Only show results in Virginia? Ok

Wastewater Treatment Applications

  • Premium

    Wastewater Treatment

    Many industrial and pharmaceutical processes generate wastewater with volatile contaminants that increase the COD and BOD to a point where discharging to municipal wastewater is very costly or not an option. These contaminants can be removed from the water by distillation, substantially lowering the disposal cost, and, in many cases, the removed components can be further purified and reused in the process. MEGTEC offers the following solutions to remove the volatile contaminants and make wastewater suitable for discharge to most municipal wastewater treatment plants: Stripping columns using direct steam or a reboiler Distillation columns using indirect steam heat sources Our technologies have been applied to a range of processes including wastewater treatment from industries such as Pharmaceutical, Semiconductor, Chemical and Petrochemical.

    By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Process Analytics - Wastewater Applications

    Control of wastewater is increasingly becoming important to avoid potential environmental and increasing legal consequences. Accurate pH, O2, conductivity and turbidity measurements are critical in modern wastewater treatment. METTLER TOLEDO offers reliable, cost-effective solutions to control industrial effluents.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    Algae control in raw water reservoirs

    Algae control in raw water reservoirs increases the water quality and lowers chemical consumption. Treating algae in drinking water with ultrasound reduces taste and odor problems without harming the ecosystem.

    By LG Sonic based in Zoetermeer, NETHERLANDS.

  • Premium

    Odor control for wastewater treatment processes

    Natural odor control for wastewater treatment processes. Industrial and municipal wastewater treatment generates odors that can be strong, persistent, and a nuisance to employees, residents, businesses, and industries located near the wastewater treatment plant.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Water Testing for Automatic Rinse Tank Controls

    Proper rinsing is one of the most important steps in quality manufacturing or metal finishing. Plenty of low cost, good quality water for rinsing has been available in the past, so rinse water conservation has been largely ignored. Today, this is no longer true. Tap water costs have increased dramatically. Various new regulations are now in effect which limit the allowable volume of wastewater. Others require wastewater treatment. Still other laws tax the amount of water going down the sewer. These factors have all encouraged many manufacturers and platers to invest in automatic rinse tank control systems. Many platers using automatic control systems for the first time are pleased to discover a reduction in water usage of up to 80%.

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Monitoring petroleum hydrocarbons in wastewater

    The Situation:

    A wastewater treatment company operated an oil/water separation facility on a multi-acre industrial site in Northern California. Its purpose was to recycle oil products for profit while at the same time providing a wastewater treatment service for industries based in Northern California.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Premium

    Wastewater treatment management for storm water treatment industry

    Aging treatment and collection systems in developed countries and the lack of appropriate treatment systems in developing countries along with higher precipitation levels occurring over short periods of time are driving government and industry leaders to expand or upgrade stormwater treatment systems to keep surface water bodies clean, while using this collected water for use in non potable applications.

    By Genesis Water Technologies, Inc. based in Maitland, FLORIDA (USA).

  • Premium

    Wastewater treatment management for domestic waste water reuse industry

    Increasing population growth and urbanization rates across the world are placing increasing stress on clean water resources and making it more imperative to treat domestic waste water. Additionally, rising water costs due to increasing water scarcity and implementation of tighter environmental regulations to reduce waste water discharge limits are requiring municipal domestic wastewater treatment operators to seek innovative and efficient domestic wastewater treatment solutions. Genesis Water Technologies provides these specialized modular treatment solutions to assist municipalities and communities in reducing your waste water footprint, decreasing operational costs, while increasing domestic waste water quality to maintain regulatory compliance.

    By Genesis Water Technologies, Inc. based in Maitland, FLORIDA (USA).

  • Premium

    Elimination of mercaptan odor for wastewater lagoons

    Wastewater lagoons are utilized to collect and stabilize wastewater. Approximately one third of all U.S. secondary waste treatment facilities employ some type of pond system. Lagoons can become septic, or contain compounds that product significant odors.

