Only show results available in Virginia? Ok

Penstocks equipment for Water and Wastewater

  • Premium

    ASTIM - Penstocks Flow Control and Isolation of Fluids

    The primary application of penstocks is the flow control and isolation of fluids associated with water, waste water, sewage treatment plant, power generation, irrigation schemes and process plant. Section of the correct penstock to suit the duty is important to satisfy the design criteria and provide the most cost effective solution. Operation of ...

    By ASTIM A.S. based in Gebze - Kocaeli, TURKEY. from Penstocks Flow Control and Isolation of Fluids Product line

  • BIOGEST AG - Model Type DS - Throttle Penstock

    Throttle penstocks have the task of restricting the pass forward flow during storm conditions and are used to limit the flow from storm water retention tanks, sewers, retention tanks or overflow chambers to a preset value. The max. flow rate is obtained when having the maximum water head.

    By BIOGEST AG based in Taunusstein, GERMANY. from Throttle Penstock Product line

  • Stainless Steel Hand Wheels

    Durable stainless steel handwheel for ergonomic operation of the penstock. Available with cylindrical and conical square connector, for connection to shaft with key and for rising stem. The operating direction is engraved. Optionally available with ball handle.

    By BÜSCH Technology GmbH based in Nürnberg, GERMANY. from Stainless Steel Hand Wheels Product line

  • BAP - Model 3 - Penstock

    Penstocks in round, square or rectangular model. Materials: stainless steel, aluminium, steel and cast iron. In the nominal widths. DN 100 - 2000 and above. Also as regulation valve version deliverable.

    By BAP Abwassertechnik GmbH based in Bünde, GERMANY.



    By Bidapro S.L based in Asteasu (Gipuzkoa), SPAIN.

  • Model Type RE3 - Channel Sluice

    Soft sealing on three sides in accordance with seal class 5 (DIN 19569 part 4)Use as regulating or throttling protection. The ABS U - sealing profile is force-closed and tension-restrained in order to achieve low frictional forces and torques PE-UHMW slide rails for linear seal pressure.

    By ABS-Armaturen GmbH based in Bad Oeynhausen, GERMANY. from Channel Sluice Product line

  • Model VMV-T Ø 200 to 800 - Penstock

    Closing off the sanitation networks with an upstream and downstream seal for a pressure of 7 mCE

    By Saint Dizier Environnement based in Boulogne-Billancourt, FRANCE. from Penstock Product line

  • Isolating/Control Penstock

    Designed for 0.6 bar on-seating and off-seating head. Door Design according to static requirements. Frame mounted EPDM double wiper side and soffit seals. Door mounted EPDM invert seal. All seals mechanically fixed and easy replaceable

    By IBS GmbH based in Thierhaupten, GERMANY. from Isolating/Control Penstock Product line

  • Robmet - Model 10.VS.BI.1.4301C&S.EPDM.1.4021.BR.RED. - Penstock valve

    MATERIALS:Frame: Carbon steel - AISI 304 - AISI 316Door: Carbon steel - AISI 304 - AISI 316Spindle: AISI 303 - AISI 304 - AISI 316Nut: BronzeExtension: AISI 304 - AISI 316Sliders: High density polyethyleneSeal: EPDM (Ethylene Propylene Diene Monomer)

    By Robmet Srl based in Piatra Neamt- Roman, ROMANIA.

  • Cast Iron Penstock

    Available in size range 150mm – 1000mm as standard (larger sizes available). Pressure range 6m on 3m off.

    By Industrial PENSTOCKS ltd based in Dudley, UNITED KINGDOM.

  • BIOGEST AG - Model Type FS - High Grade, Robust, Flat Penstock

    High grade, robust, flat penstock made of 304 stainless steel, for Installation in front of the inlet or outlet of a shaft construction, according to German Institute for Standardization (DIN) 18202. The penstock of BIOGEST is sealed to all 4 sides, according to DIN 19569, part 4, constructed for closing / opening a wall inlet or outlet opening ...

    By BIOGEST AG based in Taunusstein, GERMANY. from High Grade, Robust, Flat Penstock Product line

  • Stainless Steel Weir Penstocks

    Waterfront designs and manufactures a range of Stainless Steel Weir Penstocks for applications in the potable and waste water sectors as well as for drainage, power plants and industrial requirements.With the application of its advanced computer design and quotation programmes, a rapid response is achieved in providing quality customer service and ...

    By Waterfront Engineering based in Glasgow, UNITED KINGDOM. from Stainless Steel Weir Penstocks Product line

  • Litostroj - Penstocks

    Penstocks of all diameters, lengths and designs including bifurcations: analysis and calculations, elaboration of technical documentation, manufacture, supply and site erection. Surge tanks for long penstocks and for pumped storage hydro power plants.

    By Litostroj Power based in Ljubljana, SLOVENIA. from Penstocks Product line

  • BAP - Model 2 - Draw-off Penstock

    Draw-off pentsock: ruound,  square or rectangular model with grad handle. Materials: stainless steel, aluminium, steel and cast iron

    By BAP Abwassertechnik GmbH based in Bünde, GERMANY.

  • Intereco - Penstocks

    INTERECO produces penstocks to intercept of channels and a level regulators or flow rates. Several models, from those for the channel to those with seal 3 or 4 sides range, with the possibility to choose the manual or motorized models.

    By Intereco S.n.c. based in Scalenghe (TO), ITALY. from Penstocks Product line

  • Althon - Model 200mm - Inline Penstock

    Althon 200mm inline penstocks are used in Althon Inline Penstocks can be used in surface, sewer and water process applications. Inline penstocks are a simple and highly effective way to prevent water backflow into a system. Our inline penstocks can be flanged mounted or coupled onto existing pipework. Our 200mm inline penstocks can be operated ...

    By Althon Limited based in Norwich, UNITED KINGDOM. from Inline Penstock Product line

  • S.FIVE GROUPE - Model PEN-CIR500 - Wall penstock Circular DN 500

    Circular Orifice sliding wall penstocks sealed on all 4 sides.Used for on-off or control applications in wells, tanks, pipe outlets, etc. Carbon or stainless steel fabricated construction, with tight sealing by means of elastomer seals.

    By S.FIVE GROUPE Sarl based in Rouiba, ALGERIA.

  • Cast Iron Penstocks

    Cast Iron penstocks are circular or rectangular metal faced penstock suitable for wall and flange mounting application, suitable for on-seating pressure as standard but, dependent on size, will take a degree of off-seating pressure. Conventional adjustable wedges are positioned around the door as required to suit the duty ...

    By Ham Baker Group based in Stoke-on-Trent, UNITED KINGDOM. from Cast Iron Penstocks Product line

  • Fabricated Penstock

    Available in size range 100mm- 4000mm, for pressure ranges up 10m as standard. Higher pressures are available . Materials of construction Mild steel, St St 304, 316 & Duplex 2507.

    By Industrial PENSTOCKS ltd based in Dudley, UNITED KINGDOM.

  • Model UV - Drives for Penstocks

    The standardised, stainless conical square 27/32 with 19 mm square socket for mobile drives or tool square end (ratchet) is positioned 100 mm below floor level. Roller bearings on dowelled-on shaft wall bracket and cardan joints made of 1.4301 or 1.4571 to create a axis offset (max. deflection 30°).

    By ABS-Armaturen GmbH based in Bad Oeynhausen, GERMANY. from Drives for Penstocks Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you