Recycling Equipment Applications

45 Results found
Only show results available in Virginia?
OK
  • Category: Waste & Recycling ×

  • Subcategory: Recycling Equipment ×

Waste Treatment for Green Waste

by MENART     based in Dour, BELGIUM

Green waste is organic waste collected after cleaning open green spaces, recreational zones, private gardens, greenhouses, sports fields, roads. Open-air burning, public rubbish/trash collection or incineration have numerous negative impacts and are often banned. Composting is therefore the most adapted treatment solution for green waste. Due to its specialisation in high-level equipment adapted to intensive use, Ménart equips composting platforms. Ménart’s machines are robust and easily serviced and offer total user satisfaction.

Evaporators technology for graphic arts, pulp & paper & textile industries

by EVALED - Veolia Water Technologies     based in Zoppola (PN), ITALY

Different industries with many different challenges to face. All of them have to find efficient and effective solutions to optimize the available resources for an ever more high competitiveness and, contextually, to comply with the most stringent regulations about the protection of the environment.

Recycling of Paper / Recycling of Cardboard

by eFACTOR3 LLC     based in Pineville, NORTH CAROLINA (USA)

The recycling of paper and cardboard often requires a shredding process to improve the pulping process or to put more weight into the bale. The M&J Shredder line is very effective for reducing the amount of fines in the shredded product. For small volume applications we also offer the WEIMA Single shaft shredder. In many cases these units are used in smaller paper recycling applications were the material is baled. The benefit of shredding before baling is an increased bale weight, and we also offer separation technology to separate contaminates from the paper stream.

Solutions for the waste sector

by DMT Global Environmental Solutions BV     based in Joure (NL), NETHERLANDS

There is an increasing global awareness that the waste problem needs to be solved in a sustainable way. New waste separation techniques are being implemented, and R&D programs focus on much more than waste-technology alone. The importance of biomass is recognized as a potential high-energy source for electricity and biogas. DMT’s ambitious approach is based on the principles of circular economy and cradle to cradle: waste products are in fact very valuable. We constantly investigate new ways in which to approach ‘waste’ from a different perspective, how to best use or reuse certain products, and where to create new markets and demands.

Recycling and processing of WEEE

by AD REM N.V. (Valtech Group)     based in Menen, BELGIUM

Next to processing shredder light and heavy shredder fraction the Ad Rem machinery is also capable of processing waste of electrical and electronic equipment. WEEE can be processed on the same machinery as ASR is processed without any modifications. This makes it possible to get more input into the system and therefore costing less per ton.

Recycling equipments for refrigerator recycling

by Eldan Recycling A/S     based in Faaborg, DENMARK

The Eldan refrigerator recycling plant is designed for processing refrigerators operating with CFC/pentane gasses in order to prevent harmful substances to evaporate into the atmosphere and to achieve the most efficient recycling of the solid materials. A complete refrigerator recycling system includes everything from pre-chopping to separation of the material.

Recycling Equipment for Municipal Solid Waste

by Bollegraaf Recycling Machinery BV     based in Appingedam, NETHERLANDS

Optimizing output in terms of economic value against the lowest possible costs per tonne. This is the short-term goal for every installation that Bollegraaf provides. The long-term goal is to ensure permanently low operatingcosts and achieve an optimal return on investment.

Metal Sorting - Non Ferrous Metals Sorting

by TOMRA Sorting (TITECH)     based in Mülheim-Kärlich, GERMANY

Modern sensor-based sorting systems are superior to traditional manual or sink-float processes for reasons including that they achieve material purities of up to 99.9% in refining the sorted fractions. TOMRA Sorting’s efficient sorting and recycling technology provides benefits for shredder machinery and heavy media operators, plus aluminum resmelters. Shredder operators can create individual fractions out of mixed product which yield much higher market values. Heavy media operators can produce and sell pure final products themselves, meaning their investment in technology is recouped quickly. After wet processing, the aluminum product still contains impurities and its concentration can be improved further using TITECH technology and sold for a considerably higher profit. For smelters, the TITECH x-tract [XRT] removes impurities in the secondary resource to such a high degree of precision that less primary resource is needed to obtain useful aluminum.

Recycling Equipment for Construction & Demolition Waste

by Bollegraaf Recycling Machinery BV     based in Appingedam, NETHERLANDS

Optimizing output in terms of economic value against the lowest possible costs per tonne. This is the short-term goal for every installation that Bollegraaf provides. The long-term goal is to ensure permanently low operating costs and achieve an optimal return on investment.

Recycling equipment for industrial paper & wood shredding

by Granutech-Saturn Systems     based in Grand Prairie, TEXAS (USA)

Our industrial paper shredders are designed to process paper, cardboard, and pulp waste. The shredded material is then used to manufacture new products, enabling manufacturers to efficiently recycle paper products. In addition, industrial paper shredders are used to ensure secure and total destruction of documents.

