Solid Waste Applications

27 Results found
Only show results available in Virginia?
OK
  • Category: Waste & Recycling ×

  • Subcategory: Solid Waste ×

Odor control solutions for solid waste industry

by Ecolo Odor Control Technologies     based in Toronto, ONTARIO (CANADA)

Today in modern society we generate waste and and we generate it in vast quantities. Professionals around the world are dedicated to processing this material as efficiently as possible. Efficient processes and higher population density increase the risk of affecting the quality of life of workers, neighboring communities and the overall population.

Refuse Derived Fuel (RDF) & Solid Recovered Fuel (SRF)

by Advanced Plasma Power (APP)     based in Swindon, UNITED KINGDOM

A full-scale Gasplasma® plant can make its own RDF from MSW/Commercial Waste. The waste is brought directly into a fuel preparation hall at the front of the building. Inside the fuel preparation hall there is industry standard equipment that can recover glass, metals and hard plastics from the wastes for recycling. The remaining waste is then dried and shredded to make a Refuse Derived Fuel (RDF) for the Gasplasma® energy from waste process. Clients who already produce RDF may not require a fuel preparation hall. APP can design a plant without this facility, accepting the RDF directly from the client. Secondary Recovered Fuel or Solid Recovered Fuel (SRF) is often confused with Refuse Derived Fuel because they are similar in nature. However, SRF is produced to reach a clearly defined standard such as CEN/343 ANAS whereas RDF is not.

Energy and Fuels from Commercial Waste

by Advanced Plasma Power (APP)     based in Swindon, UNITED KINGDOM

Commercial Waste is similar to Municipal Solid Waste although it tends to have more biodegradable products. Commercial waste is defined as all wastes created by commercial businesses. This can include, but is not necessarily limited to, solid or liquid wastes originating from offices, stores, markets, restaurants, shopping centres and other enterprises. We receive Commercial waste into the Materials Recycling Facility (MRF) at the front end of the Gasplasma® energy from waste plant. Any recyclable materials are recovered and the remainder is dried and shredded to make Refuse Derived Fuel (RDF). The RDF is used as fuel in the Gasplasma® plant to generate clean, renewable power and heat.

Recycling equipments for refrigerator recycling

by Eldan Recycling A/S     based in Faaborg, DENMARK

The Eldan refrigerator recycling plant is designed for processing refrigerators operating with CFC/pentane gasses in order to prevent harmful substances to evaporate into the atmosphere and to achieve the most efficient recycling of the solid materials. A complete refrigerator recycling system includes everything from pre-chopping to separation of the material.

Industrial Weighing - Tank/Vessel/Hopper Weighing

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

Liquids, powders, solids, and gases are captured, stored, and processed in many different types of vessels, tanks, hoppers, and unique containers. Whether managing inventory, ensuring product consistency, or eliminating waste, there are numerous requirements for integrating weighing into these structures.

Odor Control for Municipal Waste

by OMI Industries (OMI)     based in Long Grove, ILLINOIS (USA)

Eliminating Industrial Odors Naturally Is Our Civic Duty

To handle the odor control needs of municipal and government agencies, OMI Industries has created MUNI® odor neutralizing product. Similar in many ways to its siblings in the Ecosorb® products line, Muni odor control product uses Van Der Waals forces to chemically react with malodor molecules to eliminate odors combined with a natural formulation that makes it safe to work with. What’s more, the Muni® product is surprisingly economical to use. It was specially developed to meet the tight budget limitations faced by municipalities without skimping on industrial odor control effectiveness.

Removal of Non-Ferrous Metals in the Recycling Industry

by Eriez Magnetics Europe Ltd     based in Bedwas, UNITED KINGDOM

Non magnetic metals such aluminum + copper can be separated using eriez eddy current separators or meta sorters. Eriez equipment, either as individual units or complete systems, is designed for efficient + economical processing of municipal solid waste, co-mingled recyclables, shredded automobiles, Electronic Scrap, Glass Cullet, Plastic (PET), foundry sand and many other resource recovery options.

Industrial shredders for CIW/MSW/BW/HW industry

by PRECIMECA Environnement     based in Toulouse, FRANCE

CIW : Common Industrial Waste, MSW : Municipal Solid Waste, BW : Bulky Waste, HW : Hazardous Waste. All the dies of valorization/recycling of the CIW/HW start with a primary step of shredding. Since shredder 50-02 to the 12-02, according to the type of waste to be shredded, flow and required granulometry, Préciméca offers the machine adapted to your needs. Possibility of turn-key installation (handling, shredder, clasifier, magnetic seperation, etc.) or supply of single shredder, consult us!

