Only show results available in Virginia? Ok

Water Discharges equipment for Water and Wastewater

  • Model WQM-Turb - On-Line SS/Turbidity Monitor

    The WQM-Turb combines SS/turbidity & temperature measurement in a low cost monitoring unit. It is intended for continuous operation to monitor the suspended solids of the final effluent discharge and produce the appropriate control signals. Typical applications can be found in final effluent discharges in both water and wastewater works.

    By Shanghai Besters Ltd based in Shanghai, CHINA. from On-Line SS/Turbidity Monitor Product line

  • Zebra - Muscle Oil Coalescer

    Continuously cleans, filters, and aerates to prevent static sump rancidity. Intake attachment options to suit almost any application. Coalescing media increases surface area for faster separation. Improved Internal Oil Discharge Skimmer (IODS) dispenses virtually coolant-free oil. Oxygenator™ aerates the barrel to prevent bacterial ...

    By Zebra Skimmers Corporation based in Solon, OHIO (USA). from Muscle Oil Coalescer Product line

  • Improvement of Biological Treatment

    Over time, the challenges on effluent plants will alter from those used in the design stage. Effluent volumes, pollutant types or loads and discharge standards will change, requiring re-thinking of the approach to be taken. have many alternatives for improvement of an existing plant. Where biological treatment is involved, after the study of ...

    By Castor HR Consulting Ltd based in Kenilworth, UNITED KINGDOM.

  • Redivac Iseki - Vacuum Station

    The vacuum station houses the vacuum pumps, collection vessel, sewage discharge pumps and the system control panel. The sewage travels through the vacuum sewer until it reaches the vacuum station where it is held in the collection vessel which acts as a temporary reservoir. The sewage level rises within this vessel to a pre determined level at ...

    By Redivac based in Daventry, UNITED KINGDOM. from Vacuum Station Product line

  • Adicomp - Model VE - Belt Drive Compressor

    The VE compressor series with belt drive meets all the requests for compressed air with great flexibility at the different pressures of use and with a degree of purity that varies according to the customer's needs.

    By Adicomp s.r.l. based in Isola Vicentina (VI), ITALY. from Belt Drive Compressor Product line

  • Double-Shaft Mixers

    This mixer offers good mixing results together with high production, due to continuous operation without dead times. Mixing takes place by means of adjustable blades placed on counter-rotating shafts. In this way, ad material flows in the trough it is contemporarly mixed and transferred from one shaft to the other until the dischargingdoor is ...

    By Fansider S.R.L. based in Spezzano di Fiorano, ITALY. from Double-Shaft Mixers Product line

  • Model ECLH - Extended Coverage Pendent Sprinkler

    The Globe Quick Response Extended Coverage Pendent Sprinkler for Light Hazard occupancies is a low profile yet durable design, which utilizes a 3mm frangible glass ampule as the thermosensitive element. This provides sprinkler operation approximately six times faster than ordinary sprinklers. While this Quick Response Sprinkler provides an ...

    By Globe Fire Sprinkler Corporation based in Standish, MICHIGAN (USA).

  • Fersil Curves - Model 67º (TU) - PVC-U of Compact Wall

    The accessories FERSIL brand in PVC-U of compact wall, they are in gray color, with methods of union by smooth mouth to paste. They are manufactured according to EN 1329-1, have excellent mechanical strength, have good resistance to discharge of hot water and the best possible classification for plastic materials, B-s1, d0 according to EN ...

    By Fersil-Freitas & Silva, S.A based in Cesar - Oliveira de Azeméis, PORTUGAL. from PVC-U of Compact Wall Product line

  • Quick Response: Pendent

    The Globe's GL Series Dry Type Pendent Sprinkler is designed for use in special applications such as freezing environments and conditions where sediment or foreign materials might accumulate in ordinary drop nipples. The Globe GL Series Dry Type Pendent Sprinkler utilizes a frangible glass ampule sprinkler. At the ampule's rated temperature, the ...

    By Globe Fire Sprinkler Corporation based in Standish, MICHIGAN (USA). from Quick Response: Pendent Product line

  • Krumme - Gutter Covers

    Made by Krumme – maximum efficiency, accident prevention and cost reduction. The formation of algae in the gutter is a common problem. The unobstructed clear water discharge can only be ensured by regular machine cleaning or even complex manual cleaning.

    By Krumme, Friedrich, GmbH based in Bad Hersfeld, GERMANY.

