Only show results in Virginia? Ok

Waste Streams Applications

  • Recycling of Paper / Recycling of Cardboard

    The recycling of paper and cardboard often requires a shredding process to improve the pulping process or to put more weight into the bale. The M&J Shredder line is very effective for reducing the amount of fines in the shredded product. For small volume applications we also offer the WEIMA Single shaft shredder. In many cases these units are used in smaller paper recycling applications were the material is baled. The benefit of shredding before baling is an increased bale weight, and we also offer separation technology to separate contaminates from the paper stream.

    By eFACTOR3 LLC based in Pineville, NORTH CAROLINA (USA).

  • Premium

    Water quality monitoring for semiconductor industry

    Water is fundamental to the manufacturing process in a semiconductor facility. Electronic components are rinsed or washed several times during the producing process with ultrapure water (UPW) to remove residue. Continuous monitoring of organic constituents (TOC) on the influent city water assist with UPW production. Good quality waste streams for the manufacturing process can also be monitored for reuse potential.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Premium

    Water quality monitoring for pulp & paper industry

    Pulp and paper waste streams are exceptionally well suited for spectral analysis due to the high concentration of UV/Vis light absorbing organics in their process water and waste streams. Continuous monitoring of the organic load by means of COD/BOD correlations will help ensure the treatment process is carried out in the most efficient way possible by optimizing aeration rates and nutrient dosing while also making sure that all the regulatory goals are met.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Premium

    Applications and Air Pollutants Removed in the Metallurgical and Metal Finishing Industries

    From Aluminum to Zinc in the Metals Industry, Bionomic offers field proven extensive line of equipment and systems for; capturing acid gases, ammonia and alkaline mists from metal cleaning, treatment, etching and finishing operations including chemical milling. Acid and NOx emissions from pickling, anodizing, chemical milling and precious metals dissolving operations. Systems for HCL recovery from pickling lines, special scrubbing equipment and chemistries for NOx removal. Zinc galvanizing and electrogalvanizing line emissions. Removal of fine metallic particulate including tars from smelters and sinter plants as well as particulate emissions from blast, reverberatory and other furnaces. 

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Biological wastewater processes for chemical & pharmaceutical

    This waste stream can have complex characteristics: Biocides, heavy metals, pharmaceutical intermediates and endocrine disruptors. We are familiar and know how to marry appropriate treatment to make sure you are compliant.

    By Biowater Technology based in Cumberland, RHODE ISLAND (USA).

  • Recycling Equipment for Single Stream Waste

    Optimising output in terms of economic value and against the lowest possible costs per tonne. This is the short-term goal for every Single Stream installation that we provide in cooperation with Bollegraaf. The long-term goal is to ensure permanently low operating costs. The result: fast Return on Investment.

    By Bollegraaf Recycling Solutions based in Appingedam, NETHERLANDS.

  • Classification and identification of recyclable material

    This level is expected to reach over 4 million tons by 2010. Companies that specialize in recycling carpet require a fast, reliable and accurate means of identifying the carpet face fiber type entering recycling streams. Collection of plastics for recycling is increasing rapidly. Plastic recycling faces one huge problem, plastic types must not be mixed for recycling. Even a small amount of the wrong type of plastic can ruin the melt. Whether it is a carpet or plastic, classification and identification of recyclable material can be achieved using Bruker Optics` state of the art spectrometer systems. Bruker Optics has applied the FT-NIR technology and experience to this demanding requirement, and offers the Carpet Analyzer as a dedicated solution for the recycling industry.

    By Bruker Corporation based in Billerica, MASSACHUSETTS (USA).

  • Waste water respirometry solutions for toxicity tracking

    If toxicity is identified in a mixed sewage entering a treatment works, the problem for the plant manager is to track and identify the source of the toxicity. This can be done by sampling the effluent stream at various points in its length. By working in a logical sequence back up the sewer network the number of samples can be minimised. This type of testing should be rigorously enforced for new product introduction by a waste producer, as well as sampling the effluents directly at source. The samples would be tested against the activated sludge of the receiving works, using the Respiration Inhibition Test or the Nitrification Inhibition Test.

    By Strathkelvin Instruments Ltd. based in North Lanarkshire, UNITED KINGDOM.

  • Premium

    Biological waste water treatment plants solutions for bio ethanol distilleries

    The waste (water) streams from the production of (bio) ethanol or ethanol spirits are generally very suitable for anaerobic treatment, due to their organic compounds.

