Only show results in Connecticut? Ok

Waste Recovery Applications

  • Premium

    Machineries for product destruction & recovery

    Complete Turnkey Systems, custom designed and manufactured by Shred-Tech®, destroy, recover and separate a wide variety of off-spec, mis-packaged and out-dated products. Shred-Tech®’s Material Separation and Recovery / Destruction Systems are used around the world for recovering precious metals from computers and telecommunications scrap, nylon from carpet, and recyclables from MSW, just to name a few. Mis-packaged consumer products such as breakfast cereals, cosmetics, milk and juice containers,...

    By Shred-Tech Corp. based in Cambridge, ONTARIO (CANADA).

  • Premium

    Plastic sorting for the plastics industry

    REDWAVE is a flexible system with applications in a variety of fields, especially for the plastics industry. No matter how complex the sorting task may be the REDWAVE range of sorting equipment can achieve high levels of purity. REDWAVE guarantees high waste throughput with effective recovery of required materials, achieving maximum return on the separated commodities.

    By REDWAVE - a division of BT-Wolfgang Binder GmbH based in Eggersdorf bei Graz, AUSTRIA.

  • Premium

    Evaporators and concentrators for food & beverage

    Purification of waste water washing lines, recovery and concentration of sugar solutions, recovery of concentrates for resale, reuse of process water for industrial uses.

    By Eco-Techno SRL. based in Busnago MB, ITALY.

  • Premium

    Special plants for recycling of electronic waste (WEEE)

    Proper disposal of electronic waste (WEEE) and of waste in the R4 category, i.e. waste such as electrical and electronic equipment, allows the recovery of a large number of precious metals and components.

    By Forrec srl based in Santa Giustina in Colle, ITALY.

  • Premium

    Anaerobic water purification systems for metal removal/recovery

    Many industries are aware of the opportunities to recover valuable resources from process and bleed streams. This combines creating revenues from waste streams with environmental sustainability. Even low concentrations of dissolved base metals can be economically recovered.

    By Paques Technology B.V. based in EL Balk, NETHERLANDS.

  • Premium

    Environmental solutions for the composites & carbon fiber industry

    Custom or hybrid styles and designs to fit your needs. Dürr Megtec provides roll-to-roll drying, curing and thermal air-handling systems for coating and laminating applications, such as composites, carbon fiber and thermoplastics. Whether you need a small, value-priced roll-support dryer, a custom-configured air flotation dryer or a complete coating line for a specialized application, Dürr Megtec has the products and services to meet your requirements. Our technical application and design engineers work...

    By Dürr Systems, Inc. based in De Pere, WISCONSIN (USA).

  • Flotation-Filtration System for Refining

    akvoFloat™ can handle any refinery effluent –regardless of the oil and TSS concentration– as a one-stop pretreatment solution for the biological treatment, acting as a reliable absolute barrier. Unlike conventional technologies, akvoFloat™ can remove dispersed and emulsified oils.

    By akvola Technologies GmbH based in Berlin, GERMANY.

  • Waste water recovery solutions for large scale wash areas sector

    Custom solution for large vehicle wash areas.

    By GEOMAT Patented Waste Water Recovery System based in Tampa, FLORIDA (USA).

  • Stack Testing for VOC Recovery Afterburner Installation

    HAZARDOUS WASTE HANDLING INDUSTRY: Conducted on-site GC speciation of VOC constituents by Method 18 collecting samples continuously around-the-clock in large vacuum canisters in order to demonstrate compliance control of a VOC recovery/afterburner installation

    By AirSource Technologies, Inc. based in Shawnee, KANSAS (USA).

  • Solutions for recovering metals

    The mining industry relies on Calgon Carbon’s Granular Activated Carbon (GAC) to recover gold and other precious metals. Calgon Carbon’s ISEP® Technology is used to recover precious, rare earth and base metals, uranium, copper, nickel and zinc from ore, waste and reclaim streams. Our high-quality activated carbons have been developed and successfully proven to maximize efficiency by reducing the loss of precious metals and the consumption of carbon in three precious metal extraction techniques: Carbon-in-Leach...

    By Calgon Carbon Corporation based in Moon Township, PENNSYLVANIA (USA).

  • Waste recovery for nuclear wastes

    Nuclear waste is divided into low, medium, and high‐level waste by the amount of radiological character it contains. Low and Intermediate Level Nuclear waste is the radioactive waste resulting from nuclear facility consumables, clothing, laboratory equipment etc. This waste can adversely affect human health and the environment and therefore must be handled appropriately. Typically, the waste is kept underwater for 3-5 years until the radiation decays to levels that can be shielded by concrete in large...

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

  • Waste Management Solutions for Metal Refining

    Metal refining is increasingly seen as an essential part of natural resource conservation As sources of primary metals become scarcer or harder to excavate, the only viable solution is to extract and recycle secondary source of material already in circulation in a number of mass produced consumer products across the globe. The challenge is finding a technology that can efficiently recover these valuable metals from their less valuable materials. Tetronics can assist with a range of metal refining challenges,...

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

  • Material handling equipment for utilities industry

    Electric Power Generation, Fossil Fuel Electric Power Generation, Biomass, Alternative Fuels, Sewage Treatment Facilities, Waste Management and Remediation Services, Waste Treatment and Disposal, Solid Waste Combustors and Incinerators, Remediation Services, Materials Recovery, Facilities Waste Treatment and Disposal, Solid Waste Combustors and Incinerators, Remediation Services.

    By TerraSource Global based in St. Louis, MISSOURI (USA).

  • Waste recovery for energy & utilities

    In order to stay competitive and to be seen as being environmentally responsible, energy and utility companies are always looking for alternative routes to generate power. One method of doing this is by leveraging waste to energy incineration plants linked to the processing municipal solid waste. During this incineration process, APC residues, which are a mixture of fly ash, organic pollutants (including dioxins and furans), are generated and are classified as hazardous waste and have a detrimental environmental...

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

  • Oxygen VPSA Onsite Generator fo rChemicals and Petrochemicals

    Oxygen is used directly as a process gas as a reactant or indirectly to enrich the oxygen level of other streams for the purpose of debottlenecking, reducing emissions and expanding operating flexibility. Oxidation processes include ethylene oxide, titanium dioxide, propylene oxide, vinyl chloride monomer and vinyl acetate. Refinery uses include sulpher recovery, catalyst regeneration, waste destruction and catalytic cracking regenerator capacity increase.

    By Adsorptech based in Middlesex, NEW JERSEY (USA).

  • Applications and Air Pollutants Removed in the Pulp and Paper Industry

    Equipment and systems for Kraft and Sulfite mills. Control chlorine and chlorine dioxide emissions from bleaching operations. Brown stock washer emissions. Control particulate emissions from lime kilns, lime slakers, black liquor recovery boilers, furnaces and gasification units. Particulate from bark and sludge boilers and sulfur dioxide and trioxide removal from those sources. Control of hydrogen sulfide, TRS and methanol emissions from LVHC and HVLC gas streams. Complete fugitive lime dust collection systems...

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you