Only show results in Michigan? Ok

Gate Valves equipment for Water and Wastewater

  • Showcase

    EBRO ARMATUREN - Model Modular system E65-E210 - Electric Actuator

    Something not many people know: EBRO produces its own actuators - and has been doing so for 30 years. For EBRO customers this means that butterfly and gate valves can always be equipped with the most suitable actuator. No compromises, just the best possible match of components - this is what the EBRO actuator series stands for.Pneumatic actuators, ...

    By EBRO Armaturen Gebr. Bröer GmbH based in Hagen, GERMANY.

  • Premium

    econ VacuDry - Vacuum Dryer

    The VacuDry system is available in different sizes with different throughput capacity. Depending on the needs of our costumers we decide which is the best option. VacuDry plants are equipped with a varying number of vacuum dryers, totalling a gross volume of 1,500 to 12,000 litres. The dryers work in a batch-wise process. The batch time depends on ...

    By econ industries services GmbH based in Starnberg, GERMANY. from VacuDry Vacuum Thermal Desorption Technology Product line

  • Premium

    WesTech - Stop Gates and Lifting Beams

    WTR Stop Gates and Lifting Beams are an essential component to support dewatering of intake structures for maintenance, inspection, or isolation. Stop gates, also called stop logs, are used in all types of applications where maintenance under dry conditions is required, inspection of the structure is necessary, or a flow stream needs to be ...

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA). from Intake Screens Product line

  • Premium

    Carbolite - Model HVTT Series - High Vacuum Turbo-molecular Tube Furnaces

    The HVTT high vacuum turbo-molecular tube furnaces are available in three standard sizes. A range of tube lengths and diameters is available. The HVTT high vacuum tube furnaces at 1500 °C are available with two work tube diameters. These high vacuum furnaces are often the starting point for additional customisation such as automated control of ...

    By Carbolite Gero Ltd - part of Verder Scientific based in Hope, UNITED KINGDOM. from Vacuum Furnaces - Tube Furnaces Product line

  • Premium

    QED - Precision Accu-Flo Wellhead

    Optimize LFG Control, Accuracy and Dependability with QED Accu-Flo Wellheads. QED Accu-Flo wellheads can help prevent landfill gas migration, emissions and subsurface fires. Landfill owners and operators will appreciate the Accu-Flo design that meets the special equirements of landfill gas recovery for environmental compliance and energy ...

    By QED Environmental Systems Ltd. based in Coventry, UNITED KINGDOM. from Landfill Products Product line

  • Premium

    ACME - Model ACRS Series - Automatic Scraper Strainer

    The ACME Automatic Scraper Strainer has been designed to remove solids from 150mm in size down to 75 micron particles. The general literature piece describes the various connection options available as well as the advantages of a scraper strainer over a backwash strainer. These strainers are available with connections from 1' up to 36' in ...

    By Acme Engineering Prod. Ltd. based in Montreal, QUEBEC (CANADA). from Strainers Product line

  • Premium

    Brackett Green - StopGate and Bar Screens

    Brackett Green StopGates™ modules are typically installed at the bottom of an intake channel, attached to either the apron wall or stacked on top of other modules so the gate extends above deck level. Anchor plate guides are embedded into the concrete and a purpose-designed lifting beam is provided for raising or lowering the gate modules. ...

    By Ovivo USA LLC based in Salt Lake City, UTAH (USA). from Power - Cooling Water Treatment Product line

  • Premium

    Shand & Jurs - Model 93376 - Semi Automatic Tank Gauge and Sampling Lock

    The Shand & Jurs Model 93376 Semi-Automatic Tank Gauge and Sampling Lock has been designed as an intermediate step between hand gauging and fully automatic tank gauging. The inherent inaccuracy of hand gauges led to the design of this tank gauge, which entirely eliminates the human element in the sequence of lowering the tape and bob to the ...

    By Shand & Jurs (L&J Technologies & L&J Engineering) based in Hillside, ILLINOIS (USA). from Automatic Tank Gauges Product line

  • Premium

    Elgin - Model ESS-3000DT - Dredge Dewatering System

    Elgin Separation Solutions manufactures effective solid recycling systems capable of handling high flow capacity for dredge dewatering operations. On-board linear motion shakers have the largest screening surface area on the market. In addition, systems have complete desilter and desander hydrocyclone manifolds incorporated into packaged trailer ...

    By Elgin Separation Solutions based in Stafford, TEXAS (USA). from Dredge Dewatering Product line

  • Premium

    EBRO ARMATUREN - Pneumatic actuator type EB-SYD

    Something not many people know: EBRO produces its own actuators - and has been doing so for more than 40 years. For EBRO customers this means that butterfly and gate valves can always be equipped with the most suitable actuator. No compromises, just the best possible match of components - this is what the EBRO actuator series stands for. Pneumatic ...