  • ORTNER - Automatic Oil Discharge

    In various applications you will find large amounts of oil. In this case you can reduce the cost of maintenance and waste disposal by installing an ORTNER automatic or manual discharge valve. This valve will take off the oil accumulated inside your tank and conduct it to a separate vessel that can be located inside or outside your separator. The ...

    By ORTNER WASSERTECHNIK GmbH based in Lienz, GERMANY. from Automatic Oil Discharge Product line


    APPLICATION DATAMinimum bore size ... 100 mm.Internal dia. of Cylinder ... 63.5 mmStroke length ... 125±4 mm.Average discharge per stroke ... 16 liters per minute of 40 strokes.Operating depth (approx.) ... up to 45 metersSALIENT FEATURES: • The above-ground mechanism is fabricated from welded steel plates and sections for strength, and ...

    By FAIRBIZPS based in INDIA.

  • In-Viro-KLEAN - Portable Treatment System

    In-Viro-KLEAN is a portable treatment system designed to polish water by removing particulate matter and extracting hydrocarbons from applications where such discharge is not desired. In-Viro-KLEAN treatment system is a compact, economical water treatment system that could ensure the prevention of oil discharge from different facilities ...

    By Nican Holdings Ltd. based in Calgary, ALBERTA (CANADA).

  • Dynablast - Model HV690FLS-12V - Hydrovac Hot Water Heater / Hydrovac Boiler

    Fuel Oil Heated up to 3500PSI and Features:. Heat Rise 7 gpm@165F. No Steam. Momentary Test, Flow & Thermostat. Coil Water Discharge Bottom. Fuel Pressure Gauge # 1 or # 2. HV12DPLS Control Box Included. Assembled in Canada. ETL Certified.

    By Dynablast a division of John Brooks Company Limited based in Mississauga, ONTARIO (CANADA).

  • Marsoflex - Air and Water Hoses

    marsoflex air / water hoses are discharge hoses used for a variety of different applications in all industries as well as mechanical engineering and plant construction, e.g. as nitrogen hoses, multi-purpose hoses, hot and cold water hoses and compressed air hoses. marsoflex air / water hoses are produced according to customers’ ...

    By OTTO MARKERT & SOHN GMBH based in Neumünster, GERMANY. from Air and Water Hoses Product line

  • Mycelx

    Procon Environmental Technologies are able to provide a Mycelx filtration system that guarantees 99,9% removal of hydro carbons to meet sewage and storm water discharge limits. “MyCelx is a patented oil removal technology. Fifteen patents, Fortune 100 clients, and hundreds of installations worldwide attest to the fact that MyCelx is the ...

    By Procon Environmental Technologies (Pty) Ltd. based in Witbank, SOUTH AFRICA.

  • CMO - Model HD Series - Fixed Cone Valve

    Manufacturing range: from DN50 up to DN2500 (bigger sizes under request). Standard construction with body and sleeve in carbon steel with stainless steel sliding side. Sealing between stainless steel and EPDM joint. Standard actuator: Two hydraulic cylinders (one on each side). Other options available like electric actuator. The valve is controled ...

    By Construcciones Metálicas de Obturación (CMO) based in Tolosa, SPAIN. from Fixed Cone Valve Product line

  • Model 110 GR - Heavy Duty Water Suction and Discharge Hose

    Temperature Ranges: -13°F to 140°F. Applications: Heavy duty water suction and discharge hose for use in industrial, construction, and agricultural applications. Construction: Flexible PVC, rigid PVC helix, smooth bore, smooth O.D.

    By Kanaflex Corporation based in Vernon Hills, ILLINOIS (USA). from Heavy Duty Water Suction and Discharge Hose Product line

  • OS&D Hose

    4”, 6”, 8”, and 12” 250 PSI Oil Suction and Discharge with built-in Flanges each end. For the toughest jobs, OS&D is the answer. Available in 10’ and 20’ standard lengths.

    By JGB Enterprises, Inc. based in Liverpool, NEW YORK (USA).

  • Aquamake

    AQUAMAKE is revolutionary system for creating flush toilets using recycled wastewater.No wastewater discharges mean the system is exempt from Private Sewerage System Law Restrictions.Does not need water supply or source.Units can be installed regardless of locational conditions.No water or periodic inspection costs are incurred.Practically ...

    By TS-SADE Co. Ltd. based in Sumida-ku,, JAPAN.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you