Only show results available in Virginia? Ok

Swarf Recycling equipment for Waste and Recycling

  • Premium

    VacuDry - Oil and Metal Recovery from Grinding Swarf

    A combination of rising prices for resources and the improvement in technology make treatment of mill scale and grinding swarf an extremely environmentally friendly and economical solution. The first VacuDry® plant for the recovery of oil solvents and metals from sludges began operating in autumn 2012.

    By econ industries services GmbH based in Starnberg, GERMANY. from Oil and Metal Recovery from Grinding Swarf Product line

  • Premium

    Erdwich - Systems for Metal Swarf Recycling

    Swarf shredder: Centralised and decentralised solutions for metal swarf shredding. Swarf is unavoidable in stock removal processes, but intelligent chip treatment can lead to significant cost savings and increase process reliability. Erdwich chip shredders are the right tools for this purpose. They reduce chip volume and remove residues of cutting ...

    By Erdwich Zerkleinerungssysteme GmbH based in Igling, GERMANY. from Systems for Metal Swarf Recycling Product line

  • Drag or Scraper Conveyors

    The DRAG or SCRAPER EVACUATORS are used for the transport of small or dusty swarf as for example, from milling or grinding brass, cast iron or steel. The transport occurs through flights that push the swarf by scraping the bottom of the conveyor and that are moved by a double side chain on rollers.

    By Govoni Handling Systems Srl based in Cento (FE), ITALY.

  • Model W 192 - Wet and Swarf Cleaner

    The wet and swarf cleaners of Kiekens Products are eminent quality products with a very long life. The economically constructed cleaners are characterized by a strong suction power with a low noise level. In that way they contribute to dust free and safe working conditions.

    By Kiekens Products B.V. based in Linschoten, NETHERLANDS. from Wet and Swarf Cleaner Product line

  • Bonfiglio - Model Vortice Type - Vortice Manually-Loaded Centrifuges Machines

    Removable-basket manual centrifuges, with manual loading and unloading. Strong and useful machines, suitable for small material batches.

    By Bonfiglio Srl based in Basiano (Milano), ITALY. from Vortice Manually-Loaded Centrifuges Machines Product line

  • Bonfiglio - Model SCPC - Continuous Centrifuges

    They are continuous-flowing centrifuges, that load and unload the material without stopping or speed changings. Suitable for minced material, such as swarf / chips.

    By Bonfiglio Srl based in Basiano (Milano), ITALY. from Continuous Centrifuges Product line

  • Shredder

    Long and bushy swarf is broken up  at a low rotating speed continuesly by the horizantal swarf shredder. Available for  the carbon steel, stainless steel, aluminium alloys, titanium, 1200 N/mm2  and higher tensile stregth alloys and easily mounted before swarf briquetting press and chip wringer. Swarf is fed  through the upside ...

    By Gökmasan Ltd. based in Nilüfer, TURKEY. from Shredder Product line

  • Steel Belt Swarf Conveyor

    Long and curly chips, swarf bundles of alüminium ,steel or other metarials can be transferred to silo or to the next machine in the swarf handling system. Steel belt conveyors are designed in order to ensure the maximum product cycle and minimum service requirement.

    By Gökmasan Ltd. based in Nilüfer, TURKEY. from Steel Belt Swarf Conveyor Product line

  • Model GRU-60 to GRU-3000 - Grinding Oil-/ Metal Swarf Recycling Units

    Do you want to recover your precious metal and cooling lubricant feedstock? - We offer the solution: The solvent extraction units of the GRU series have been designed for the de-oiling of metal swarfs. With this units metal swarfs can be de-oiled up to a residual oil content of 0,01%. First, the grinding oil mixture is flooded with solvent. Then, ...

    By DesbaTec Anlagentechnik GmbH based in Sulzbach am Main, GERMANY. from Grinding Oil-/ Metal Swarf Recycling Units Product line

  • Freddy - Model KSV45 - Swarf Vacuum

    The Freddy KSV vacuum is a portable vacuum designed to pick up swarf.  The KSV/W is designed to pick up engineering coolant (suds), metal chippings and swarf (but not spirals). The KSV/C is designed to pick up metal chippings and swarf (but not spirals) where there is little or no liquid present. The KSV/W has a perforated steel basket with a ...

    By Freddy Products Ltd based in Pershore, UNITED KINGDOM. from Swarf Vacuum Product line

  • BFS - Model BFS - Sweeper Brush/Broom

    Save time and money. Improve Health & Safety. Exceptional value for money. Long lasting, replaceable, quick change bristle rows. Highly durable for sweeping bulky debris, dust, swarf, leaves, slurry, water, soil, aggregate, sawdust, shavings etc. BFS Standard Duty have fork tip pockets, 5 bristle rows, 4 or 5 feet wide. BFM Medium Duty chain ...

