Water Flow Applications

18 Results found
Only show results available in Virginia?
OK
  • Category: Water & Wastewater ×

  • Subcategory: Water Flow ×

Water Data Management Solution for Hydrometric Network Monitoring

by KISTERS group     based in Aachen, GERMANY

Centralize your hydrometric network monitoring efforts with KISTERS solutions. They provide a complete range of tools to monitor surface water, groundwater, meteorological, and water quality data.

Inspection of flow measuring equipment for hydraulic inspection

by NIVUS GmbH     based in Eppingen, GERMANY

Definition of Task: Metrologic inspection of flow measuring equipment according to German self-control ordination (EKVO). Inspection of flow measurement at relevant discharge point according to German regulations.

Solutions for irrigation flow monitoring in submerged culverts

by Greyline Instruments Inc.     based in Long Sault, ONTARIO (CANADA)

Greyline DFM 5.0 Doppler Flow Meters with waterproof ultrasonic sensors measure flow in submerged concrete culverts in the Raymond Irrigation District in Alberta, Canada.

Open Channel flow monitoring for wastewater treatment plant

by Greyline Instruments Inc.     based in Long Sault, ONTARIO (CANADA)

After 16 years of service, the Long Sault WWTP replaced two older Greyline Open Channel Flow Monitors with new data logging OCF 5.0 models. This SBR treatment plant`s influent is measured with flow through two 6` Parshall Flumes.

Area-velocity flowmeter for sewage lagoon discharge flow monitoring

by Greyline Instruments Inc.     based in Long Sault, ONTARIO (CANADA)

The Township of South Glengarry installs a new Greyline AVFM 5.0 Area-Velocity Flow Meter to measure continuous discharge from their municipal sewage lagoon. The sealed ultrasonic sensor is mounted in a horizontal 12` PVC pipe. The AVFM replaced a magnetic flowmeter that was unable to measure seasonal low flow rates.

Flow monitoring for quarry dewatering compliance

by Greyline Instruments Inc.     based in Long Sault, ONTARIO (CANADA)

A Greyline AVFM Area-Velocity Flow Meter monitors and data logs water discharged from the Bray Quarry to the South Raisin River. The Quarry is required to measure flow for environmental permit compliance.

Area-velocity flowmeter for measuring sewage and stormwater flow

by Greyline Instruments Inc.     based in Long Sault, ONTARIO (CANADA)

Greyline AVFM Area-Velocity Flow Meters are installed thoughout the country by Teletronic Denmark to monitor municipal sewage and stormwater. Application photos and descriptions illustrate flow monitoring in manholes and open channels.

Water accountability portable monitoring for solving flow rate mystery

by Greyline Instruments Inc.     based in Long Sault, ONTARIO (CANADA)

The Glen Walter Sewage Collection System was built to service 1080 customers in 1989. At the time the population was 850 but by 1995 the sewage treatment plant had already reached capacity. Shawn Killoran took over the Operations Manger position in 1999 and, along with the Mayor and Council, he immediately had concerns about the excess flow.

Level indicating transmitter for swimming pool level control

by Greyline Instruments Inc.     based in Long Sault, ONTARIO (CANADA)

A Surge Tank is used at the Okatokes Rec Centre Swimming Pool to regulate pool level. By monitoring level in a surge tank the non-contacting Greyline LIT25 Level Indicating Transmitter controls makeup water flow through a solenoid valve.

Water Treatment Solutions for Radium Removal

by Adedge Water Technologies, LLC     based in Buford, GEORGIA (US) (USA)

Radium is found naturally in uranium ores. It is an alkaline earth metal that decomposes in water and  it is over a million times more radioactive than the same mass of uranium. As a radiological hazard that emits alpha, beta, and gamma rays, it is a carcinogen.

Sewage Treatment Plants and Flow Sensors for Industry Application

by HydroVision GmbH     based in Kaufbeuren, GERMANY

In sewage treatment plants, flow sensors are primarily installed for internal reasons. Ultrasonic flow meters are used to control the flow velocity in partially filled and fulfilled pressurized pipes, specific plant components, for leak detection or to control the use of additives. International regulations such as the EU-Directive for handling municipal waste water require flow metering for a continuous surveillance of waste water flow. Defective flow monitoring in sewage-treatment plants can therefore influence their operation, but there can also be legal or environmental consequences.

 

Water Monitoring and Flow Measurement Systems for Water Supply

by HydroVision GmbH     based in Kaufbeuren, GERMANY

Although there is enough water on earth, its uneven distribution, the rising population and our carelessness drinking water starts to get short. In the future more and more pipelines for drinking water will be built all over the globe. In order to operate huge and complex pipe networks efficiently, water flow measurement and flow monitoring will become necessary. The increasing efficiency of ultrasonic flow meters will make such calculations more and more effective.

Flow meters for the environmental flow solutions

by Sierra Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

Our flow measurement technology is ideal for applications ranging from landfill emissions to wastewater treatment and numerous applications in between. We have developed many flow meters and controllers to measure the emissions from landfills and other green house gas producers, in addition to being a long standing leader in the testing of emissions for large engines. Water treatment is also an important driver for the company as we continue to develop innovative solutions for waste water treatment.

Flow & Energy Management Solutions for water & waste water

by Spire Metering Technology     based in Marlborough, MASSACHUSETTS (USA)

RH20 and EF10 (semi-portable). Well-suited for checking installed meters, leakage determination, network analysis and flow survey.

Water measurement systems & sensors for flow measurement

by Isodaq Technology - Hydro-Logic Group     based in Bromyard, UNITED KINGDOM

The recommended type of measurement system will depend on several site-specific factors such as :-

Water Monitoring and Flow Measurement Systems for Water Power

by HydroVision GmbH     based in Kaufbeuren, GERMANY

Hydro power contributes to supplying approximately 3,5 per cent of electric energy generated worldwide. Its share in power generation from renewable resources lies at 18 per cent and will continue to grow as resources of fossil fuels are depleted. Hydro electric performance depends essentially on the usable altitude difference between upper and lower reservoir, and hence the resulting water flow. In order to use the “fuel” water in an optimal way, the flow velocity has to be monitored without any interruptions. Ultrasonic flow meters, flow sensors and clamp-on flow meters (OR clamp-on technology) are ideal for accurate flow metering and flow monitoring.

Power-independent flow measurement with GPRS

by NIVUS GmbH     based in Eppingen, GERMANY

In a pit water purification system it was necessary to detect the discharge volumes. The operator wanted a regular and automatic transmission of readings. On the selected measurement place no mains power connection was available. Due to the risk of vandalism, it was not planned to install a switching cabinet. See the NIVUS solution for this measurement task here.

EDI Solutions

by QUA Group LLC     based in Canonsburg, PENNSYLVANIA (USA)

QUA’s FEDI® (Fractional EDI) stacks have superior hardness tolerance compared to the other EDI products on the market. With a dual voltage process this allows for a higher flexibility and tolerance to inlet water conditions, thus lowering the risk of scaling, and improving the plant's design economics and reliability. FEDI stacks are available in three different models which can be applied either for higher hardness tolerance or high water flow rates. MEGA FEDI stacks are ideal for large capacity, high flow systems normally required in heavy industrial projects such as power, petrochemicals, & electronics for high purity water needs. Each stack can handle treated water flow of up to 75 GPM . MEGA FEDI’s unique stackable design minimizes piping, reduces footprint, and makes it simple and easy to install on skids. FEDI-Rx products are specially designed for applications in pharmaceutical, biomedical and laboratory applications where installations require hot water sanitization to meet

Need help finding the right suppliers?

Let the XPRTs do the work for you