Wastewater Sludge Equipment For Water And Wastewater
-
ShowcaseManufactured by BioKube A/Sbased in DENMARK
BioKube Venus systems are small STP plants most commonly used for single or smaller groups of households. The Venus systems are typically installed after a septic tank either in- or above ...
-
ShowcaseManufactured by Warden Biomediabased in UNITED KINGDOM
Biopipe+ has a wheel shape with internal fins and large openings, offering a protected surface area of 500m²/m³. The Biopipe+ is designed to provide a large protected surface area for the biofilm and optimal conditions for the bacteria culture when the media are suspended in water. A durable, rugged and highly efficient media for moving bed biological reactors (MBBR) and integrated ...
-
PremiumManufactured by CETCObased in USA
MACRO-FILL is a granular, advanced super-absorbent material that rapidly absorbs and retains large volumes of water from aqueous solutions. MACRO-FILL may absorb up to 300 times its weight in freshwater while expanding less than 5% in total ...
-
PremiumManufactured by WTW - a xylem brandbased in GERMANY
Digital ISE sensor for NH4 and N03, connectable to the IQ SENSOR ...
-
PremiumManufactured by Sebright Products, Inc.based in USA
A Bright Belt Filter Press rental might be the answer, because we offer rentals with buyout options. Secondly, we tell you the purchase price upfront on the available equipment and a portion of the rental cost goes toward that purchase price. However, if the equipment doesn’t work out for you, it can be returned any time after the 4 week minimum rental period. You can also rent the ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
PULSION MBR modules offer up to 40% aeration energy reduction and 25% footprint reduction. Leveraging the key differentiating features of PURON MBR, this innovation pulses a large bubble through a chambered fiber bundle, creating a piston-like pumping action that results in lower air and aeration energy requirements than traditional scouring methods. Improved recirculation of mixed liquor in the ...
-
PremiumManufactured by Warden Biomediabased in UNITED KINGDOM
Spoke design biological filter media with internal and external fins and surface area of 1000m²/m³. The Biotube is designed to provide a large protected surface area for the biofilm and optimal conditions for the bacteria culture when the media are suspended in water. A durable, rugged and highly efficient media for moving bed biological reactors (MBBR) and integrated fixed film ...
-
PremiumManufactured by Flottweg SEbased in GERMANY
The Flottweg Z8E: The Giant Decanter With the new Z8E decanter centrifuge, Flottweg is extending its product range and setting new standards. Right from the start of development of the Z8E, the target was set of concentrating on the specific requirements of an extremely wide range of industries. The modular design of this decanter centrifuge means it is possible to adjust optimally to all kinds ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
This patented module features reinforced PVDF hollow fibers that are fixed only at the bottom, virtually eliminating the clogging buildup of hair, fibrous materials and sludge solids. Solids and particulates, including bacteria, remain on the outside, while permeate is drawn through the membrane to the inside of the fibers. The aeration nozzle is centered in the fiber bundle to scour the entire ...
-
PremiumManufactured by Fluence Corporationbased in USA
Upgrade Wastewater Treatment Plants with SUBRE; With increased urbanization, wastewater resource recovery facilities face new challenges. When a conventional activated sludge wastewater treatment facility has reached its limit, Fluence's SUBRE can come to the rescue. Instead of enlarging current plants and building new basins, SUBRE modules are submerged in existing chambers, improving effluent ...
-
PremiumManufactured by Devise Engineering S.A.based in GREECE
The proposed Containerized Sludge Dewatering Plants by DEVISE present a complete solution for the management (thickening & dewatering) of primary and biological sludge produced during municipal or industrial wastewater treatment. All the necessary systems & equipment for the dewatering plant, excluding the sludge collection tank-basin, are pre-engineered, pre-fabricated, hydraulically ...
-
PremiumManufactured by Sebright Products, Inc.based in USA
The Bright Technologies Belt Filter Press is a modern design that includes three (3) US Patents and many innovative features that provide high performance in a compact, high value package. Many competing products are based on old and inferior designs that do not utilize filtration area effectively. Our belt press is designed with long term value and ease of operation in mind. Stainless Steel ...
-
PremiumManufactured by HRS Heat Exchangers Ltd.based in UNITED KINGDOM
Evaporation is an efficient way of reducing the volume of effluents and wastes. Our evaporation systems raise effluent to its boiling point so that water is evaporated and then condensed, thus obtaining a concentrated end product and water. Forced recirculation uses a pump to send the product through the evaporator at high speeds, ensuring high velocity, good heat transfer and minimal fouling. ...
-
PremiumManufactured by BioKube A/Sbased in DENMARK
BioKube’s Pluto systems are small STP plants designed for treating sewage water from single households. The Pluto systems are typically installed after a septic tank either in- or above ...
-
PremiumManufactured by Warden Biomediabased in UNITED KINGDOM
Bioflo+ has a wheel shape with internal fins and large openings, offering a protected surface area of 800m²/m³. Bioflo+ is designed to provide a large protected surface area for the biofilm and optimal conditions for the bacteria culture when the media are suspended in water. A durable, rugged and highly efficient media for moving bed biological reactors (MBBR), integrated fixed film ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The stainless steel probe LMK 387 was developed for level and gauge measurement in wastewater, sludge or water courses. The mechanical robustness of the front-flush ceramic diaphragm faciliates an easy disassembly and cleaning of the probe in case of service. Compared to the level probe LMK 382 the outside-diameter is only 22 mm, which allows an easy installation and backfitting in 1" tubes or ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The stainless steel probe LMK 387H was developed for level and gauge measurement in wastewater, sludge or water courses. The mechanical robustness of the flush ceramic diaphragm facilitates an easy disassembly and cleaning of the probe in case of service. The outer diameter is only 22 mm, whereby the installation or retrofitting can be easily carried out in 1 "pipes or in confined installation ...
-
PremiumManufactured by Warden Biomediabased in UNITED KINGDOM
Biotag has a wheel shape with internal fins and large openings, offering a protected surface area of 650m²/m³. Biotag is designed to provide a large protected surface area for the biofilm and optimal conditions for the bacteria culture when the media are suspended in water. A durable, rugged, and highly efficient media for moving bed biological reactors (MBBR) and integrated fixed film activated ...
-
PremiumManufactured by Warden Biomediabased in UNITED KINGDOM
Wheel shaped random filter media with internal and external fins and surface area of 600²/m³. The Biopipe is designed to provide a large protected surface area for the biofilm and optimal conditions for the bacteria culture when the media are suspended in water. A durable, rugged and highly efficient media for moving bed biological reactors (MBBR) and integrated fixed film activated ...
-
PremiumManufactured by Flottweg SEbased in GERMANY
Honored with the German Innovation Award 2019, the Xelletor series is one of the greatest achievements in the field of sewage sludge. Dewatering sewage sludge is standard for wastewater treatment plants and since it usually has to be transported away, operators have an interest in separating as much water as possible from the sludge. This saves weight and thus reduces costs. Savings of up to 10% ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you