electronics And Medical Devices

by 3E Company     based in Carlsbad, CALIFORNIA (USA)

Few industries face the mounting challenges and scrutiny of expanding environmental compliance requirements, ecological mandates, consumer expectations and NGO watch groups as much as electronics and medical device manufacturers. Even before the Sony PlayStation cadmium crisis, the entire supply chain has been inundated by an ever-expanding myriad of legislation, ranging from the EU Directives on waste electrical and electronic equipment (WEEE), the restriction of hazardous substances (RoHS) and the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) to US legislation on conflict minerals. The depth and amount of information that suppliers must access, evaluate, compile, integrate and disclose is growing exponentially.

Shredders for Hazardous and Medical Waste

by SA Eng Soluzioni per l`Ambiente     based in San Donà di Piave, ITALY

SA Eng. designs and manufactures single machines and / or complete plants for the treatment of Hazardous Waste. The supply can relate to the single shredder used only for the volume reduction of the material or to imply the use of a Nitrogen Blanketing System of the machine and / or of the complete system with subsequent separation of the product. SA Eng. provides for the study of customized systems in compliance with the specific need/request of each customer.

Shredding machines for various applications

by Lindner-Recyclingtech GmbH     based in Spittal/Drau, AUSTRIA

Every material makes different demands on a shredding machine. A wide range of products with innovative and reliable technology creates the crucial pre-conditions for your resources to be turned into high quality products.

Gas monitoring instruments and systems for anesthetic gases

by Gasmet Technologies Oy     based in Helsinki, FINLAND

The anesthetic gases and vapors which leak into the indoor atmosphere during medical procedures are considered waste anesthetic gases (WAGs). The exposure is of relevance to thousands of professionals in hospitals, operating theaters, patient recovery rooms, dental offices, and veterinary clinics around the world, who may be continually exposed to the waste anesthetic gases during their workday. Typical gases of concern include nitrous oxide N2O and several halogenated compounds in vapor form, such as sevoflurane, isoflurane, enflurane, halothane, desflurane, and methoxyflurane. Short-term exposure to these gases may lead to several symptoms, such as dizziness, headaches, fatigue, nausea. Long-term exposure to some of the anesthetic agents may result in sterility, birth defects, cancer, and liver and kidney disease.

Medical and Bio-hazard Waste Treatment Technology with zero emissions

by OZONATOR Industries Limited     based in Regina, SASKATCHEWAN (CANADA)

The OZONATOR technology is the new NG-3000 model capable of processing up to 400 kg (880 lbs.) of waste every twenty minutes (1200 kg per hour) and can operate on a continuous basis 24 hours per day – 7 days per week with about one hour per week for service and cleaning. The waste is shredded with up to 90% reduction in volume and treated with a high concentration of ozone (sterilized) and then compacted into a stainless steel transport bin for disposal at landfill as general waste (daily cover) or the treated waste can be used as fuel in a WTE (waste-to-energy) facility. (CV 36.4 MJ/kg)

Quarantined and International Waste

by OZONATOR Industries Limited     based in Regina, SASKATCHEWAN (CANADA)

Medical (Healthcare) Waste • Bio-hazardous waste • Pathological Waste • Cultures and stocks of infectious agents and associated biological agents • Liquid human and animal waste, blood and blood products and body fluids • Contaminated waste from animals • Sharps • Anatomical • Quarantined waste (airport and border protection) • General waste (i.e. kitchen waste, etc.)

Solutions providing corrosion protection

by B-Team Corrosion Protection     based in Bucharest, ROMANIA

B-Team Corrosion Protection offers complete solutions providing corrosion protection for food processing plants. The composition of jointless lining systems comply with most food laws so that they are highly appropriate for use in the food processing industry. Typical applications in the food industry include:: Storage Tanks for starch production Pots and containers Sterilizers Processing zones Floors Water treatment systems Fermenters for the brewing industry

Waste recovery for petrochemical wastes

by Tetronics (International) Limited     based in Swindon, UNITED KINGDOM

Traditionally, the Petrochemical Sector has operated with basic technological solutions, with ultimate reliance on High Temperature Incineration (HTI) and landfill in order to deal with their hazardous wastes. However, tightening regulation, increasing landfill costs and social responsibilities are driving companies to look at alternative methods of treatment of very challenging wastes, including the treatment of:

Waste handling in nursing homes

by Envac AB     based in Stockholm, SWEDEN

Large amounts of hazardous waste and contaminated waste are handled at modern nursing homes, and so hygiene and staff safety are important. This is why it is important to find sustainable waste solutions which do not require waste to be physically touched. This is achieved with the Envac vacuum system.

Wastewater Treatment for the Chemical industry

by HydroThane STP BV     based in KC `s Hertogenbosch, NETHERLANDS

In addition to the food industry, biological anaerobic and aerobic technologies can be applied in the chemical and pharmaceutical industry as well.

Typical for the chemical and pharmaceutical waste water is the high organic pollution, which is often limited to only a few components that can be present in high concentration. Every production site has its own unique effluent composition.

This type of effluents require tailor-made solutions. The Upflow Anaerobic Sludge Blanket (UASB) process and the External Circulation Sludge Bed (ECSB) process from HydroThane are worldwide proven processes for the treatment of this type waste water.

Some chemical /pharmaceutical production processes where anaerobic technology has been applied are:
- Purified Terephthalic Acid (PTA)
- Phenol
- DMT
- Penicillin
- Insulin.

Need help finding the right suppliers?

Let the XPRTs do the work for you