    By HydroThane STP BV based in KC `s Hertogenbosch, NETHERLANDS.

  • Filtration systems & solutions for nuclear industry

    Within the nuclear industry there are ongoing operational challenges and potential hazards associated with environmental emissions and the protection of the workforce, such as high temperatures, high radioactivity, high solids loads and chemically aggressive environments. Therefore the industry demands exceptional levels of technical expertise and quality, in conjunction with specific skills to solve many of its most intractable problems.

    By Porvair Filtration Group based in Fareham, UNITED KINGDOM.

  • Spent coolant wastewater solution

    Waste coolant or spent coolant wastewater is one of the more common applications for ENCON Wastewater Evaporators. The most common type of coolant is made up of water-soluble oils, but water-soluble synthetics or semi- synthetics are also used. The coolants are used to cool the tool and part to minimize overheating during machining and grinding applications. The coolant is collected in sumps and continuously recirculated. In time, the coolants break down and become less effective. The coolants, now spent, must be disposed of.

    By ENCON Evaporators based in Hooksett, NEW HAMPSHIRE (USA).

  • Dye penetrant wastewater treatment

    Dye penetrant wastewater includes the presence of a fluorescent dye at about 2-3% in the wastewater. Dye penetrants are used as a method of testing weld integrity to confirm there are no leaks. Dye Penetrant wastewater cannot be simply flushed down the drain. Many companies choose to avoid the headaches of labor-intensive wastewater treatment technologies such as chemical treatment or filtration and simply pay to haul the wastewater. This however, can become quite expensive.

    By ENCON Evaporators based in Hooksett, NEW HAMPSHIRE (USA).

  • Air scrubber wastewater solution

    Air Scrubbers strip out contaminants from exhaust stacks typically by trickling a stream of salt solution through a bed of media to extract contaminants by putting them into solution. The salts found in these solutions are typically sulfates, chlorides, and carbonates. Air Scrubber wastewater tends to have high total dissolved solids (TDS) or salts. Air Scrubber Wastewater cannot be simply flushed down the drain. Many companies choose to avoid the headaches of labor-intensive wastewater treatment technologies such as chemical treatment or filtration and simply pay to haul the wastewater. This however, can become quite expensive.

    By ENCON Evaporators based in Hooksett, NEW HAMPSHIRE (USA).

  • Landfill Piping Solutions

    Landfills are active environments. Through natural processes of rainfall, condensation, and decomposition, landfills themselves produce a liquid waste stream, called leachate. Often the leachate contains hazardous materials, so properly managing a landfill requires handling the waste. ISCO offers products and services to help manage leachate including HDPE landfill pipe, perforated and slotted pipe as well as custom fabricated fittings.

    By ISCO Industries, LLC based in Louisville, KENTUCKY (USA).

  • Pumping solutions for offshore liquid ring pump systems

    In offshore drilling, the safety of both people and the environment is dependent on the constant management of risk. With great public concern and media attention, the safety of offshore drilling for both people and environment, has been widely discussed for many years. Offshore drilling can potentially cause oil spills or disposal of other waste into the ocean, impacting human life and marine life.

    By Samson Pumps A/S based in Viborg, DENMARK.

  • Premium

    Waste Sorting - Single Stream Recycling

    Single stream, otherwise known as dry commingled waste, comprises mostly of paper & card, plastic packaging waste, textiles and cans. Given that some collection schemes include glass whilst others exclude glass from commingled collection, we have provided figures for both waste types.

    By TOMRA Sorting (TITECH) based in Mülheim-Kärlich, GERMANY.

  • Premium

    Mixed Municipal Solid Waste Sorting

    Traditional (manual) or semi-automated techniques, however, are only able to recover low levels of separate materials from mixed municipal waste streams and mean considerable content going to landfill. In contrast, TOMRA Sorting’s fully automated, state-of-the-art, sensor-based municipal sorting systems convert complex and varied - even dirty - municipal solid waste streams into high quality, separated, marketable output. The systems also make manual sorting unnecessary, thus reducing labor costs and material loss, while increasing efficiency. Operationally, through using detection techniques such as near infrared (NIR), x-ray transmission (XRT), color line cameras and metal sensors in combination.

    By TOMRA Sorting (TITECH) based in Mülheim-Kärlich, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you