Granutech Saturn Systems design and manufacture white goods shredders and systems capable of sorting the ferrous fraction from the fluff and can equip these with eddy current and other finder technology to sort aluminum, stainless, and other recoverable metals.
The value of Zorba – shredded non-ferrous metals originating from end-of-life vehicles or WEEE – continues to increase, as the demand for copper, nickel and brass created by modern lifestyles is on the rise. TOMRA’s sensor-based sorting technology can double the value of Zorba.
The recycling of wood has a very important role in the reuse of the same for industrial purposes or use for the production of renewable energy.
In both cases the quality of the grinding and the purity of the material is fundamental, which must be free of metals and other contaminants.
The possibility to use shredders, grinders or granulators to deal with individual necessities allows Forrec to develop solutions that are suitable for all types of wood:
Presently, Medical Waste Processing has different ways, such as sanitary landfill, incineration by pyralysis, autoclave sterilization, chemical disinfection, microwave sterilization, thermal decomposition, and plasma process, ect. Harden Machinery has lots of experience in medical waste processing, we offer kinds of professional shredders to handle the processing. The medical waste can be shredded into uniform in size, which is smaller than 50mm to improve the incineration efficiency.
Harden’s Medical waste...
The growing demand for high-value, secondary raw materials renders targeted recycling increasingly attractive. Modern TOMRA Sorting technology generates clean non-ferrous metal fractions in customer shredder operations and results in valuable scrap metal gains.
Metal scrap processing requires slow speed shredders and hammer mills to densify scraps such as drums, door & window frames, white goods, and metal skeletons. Many metal recyclers around the world use HARDEN shredders to remove airspace, increase density, so as to reduce transportation costs and improve pricing. The shredding process also prepares materials for sorting, delacquering systems and furnaces. With our hardened knife tips design, HARDEN low speed shredders can be used to process ferrous metal,...
Shred-Tech®’s high torque Industrial Shredders can found in many of the world’s largest primary and secondary metal recycling and processing facilities. Shred-Tech®’s applications range from high volume magnesium sprue & runner reduction at over 60 TPH to one of the toughest applications known, the reduction of titanium plate and sheet stock. These slow speed shear shredders reduce shred materials such as baled aluminum, bailed radiators, ACSR cable, industrial, military and consumer...
Dismantled ELVs (End of Life Vehicles) are sold to shredder operators and are reduced to fist-size pieces by large rotating hammer mills. The Shredder Light Fraction (SLF) is removed from the stream by suction, the intensity of which determines the amount and composition of the SLF. SLF consists essentially of plastics/rubber (~60%), Glass/sand i.e. mineral substances (~15%), Textiles/leather/wood (~10%), Paint dust/rust (~10%) and Residual metals (~5%). Other names for SLF are ASR (Automobile Shredder Residue)...
Governments and manufacturers of electronic hardware are increasingly coming under pressure regarding the safe disposal of electronic waste once their useful life has been completed. End-of-life (EOL) legislation for e-scrap is in place in many countries and pending throughout Europe and North America. Shred-Tech® has engineered and manufactured custom systems to shred, separate and recover the component materials that make up these electronic products.
Many light and non-ferrous metal foundries are faced with the difficult hurdle of dealing with bulky waste consisting of punching burrs or rejects, which are a hindrance to optimal processing. Casting machines which involve the investment of many millions of euros cannot be used to their full capacity because production waste cannot be removed quickly enough. But it does not have to be that way!
Scrap metal includes metals that can be reclaimed for use in manufacturing, processed for re-melting or prepared for disposal in landfills. These metals include industrial scrap metal and remainders, electronic scrap, aluminum and precious metals. Shredders prepare the metals for bailing and bundling, saving storage space, transportation and disposal costs. Quad shaft shredders reduce and separate electronic scrap and prototypes in one process, allowing for the recovery of precious metals. Dual or quad shaft...
Non-Ferrous Metal Recycling is a large industry focusing on the recovery of metals such as aluminum, brass, copper, and even precious metals from electronic scrap. The applications and needs of non ferrous metal recyclers vary greatly. These can include a large corporate recycler buying UBC bales for shredding to be converted back into beverage cans or a small recycler who is recovering precious metals from circuit boards or catalytic converters.
Ferrous scrap metal includes metals that can be reclaimed for use through traditional ferrous scrap recovery systems. These metals include a wide variety of light ferrous scrap such as sheet steel, 55 gallon drums, white goods, and other forms of loose tin. Heavier ferrous scrap can be processed through the Saturn hammermill line of shredders which also produce a more consistent, higher density shred. Shredders prepare the metals for further separation or directly to end ferrous scrap consumers. Additional...
Ragger wires, also known as “pulper tails” and “pulper ropes”, are reject secondary raw materials that are created when waste paper is recycled. Ragger wires consists of the plastic trimmings, staples, tape, labels and baling wire found in baled post-consumer paper waste. It is made up of approximately 45% steel and 55% post consumer waste and must be removed from the pulper.
The widespread use of electronic products has created an enormous demand for the sorting of non-ferrous metals such as copper and aluminum. To be usable, these non-ferrous metal fractions must be treated to a high degree of purity. Thanks to TOMRA’s efficient sorting technology, separating these materials from metal waste makes is worthwhile in every aspect.
Harden Shredding Technology for Metal-processing IndustryMetal waste may be comes from the metal-processing industry, automotive industry, electronics industry, waste industry or commercial production, we will always offer you the right shredding system for recycling your valuable resources! The processing of scrap metal is strongly related to steelworks and, therefore, it becomes fundamental to deliver uniform material with a high specific weight.
Harden scrap metal shredders are perfect parallel to shearing...
Wood is a natural material which can be recycled to obtain new material that can be re-used for industrial purposes and for the production of renewable energy. The material obtained from recycling wood must undergo high-quality grinding to obtain a product that is pure and free from metals and other contaminants.
By Forrec srl
based in Santa Giustina in Colle, ITALY.
The shredding of metals is a very difficult process because, due to their very different characteristics, the metals, such as wire, steel pack binding, stamping waste, titanium sheets, zinc sprues, zinc casting waste, zinc oxide or magnetic bands, have very different requirements to the shredding machines. The Mercodor shredders are best suitable for the shredding of metals and metal composites of any kind and composition.
The processing of scrap metal is closely related to the steel industry. For this reason, it is essential to obtain a uniform output material with a high specific weight. Forrec`s metal scrap shredders use efficient shearing machines and hammer mills to achieve a reduction in volume, making the product shovelable. Processing focuses on safety, the wear and tear of the plant, and electricity consumption.
By Forrec srl
based in Santa Giustina in Colle, ITALY.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you