    By Carus Corporation based in Peru, ILLINOIS (USA).

  • Premium

    Aeration and mixing technologies for municipal wastewater treatment

    Municipalities of every size are subject to public and governmental scrutiny of their municipal wastewater treatment efficacy. As effluent water quality regulations become increasingly stringent, Aeration Industries partners with municipalities to develop economical, environmentally friendly, and sustainable wastewater treatment solutions; customized for each unique environment.

    By Aeration Industries International (AII) based in Chaska, MINNESOTA (USA).

  • Premium

    Chemical Water Treatment for membrane treatments

    Membrane units, in our days are widely used in the water pre-treatment preparation and are becoming one of the most important technologies in the production of high pure water. Nevertheless they often face problems with scaling and fouling and are therefore limited by frequent maintenance, downtime and high costs. Our treatment programs are specifically designed for membrane units like reverse osmosis, ultra- and nanofiltration and enable to remove or preventive control scaling and fouling. Our main target is to run these plants under environmentally friendly and beneficial economic conditions. Special attention is given to an efficient utilization of energy as well as saving precious water. Kurita develops an efficient and effective treatment concept achieving an optimal economic operation and a maximum operational reliability of a plant.

    By Kurita based in Tokyo, JAPAN.

  • Premium

    Industrial solutions for manufacturing industry

    WesTech partners with manufacturing in every industry worldwide. For raw water treatment, wastewater treatment and water reclamation, process equipment supplied and manufactured by WesTech is designed to work and built to last. Design-build, plant expansions, and upgrades are each approached from a holistic view of the flow sheet and a broad base of experience in yours and other industries with similar challenges, always with an eye for efficiencies that go to the bottom line.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    Customized Solutions for surface water treatment industry

    WesTech offers a holistic approach to surface water treatment for potable use. Depending upon the raw water quality, the flow rate, and operational preferences, WesTech can provide conventional flow, combination treatment units, packaged systems, high-rate processes, or even customized solutions.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    Industrial wastewater treatment plant design

    Environmental engineering’s agency Colsen b.v. designs, specifies and executes building site direction of several kinds of wastewater treatment installations for industrial- and communal wastewater. These installations are designed to deal with the local climatological conditions and specific customer demands.

    By Colsen International b.v. based in HULST, NETHERLANDS.

  • Premium

    Hydraulic designing for the water treatment industry

    By Innovative Hydraulics based in Pittsburgh, PENNSYLVANIA (USA).

  • Premium

    Chemical Water Treatment for cleaning

    Deposits in water systems, especially in heat exchangers, result in a significant heat transfer reduction, in low efficiency and a loss of cooling capacity. Some systems, after long operational periods without any water conditioning or with inadequate treatment, need cleaning. Therefore Kurita Water Solutions proposes acidic, alkaline and neutral cleaners to remove deposits, scale, fouling, dirt, grime or impurities.

    By Kurita based in Tokyo, JAPAN.

  • Premium

    Aeration and mixing technologies for mining wastewater treatment

    Optimize Mine Production. We understand that you are facing increased regulations and mining operations continuously deal with challenges presented by harsh and dangerous conditions. Wastewater treatment to meet regulatory and social demands only compounds those challenges. Aeration Industries International can limit the time and effort you spend on wastewater treatment, allowing you to focus on what matters most… production.

    By Aeration Industries International (AII) based in Chaska, MINNESOTA (USA).

  • Premium

    Aeration and thorough mixing for lagoon optimization

    Lagoon SolutionsWith thousands of installations worldwide, Aeration Industries provides lagoon solutions that are built on the experience and expertise that comes from more than 40 years of experience in wastewater treatment. Whether it’s industrial wastewater treatment requiring thorough mixing and high oxygen transfer efficiency, or a municipal wastewater treatment system requiring efficient and effective treatment; Aeration Industries will design a solution to optimize your current lagoon.

    By Aeration Industries International (AII) based in Chaska, MINNESOTA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you