    By BFS Forks & Attachments based in Oldbury, UNITED KINGDOM. from Sweeper Brush/Broom Product line

  • Metal Swarf De-Oiling System

    With LÖMI systems, metal swarf can be de-oiled down to < 0,1 percent by weight of lipophilic substances, depending on the degree of pollution and particle size of the metal swarf. urthermore, all cooling lubricants based on oils and esters – native lubricants as well – can be recovered. We provide you with systems of 50 to ...

    By LÖMI GmbH based in Grossostheim, GERMANY. from Metal Swarf De-Oiling System Product line

  • Tungsten Carbide Soft Scraps

    Tungco Powder Procurement (TPP) specializes in Tungsten Carbide Sludge, also known as Tungsten Carbide Swarf or Tungsten Carbide Soft Scrap. With Tungsten Carbide Sludge, knowing your Tungsten content is paramount. So, we strive to provide our suppliers with a prompt, accurate analysis.  No percentage of Tungsten Carbide Sludge will be to ...

    By Tungco Inc. based in Madisonville,, KENTUCKY (USA).

  • PRAB - Candle Filter - 1 Micron Filtration

    Engineered for oil filtration in EDM, tungsten carbide tool grinding, honing machine, and bearing grinding applications. Membrane wafers capture grinding swarf at 1 micron. Automatic air pressure back flush cycle reduces labor costs and increases process efficiency. Swarf is purged into and external receptacle for easy collection and recycling.

    By PRAB, Inc based in Kalamazoo, MICHIGAN (USA). from Candle Filter - 1 Micron Filtration Product line

  • Model KW1000/2000/3000/400 - Wet and Swarf Cleaners

    The wet and swarf cleaners of Kiekens Products are eminent quality products with a very long life. The economically constructed cleaners are characterized by a strong suction power with a low noise level. In that way they contibute to dust free and safe working conditions.

    By Kiekens Products B.V. based in Linschoten, NETHERLANDS. from Wet and Swarf Cleaners Product line

  • Model GMS - Chip Wringer / Centrifuge

    Chip Wringer separates the any kind of swarf  formed in metal removing processes through a sheet metal filter from the oil.These oil on the swarf made it contamined(dangerous waste). After centrifuge process the oil percentage is %1-4 and swarf is not contamined. Horizantal,vertical ,45 degree mounted;pnomatic  and gravital output  ...

    By Gökmasan Ltd. based in Nilüfer, TURKEY. from Chip Wringer / Centrifuge Product line

  • Vertical Axis Swarf Crusher

    Long and bushy swarf is broken up  at a low rotating speed continuesly by the vertical swarf crusher. Available for  the carbon steel,stainless steel,aluminium alloys,titanium ,1200 N/mm2  and higher tensile stregth alloys and easily mounted before swarf briquetting press and chip wringer.

    By Gökmasan Ltd. based in Nilüfer, TURKEY. from Vertical Axis Swarf Crusher Product line

  • Fork Mounted Magnet

    A 1250 mm wide permanent magnet (no power source required), clamps onto tips of forks. Designed to be used at approx. 75 mm off the ground to collect magnetic items such as swarf, nuts, nails, washers, bolts etc. Typical applications include: paths, yards, workshops, car parks, loading bays. Wider versions available to order. Fork pockets are set ...

    By BFS Forks & Attachments based in Oldbury, UNITED KINGDOM. from Fork Mounted Magnet Product line

  • Lid Top Waste Balers

    Stembridge have been supplying 3-Ram, Lid Top baling Machines since 2008. The most popular being the SMR-Y81F-125A machine. The main cylinder (3rd compression) has a 125 Ton pressing force, making it just as powerful, if not more than its competitors. The baling chamber is 1200 x 700 x 600 which in many instances is bigger than its competitors. ...

    By Stembridge Machinery Sales & Rentals Limited based in Sheffield, UNITED KINGDOM.

  • Bar End Separator

    Bar ends, any kind of tramp materials, cutting tools  in the swarf after metal removing processes are separated through bar end separator. Aim is to prevent the harm of the cutting tools in a crusher  or unbalance of the  centrifuge. Bar end separators can be manufactured in accordance with the process requirements  in very ...

    By Gökmasan Ltd. based in Nilüfer, TURKEY. from Bar End Separator Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you