Waste and Recycling Vehicles Applications

8 Results found
Only show results available in Virginia?
OK
  • Category: Waste & Recycling ×

  • Subcategory: Waste and Recycling Vehicles ×

Tire shredding

by SSI Shredding Systems, Inc.     based in Wilsonville, OREGON (USA)

SSI offers a wide variety of solutions for people who want to process tires for cars, trucks, aircraft, agricultural and OTR/Mining tires. Our focus has been to develop reliable, robust and easy-to-work-on equipment that will reduce whole tires down to chunks ranging in size from long “strips” to 1` or 2` (25-50mm) chips. We have systems that can process tires at rates ranging from 2 tons (200 car tires) to over 30 tons (3,000 car tires) per hour. Tires do not need to be debeaded in order to be shredded in our equipment.

Hydrocyclones for automotive applications

by FLSmidth KREBS     based in Tucson, ARIZONA (USA)

Krebs cyclones are used in automotive and large vehicle plants. Krebs cyclones improve the cleaning process prior to painting by separating the paint weld balls, metallic particles, oils, grease and phosphate sludge from the cleaning solution.

Solid Waste Collection

by JLM Equipment     based in Lake Wales, FLORIDA (USA)

We provide equipment for municipal solid waste collection. Including but not limited to commercial front loaders, automated side loaders, rear loaders, recycling trucks, grapple trucks, Dump Loc body supports, and X1R lubricators for the solid waste industry, recycling and bulky waste collection.

Shredders for Tires and Rubber Treatment

by SA Eng Soluzioni per l`Ambiente     based in San Donà di Piave, ITALY

By the activity of tires recycling are obtained rubber granuls and rubber powder. Through the shredding and granulating, the rubber waste is reduced to the appropriate size to allow the re-use.

Shredders for Industrial and Urban Waste Treatment

by SA Eng Soluzioni per l`Ambiente     based in San Donà di Piave, ITALY

One of the most active field in the last years is that related to the Municipal Solid Waste treatment.

Metal Sorting - End of Life Vehicles Scrap Sorting

by TOMRA Sorting (TITECH)     based in Mülheim-Kärlich, GERMANY

Using modern TOMRA sorting technology you can generate clean non-ferrous metal fractions in your daily shredder operation. The processing of valuable scrap metal gains more and more importance worldwide. The aim is to generate clean, mono-fraction products from this very complex stream of End of Life Vehicles scrap metal material using suitable separation procedures. And that is worthwhile; End of Life Vehicles scrap processing does not only preserve natural resources of raw material, but it is also considerably cheaper. Compared to the aluminium production from primary raw material, using secondary material from End of Life Vehicles saves around 90% of the energy demand.

Electric bin lifts for refuse collection vehicles

by EcoNord Ltd     based in Reykjavik, ICELAND

EcoNord specialises in the design, production and sales of environmental friendly equipment and data systems for the waste management industry.

Industrial air pollution control for the automotive and vehicle engineering

by Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control     based in Graz, AUSTRIA

Increased mobility and the soaring worldwide demand for cars have opened up questions regarding sustainability and environmental protection. Hazardous exhaust gases are emitted not only when driving vehicles, but also during their production. The waste gas volumes in the automotive industry reach up to 200,000 Nm³/h.

Need help finding the right suppliers?

Let the XPRTs do the work for you