Only show results in Virginia? Ok

Boiler Water Applications

  • Evaporators technology for food and beverage industry

    The food & beverage industry uses water for containers’ and plants’ rinsing, raw materials and plants’ washing, and for boilers feeding. All the effluents coming from the production process can be reused a second time allowing water saving and matter recovery (when needed).

    By EVALED - Veolia Water Technologies based in Zoppola (PN), ITALY.

  • Premium

    Process water treatment

    Process water covers the wide range of boiler feed water, cooling water for heat exchangers or engine, chemicals dilution, etc. It should typically have a conductivity ranging from 0,1 to 50 uS/cm, with little to no hardness to avoid scaling in heating system. Oxygen and carbon dioxide should be removed to prevent corrosion. Depending on your application, the water quality requirements can vary: Boiler feed water characteristic. Cooling water quality. Tap water or fresh groundwater are the most widely used source of water to produce process water.

    By Lenntech Water Treatment based in Delft, NETHERLANDS.

  • Premium

    Chemical Water Treatment for membrane treatments

    Membrane units, in our days are widely used in the water pre-treatment preparation and are becoming one of the most important technologies in the production of high pure water. Nevertheless they often face problems with scaling and fouling and are therefore limited by frequent maintenance, downtime and high costs. Our treatment programs are specifically designed for membrane units like reverse osmosis, ultra- and nanofiltration and enable to remove or preventive control scaling and fouling. Our main target is to run these plants under environmentally friendly and beneficial economic conditions. Special attention is given to an efficient utilization of energy as well as saving precious water. Kurita develops an efficient and effective treatment concept achieving an optimal economic operation and a maximum operational reliability of a plant.

    By Kurita based in Ludwigshafen, GERMANY.

  • Premium

    Applications and Air Pollutants Removed for Mineral Products Industry

    Removal of acid gases and particulate from cement, brick and other product kilns. Mineral product dryers including coal. Hot mix asphalt plant particulate control. Sulfur dioxide and hydrochloric acid gas removal.

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Sialex for the OEMs Application

    Our products are installed on many industrial areas and in the private household.We have also experience with fluids other than water, which will receive more attention in the future. Sialex is a production process employed in the manufacture of a range of fluid treatment devices. The initial product Sialex®Ring is an “After-sales” device. It is added to existing products (water pipes, in front of heat exchangers, water boilers etc.). Our devices are installed after the original device has been installed.

    By Phoenix Ring Manufaktur UG based in Erbach, GERMANY.

  • Reverse Osmosis for the power & energy industry

    Pure Aqua, Inc.’s core business is water treatment and has a number of products for the Power and Energy industry.  Whether that is condensate polishing, cooling water treatment systems, or boiler feed water treatment.  As a complete system integrator, Pure Aqua has a wide range of solutions for the varied sources of water and different types of contaminants associated with boiler feed water.

    By Pure Aqua, Inc. based in Santa Ana, CALIFORNIA (USA).

  • Premium

    Boiler Water Testing / Cooling Tower Water Testing

    Boilers and cooling towers share two major water related problems: deposits and corrosion. As steam is generated by a boiler or water evaporating from a cooling tower, dissolved minerals are left behind, increasing the concentration of these minerals. Additional minerals are introduced via the water added to makeup the water lost to steam/evaporation. Eventually, the minerals reach a level (or cycle) of concentration that will cause either loss of efficiency due to scale or damage from corrosion. This level can be determined by the Ryznar or Langlier indices and correlated to a conductivity or TDS range. Most people recognize problems associated with corrosion. Effects from scale deposits, however, are equally important. For example, as little as 1/8` of scale can reduce the efficiency of a boiler by 18% or a cooling tower heat exchanger by 40%!

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Water treatment chemicals for the manufacturing industry

    In all industrial sectors, productivity and economic efficiency are the main factors for sustainable success. Reliable and durable production plants together with their cooling, boiler and waste water systems therefore play an important role. For more than 60 years, Kurita has specialized in water and process treatment. Our 5,200 employees work on behalf of our customers worldwide in a variety of industrial fields. Our individual treatment concepts and competent service help ensure the safe and economical operation of their facilities.

    By Kurita based in Ludwigshafen, GERMANY.

  • Clean drinking water monitoring solutions for wastewater treatment industry

    Continuous on-line monitoring can be used to alarm unacceptable deviations from established control points and to ensure quality standards are maintained.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Tomato Paste Production Line

    With advanced technology and elaborate workmanship, we provide turnkey projects for tomato paste production. The handling capacity of the tomato paste production line is 1-2 tons per hour. Based on your requirements, we can provide on site installation, commissioning and training service for you. With reasonable design and low energy consumption, our tomato processing equipment is your cost-effective choice. Working Flow of Tomato Paste Production Line Fresh Tomato → Tomato Washing → Tomato Sorting→ Breaking → Preheating→Tomato Pulping → Vacuum Concentration → Paste Sterilization → Finished Tomato Paste More details: Email:

    By Amisy Machinery based in Zhengzhou, CHINA.

  • Industrial water boiler feed water

    Ion exchange is an effective, versatile means of conditioning boiler feedwater. The term “ion exchange` describes the process : as water flows through a bed of ion exchange material, undesirable ions are removed and replaced with less objectionable ones. For example, in softening processes, calcium and magnesium ions(hardness) are exchanged for sodium ions. In dealkalization, the ions contributing to alkalinity(carbonate, bicarbonate, etc.) are removed and replaced with chloride ions.

    By PuriTech Ltd based in Herentals, BELGIUM.

  • Premium

    Chemical Water Treatment for boiler water & heating systems

    In nearly all industrial areas steam is needed for different aims e.g. steam for process side, heating purpose or the generation of electricity. To reach the best efficiency of the boiler system an optimal boiler water treatment is essential. Disturbances in boilers caused by deposits, scaling, corrosion, local overheating or carryover into the steam reduce the operating safety and could lead to tremendous economic damages. Kurita delivers innovative technologies to prevent scale and corrosion in the whole boiler system - feed water tank, boiler, steam and condensate system.

    By Kurita based in Ludwigshafen, GERMANY.

  • Premium

    Water treatment chemicals for the food & beverage industry

    The food and beverage industry is suffering from severe economic pressure. Efficient and continuous production processes are therefore business critical. By choosing Kurita concepts for your cooling water, boiler water and waste water plants as well as your reverse osmosis systems and autoclaves – all of which are specially adapted to your needs – you opt for economic and ecological treatment, leading to more productivity and cost-efficiency.

    By Kurita based in Ludwigshafen, GERMANY.

  • Premium

    Water Testing for Textile Manufacturing

    The textile manufacturing industry encompasses many and diverse processes that rely heavily on the use of water, energy, chemicals, and other resources. Wet spinning, sizing, desizing, scouring, bleaching, mercerization, dyeing and printing are just a few. Monitoring and controlling the pH, TDS/Conductivity/Salt Concentration, ORP (REDOX), and Temperature of the aqueous solutions used in these processes conserves costly resources, controls quality, and reduces the amount of pollution that must be treated before discharge of effluent wastes. This can be done manually with handheld instruments or automatically with in-line monitor/controllers.

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Online water analysers for pure/high purity water

    Pure water and high purity water are crutial factors of production in numerous processees and industries. Depending on the demand it is used as a raw material, auxiliary or operating material. Doing this, it is very important to pay particular attention to the quality of the water, because this is crucial for product quality and safe operation of the production facilities. Therefore, continuous monitoring is essential - from an ecological as well as economic point of view.

    By LAR Process Analysers AG based in Berlin, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you