    By EBRO Armaturen Gebr. Bröer GmbH based in Hagen, GERMANY.

  • Premium

    OSi - Model OFS-2000 - Combustion and Emissions Air Flow Sensor

    OSI's patented Optical Flow Sensor (OFS) makes drift-free measurements across the entire stack, duct or pipe diameter and calculates an accurate average flow reading. It is the only flow sensor that gives a true non-contacting cross-stack flow measurement of the process. The OFS uses our EPA Method 14 approved optical scintillation technology. The ...

    By Optical Scientific Inc. (OSi) based in Gaithersburg, MARYLAND (USA). from Optical Flow Sensor Product line

  • Premium

    Rotork - Mastergear Large Bevel Gear Range

    Complete range of ductile iron multi-turn bevel gearboxes suitable for the most demanding manual and motorised applications. Suitable for cast and fabricated sluice gates, gate valves, globe and pinch valves.

    By Rotork plc based in Bath, UNITED KINGDOM. from Gearboxes and Gear Operators Product line

  • Premium

    Rotork - Model IB - Multi-Turn Bevel Gearboxes

    Rotork Series IB operators are multi-turn (rotary) devices intended for the operation of gate, globe, sluice and penstock valves. These gearboxes are suitable for the most demanding motorised applications.

    By Rotork plc based in Bath, UNITED KINGDOM. from Gearboxes and Gear Operators Product line

  • Premium

    Stafsjoe - Knife gate valve type WB 11

    Our sister company in Sweden Stafsjö Valves develop and manufacture high performance shut-off valves for pulp lines in pulp and paper mills, mineral processing and tailing systems in the mining industry, waste/effluent water/sludge handling for utilities and industries, ash handling at power stations and many others.

    By EBRO Armaturen Gebr. Bröer GmbH based in Hagen, GERMANY.

  • Premium

    OSi - Model OFS-2000F - Flare Stack Flow Sensor

    OFS 2000 measures optical scintillation across the entire distance between the transmitter and receiver. It is the only flow sensor that gives a true non-contacting complete cross-stack flow measurement. OSI’s patented optical scintillation measurement algorithm uses advanced Digital Signal Processing (DSP) to measure the movement found in a ...

    By Optical Scientific Inc. (OSi) based in Gaithersburg, MARYLAND (USA). from Optical Flow Sensor Product line

  • Premium

    ENVEA - Model MaxxFlow HTC - Massflow Measurement for Dry Bulk Solids

    Contact-less and maintenance free measurement of high mass flow rates of dry bulk solids independent of pipe run. Electromagnetic flowmeter, designed to measure bulk material flows up to 300 t/h. The meter has no mechanical parts in the flow, is 100 % dustproof and erosion free thanks to the ceramic inner pipe: arbitrary mounting position ...

    By ENVEA based in Poissy, FRANCE. from Process - Flow Measurement Product line

  • Premium

    Model IS Range - Motorised Multi-Turn Gearboxes

    Complete range of heavy-duty cast iron multi-turn spur gearboxes suitable for the most demanding motorised applications where the gearbox input shaft needs to be parallel with the valve stem for globe and gate valves and sluice gates.

    By Rotork plc based in Bath, UNITED KINGDOM. from Gearboxes and Gear Operators Product line

  • Premium

    Rotork - Model IS Series - Motorised Multi-Turn Gearboxes

    Complete range of heavy-duty cast iron multi-turn spurgearboxes suitable for the most demanding motorisedapplications where the gearbox input shaft needs to beparallel with the valve stem for globe and gate valves andsluice gates.Torque range up to 43,386 Nm (32,000 lbf.ft).Thrust range up to 2,900 kN (652,000 lbf).20 sizes. Ratios from 1:1 to ...

    By Rotork plc based in Bath, UNITED KINGDOM. from Gearboxes and Gear Operators Product line

  • Premium

    Stafsjoe - Knife gate valve type  XV

    Our sister company in Sweden Stafsjö Valves develop and manufacture high performance shut-off valves for pulp lines in pulp and paper mills, mineral processing and tailing systems in the mining industry, waste/effluent water/sludge handling for utilities and industries, ash handling at power stations and many others.

    By EBRO Armaturen Gebr. Bröer GmbH based in Hagen, GERMANY.

  • Premium

    EBRO ARMATUREN - Electric actuator E 50 - E 210

    Something not many people know: EBRO produces its own actuators - and has been doing so for more than 40 years. For EBRO customers this means that butterfly and gate valves can always be equipped with the most suitable actuator. No compromises, just the best possible match of components - this is what the EBRO actuator series stands for. As a ...

    By EBRO Armaturen Gebr. Bröer GmbH based in Hagen, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you