Recycling equipments for shredding hazardous waste

by Granutech-Saturn Systems     based in Grand Prairie, TEXAS (USA)

The disposal of hazardous waste requires special handling to ensure that safety and regulatory requirements are met. Preparing the waste for incineration or burial requires equipment that is durable and reliable so that the materials are processed safely and in accordance with the regulatory requirements.

Recycling equipments for non-ferrous scrap metal shredding & recycling

by Granutech-Saturn Systems     based in Grand Prairie, TEXAS (USA)

Non-Ferrous Metal Recycling is a large industry focusing on the recovery of metals such as aluminum, brass, copper, and even precious metals from electronic scrap. The applications and needs of non ferrous metal recyclers vary greatly. These can include a large corporate recycler buying UBC bales for shredding to be converted back into beverage cans or a small recycler who is recovering precious metals from circuit boards or catalytic converters.

Reliable Shredding Technology for Metal-processing Industry

by UNTHA Shredding Technology     based in Kuchl, AUSTRIA

Regardless of whether your metal waste comes from the metal-processing industry, automotive industry, electronics industry, waste industry or commercial production, we will always offer you the right shredding system for recycling your valuable resources! Metals are important raw materials for the industry and can be repeatedly returned to the recovered resource cycle with very little loss. The recycling of metals saves valuable raw materials and energy as opposed to the new processing of ores.  Our sturdy rotary shears that have been tried and tested a thousand times over, reliably and efficiently shred light metals such as aluminium, magnesium, Al-Mg alloys, copper or nickel, as well as harder metals such as iron, zirconium, titanium and sheet steel.

Classification and identification of recyclable material

by Bruker Corporation     based in Billerica, MASSACHUSETTS (USA)

This level is expected to reach over 4 million tons by 2010. Companies that specialize in recycling carpet require a fast, reliable and accurate means of identifying the carpet face fiber type entering recycling streams. Collection of plastics for recycling is increasing rapidly. Plastic recycling faces one huge problem, plastic types must not be mixed for recycling. Even a small amount of the wrong type of plastic can ruin the melt. Whether it is a carpet or plastic, classification and identification of recyclable material can be achieved using Bruker Optics` state of the art spectrometer systems. Bruker Optics has applied the FT-NIR technology and experience to this demanding requirement, and offers the Carpet Analyzer as a dedicated solution for the recycling industry.

Solid Waste Collection

by JLM Equipment     based in Lake Wales, FLORIDA (USA)

We provide equipment for municipal solid waste collection. Including but not limited to commercial front loaders, automated side loaders, rear loaders, recycling trucks, grapple trucks, Dump Loc body supports, and X1R lubricators for the solid waste industry, recycling and bulky waste collection.

Complete solutions for the recycling industry

by Macpresse Europa S.R.L     based in Vernate, ITALY

For over 40 years, Macpresse designs and manufactures complete solutions for the recycling industry. From individual technologies, i.e. balers, shredders etc. right up to complete sorting plants and Material Recovery Faclities.

Recycling Equipment for Confidential Shredding Industry

by Bollegraaf Recycling Machinery BV     based in Appingedam, NETHERLANDS

Confidential Archive Shredding Solutions; Optimizing output in terms of economic value against the lowest possible costs per tonne. This is the short-term goal for ervery installation that Bollegraaf provides. The long-term goal is to ensure permanently low operating costs and achieve an optimal return on investment. Significant savings can be achieved at many offices by freeing up valuable office space that is occupied by filling cabinets or boxes full of documents. However, when it comes to classified and confidential documents, out of sight doesn`t necessarily mean out of mind. That`s why at Bollegraaf we invest a lot of time into offering products and installations that meet the required legal standards for the destruction of such confidentail documents. The result of this effort: your peace of mind.

Recycling Equipment for Waste to Energy

by Bollegraaf Recycling Machinery BV     based in Appingedam, NETHERLANDS

Create high-value RDF with MSW and C&I waste; Optimising the output in terms of economic value and against the lowest possible costs per tonne is the short-term goal for every single system that Bollegraaf provides. The benefits: permanently low operating cost and lowest cost per tonne. The result: fast return on investment.

Recycling Equipment for Plastic Waste

by Bollegraaf Recycling Machinery BV     based in Appingedam, NETHERLANDS

Optimizing output in terms of economic value against the lowest possible costs per tonne. This is the short-term goal for every installation that Bollegraaf provides. The long-term goal is to ensure permanently low operating costs and achieve an optimal return on investment.

Need help finding the right suppliers?

Let the XPRTs do the work for you