Solid Waste Collection

by JLM Equipment     based in Lake Wales, FLORIDA (USA)

We provide equipment for municipal solid waste collection. Including but not limited to commercial front loaders, automated side loaders, rear loaders, recycling trucks, grapple trucks, Dump Loc body supports, and X1R lubricators for the solid waste industry, recycling and bulky waste collection.

Waste management for hotels and resorts

by Terragon Environmental Technologies Inc.     based in Montréal, QUEBEC (CANADA)

Yet, while the people living in today’s wealthy societies can easily escape their every day life and enter the pristine world of unspoiled nature, they cannot escape their propensity for generating garbage. On average, a person generates about half a kilogram of solid waste plus approximately 300 liters of wastewater per day. Tourists frequently generate more waste than the average. Thus, a resort that hosts about 300 guests and staff will generate over 50 tonnes of solid waste and 30,000 tonnes of wastewater per year. Where does a resort located far away from any conventional waste treatment facility dispose of all this waste?

Solid waste management @ source:

by EcoCare Technologies     based in Chennai, INDIA

Any industry that is producing a food waste that can be handled and disposed / treated in our system safely, conveniently, and hygienically.

Positive displacement pumps for water and waste industry

by Watson-Marlow Fluid Technology Group     based in Falmouth, UNITED KINGDOM

Watson-Marlow peristaltic pumps` simple, glandless, `straight-through` design, with no valves, vanes or impellers have clear advantages when handling viscous sludge with high-solid content.

Recycling equipments for shredding solid waste & municipal solid waste

by Granutech-Saturn Systems     based in Grand Prairie, TEXAS (USA)

Solid waste and municipal solid waste (MSW) size reduction requires processing of many different materials, from filled drums to household waste. And, as the amount of solid waste increases and the cost of landfill management increases, it is becoming more critical that waste management become more effective, economic and efficient. Shredded and compacted waste is easier and cheaper to transport and extends the life of the landfill. In addition, separating out materials that can be reclaimed and recycled or that need to be incinerated or composted increases the landfill productivity while providing revenue to offset the costs of processing the solid waste.

Shredders for Industrial and Urban Waste Treatment

by SA Eng Soluzioni per l`Ambiente     based in San Donà di Piave, ITALY

One of the most active field in the last years is that related to the Municipal Solid Waste treatment.

Recycling equipments for municipal solid waste (MSW) recycling

by Eldan Recycling A/S     based in Faaborg, DENMARK

During recent year it has become increasingly evident that an alternative energy sources has to be explored. RDF (Residual Derived Fuel) uses the energy content of the traditional household waste in order to substitute fuel. The production of RDF is the optimum solution both environmentally and economically. To optimize the process, it is important to reduce the waste volume into a homogeneous fraction size of e.g.

Gas Sensing for Gasification

by Edinburgh Instruments Ltd     based in Livingston, UNITED KINGDOM

Syngas (short for synthetic gas) can be burnt and used as a fuel source, the main constituents of syngas are Carbon Monoxide (CO) and Hydrogen (H), which amount for around 85% of Syngas, and it is produced by a process called Gasification. Gasification starts with a base material which can originate from a wide variety of materials for example wood chips and pellets, plastics, municipal solid waste, sewage, waste crops, and fossil fuels such as coal. During Gasification the base material is reacted at high temperature without combustion with controlled amounts of oxygen (O) or steam. The composition of the base material combined with the amount of oxygen and heat used in the process affects the composition of the resultant SynGas, in which the CO can vary between around 20 and 60%. In addition, large amounts of H and CO are also formed. The measurement of CO is therefore an important feature in the production of SynGas.

Landfill lining

by CETCO     based in Hoffman Estates, ILLINOIS (USA)

GCLs have become the gold standard clay component of composite lining systems used in industrial, hazardous and municipal solid waste landfills. Used alone or in combination with a geomembrane in a composite cover system, GCLs provide significantly lower permeability, improved ease of installation, an increased amount of usable space. In many cases GCLs are more cost-effective than traditional compacted clay liners. GCLs are also not subject to deterioration from differential settlement and freeze-thaw cycles, which can damage traditional compacted clay liners. Important design considerations for GCLs in landfill caps include confining pressure, and potential for ion exchange and desiccation.

Biomass collection for the municipal solid waste industry

by Vermeer     based in Pella, IOWA (USA)

Vermeer is helping municipalities take advantage of the new and emerging opportunities in biomass collection. Biomass is defined as any organic material made from plants or animals and includes items such as urban wood waste, forestry residues, perennial grass crops, agricultural residues and municipal solid wastes.

Need help finding the right suppliers?

Let the XPRTs do the work for you