Waste Tracking Applications

8 Results found
Only show results available in Virginia?
OK
  • Category: Waste & Recycling ×

  • Subcategory: Waste Tracking ×

Posi-Shell Coatings

by LSC Environmental Products, LLC     based in Apalachin, NEW YORK (USA)

Posi-Shell erosion control coatings are the perfect low-cost solution to protect and stabilize slopes. Our long-term coatings are spray-applied and allow engineers or operators to protect acres (hectares) of slope in a single day. The finished coating is durable and textured, reducing water energy across large areas. The final product eliminates erosion, siltation, and (as a result) expensive rework. The product can be designed to last for years and is easily tracked into slopes when intermediate protection is no longer necessary. Indeed, when integrated, Posi-Shell actually improves soil quality by conditioning it for future seeding. Posi-Shell’s simplicity and durability make it tremendously effective at controlling windblown dust, infiltration, or runoff associated with clean or contaminated stockpiles. Unlike cumbersome tarps or geo-membranes, Posi-Shell erosion control coatings are spray applied and do not require any ballast. Posi-Shell conforms and adheres to any topography and delivers 100% clean runoff. Stockpile loading or removal is accomplished by breaking into the coating where desired. Active areas may be left open or quickly resealed if required. Posi-Shell erosion control coatings are ideal for protecting expensive piles of salt, coal, or cement clinker; and are used extensively for containing hazardous or radioactive soils.

Measurement solution for Biomass combustion research

by Protea Limited     based in Middlewich, UNITED KINGDOM

The use of alternative combustion fuels that provide a renewable source of energy is a major area of research and investment. Sources of biomass fuels include virgin wood, energy crops, agricultural residues, food waste and industrial waste. Controlling the combustion process of any new fuel and keeping track of the biomass fuel emissions of combustion by-products is important to users of these new fuels.

Multispectral Imaging for Environmental Management

by GeoVantage     based in Peabody, MASSACHUSETTS (USA)

GeoVantage digital multispectral imaging enables large-scale environmental changes such as fire damage, flooding, erosion, or chemical spills, to be quickly located and quantified. Recurrent issues can be tracked over time by comparing imagery taken at different intervals. This approach allows for the most effective containment and solution planning.

GeoVantage customizes each imagery collection plan to optimize your environmental management objectives, including vegetation delineation, pervious/impervious mapping, water quality, and change detection.

Waste water respirometry solutions for toxicity tracking

by Strathkelvin Instruments Ltd.     based in Motherwell, UNITED KINGDOM

If toxicity is identified in a mixed sewage entering a treatment works, the problem for the plant manager is to track and identify the source of the toxicity. This can be done by sampling the effluent stream at various points in its length. By working in a logical sequence back up the sewer network the number of samples can be minimised. This type of testing should be rigorously enforced for new product introduction by a waste producer, as well as sampling the effluents directly at source. The samples would be tested against the activated sludge of the receiving works, using the Respiration Inhibition Test or the Nitrification Inhibition Test.

Environment health and safety software for the mining industry

by Intelex Technologies Inc.     based in Toronto, ONTARIO (CANADA)

Intelex software addresses the unique needs of clients throughout the Mining industry. Our mining clients use Intelex to manage a wide range of activites, documents, tasks and data including MSHA requirements, permits, audits, ISO certifications, wastewater discharge, safety citations, and training all from a centralized, web-based portal.

Recycling Equipment for Waste to Energy

by Bollegraaf Recycling Machinery BV     based in Appingedam, NETHERLANDS

Create high-value RDF with MSW and C&I waste; Optimising the output in terms of economic value and against the lowest possible costs per tonne is the short-term goal for every single system that Bollegraaf provides. The benefits: permanently low operating cost and lowest cost per tonne. The result: fast return on investment.

Turbidity Monitoring

by Chelsea Technologies Group     based in West Molesey, UNITED KINGDOM

The monitoring of Turbidity is key requirement of the water industry in both water supply and water recovery systems. Within the water supply process, monitoring of turbidity allows operators to assess the efficiency of filters for particulate removal through the process. Similarly, with water recovery (Waste Water Treatment Works), the measurement of turbidity is a key parameter to track the removal of particulate through the process. CTG can provide turbidity measurements with the UniLux sensor, or provides turbidity as one of the parameters available within the 3 channel TriLux. For applications requiring turbidity measurements compliant to ISO07027:1999, CTG can offer the TurbiLux Nephelometer.

Noise monitoring solutions for machine diagnostics

by Brüel & Kjær Sound & Vibration Measurement A/S     based in Nærum, DENMARK

Due to production and assembling tolerances, wear and load variation, the moving parts in any rotating machine will sooner or later cause annoying vibrations that eventually lead to breakdowns.

Need help finding the right suppliers?

Let the XPRTs do the work for you