From cutting-edge MABR wastewater treatment to containerized desalination, Fluence delivers cost-effective and sustainable solutions for commercial customers worldwide. Fluence has more than 30 years of experience in the design, construction, and operation of water and wastewater treatment plants for commercial clients, including resorts, golf courses, commercial buildings, and campuses.
Fluence has decades of experience providing sustainable treatment solutions for power industry process water and effluent. Industrialization and population growth are spurring the demand for power around the world, putting pressure on fuel and water resources. At the same time, power producers face strict pollution and air-quality controls.
The natural gas industry has seen a significant increase in activity with the discovery of new shales located throughout the world. The development of advance drilling technologies allow for extraction of gases deeper in the earth, revolutionizing the industry while creating a new demand for air and water pollution control technologies.
Common drilling procedures for oil and gas, used widely around the world, produce a consistently increasing amount drill cuttings containing oil. In some cases, drill cuttings even contain other hazardous components such as mercury or NORM (Natural occurring Radioactive Material), requiring special attention. Treatment of drill cuttings is therefore beneficial from both an environmental and an economic standpoint, allowing valuable drilling oil to be recovered, and ensuring environmentally sound disposal of the...
Fluence has decades of experience delivering sustainable water and wastewater solutions to communities large and small. Fluence has more than 30 years of experience in the design, construction, and operation of water and wastewater treatment plants for municipal clients, government entities, communities, emergency relief, and private use.
Sustainable Technologies for Treating Produced Water for Reuse or Deep Well Injection. Oil and gas exploration and production are highly complex and capital-intensive processes. Producers face many challenges, including the constraints of climate, environment, and geography. As companies extract oil and gas in areas that at one time were considered unpromising, water plays an ever more essential role.
Water is used for a wide variety of purposes in industrial production. Water has to be treated, so that sufficient amounts are available in the quality required for production. Process water must generally be re-treated after it has been used, so that it can either be discharged according to regulations or returned to the water cycle.
Water is a precious and crucial resource in the process of food and beverage production. From screening to tertiary treatment, biological nutrient removal to water reclamation, WesTech equipment is designed to maximize efficiencies and minimize downtime, all while meeting the ever-tightening EPA regulations.
Oil sands or, more technically, bituminous sands, are a type of unconventional petroleum deposit. Oil sands represent a vast wealth of energy reserves for the world rivaling traditional sources in quality, availability and the ability to meet the world`s needs for many years into the future. The technologies for extraction of this resource are increasingly efficient, and WesTech has worked with several companies on the leading edge of these efforts and is a ready partner for new projects and plant upgrades.
Kurita develops products and solutions for the waste water treatment to improve the water quality and respect the legislation and the environment. Due to increased environmental sensitivity and today’s legislative restrictions, most industrial plants which use water already have wastewater treatment plants. The different Kurita Technologies carefully adapts to the needs of each plant through the optimization and improving the water quality and reducing your operating costs. Improve the water reuse in your...
UV, Ozone and Advanced Oxidation Technologies are innovative approaches to safely disinfecting and destroying organic pollutants in water, industrial waste waters, ground waters and gas effluents. These processes do not simply transfer pollutants to other mediums. Unlike other disinfection and oxidation techniques, UV, Ozone and advanced oxidation processes do not create toxic by-products. The ultimate end products of the advanced oxidation processes are carbon dioxide and water.
The many production facilities within the steel industry, e.g. the blast furnace, converter, continuous caster, hot and cold strip mills and the coke oven plant require immense quantities of water for the cooling circuits and for gas scrubbing. During the last few years, the majority of steel plants have managed to significantly reduce freshwater usage per ton of steel through water recycling and process optimization. However, the high water quality standards required for the water circuits and regulations for...
Water is one of the most important raw materials for industrial production. For this reason, processes are now used in water treatment that not only produce the required water quality, but also allow for recycling. The treated water can either be fed back into the process, or reused for other purposes. Water recycling plants lead to a significant reduction in operational costs for production.
Sedimentation, flotation, mixing, pulp separation and chemical recovery systems are among the myriad of process equipment WesTech supplies to the pulp and paper industry. Customized to the unique needs of operating plants, WesTech liquid/solids and liquid/liquid separation expertise is built upon years of working with plant operators and owners. The result is a working relationship and reliable process.
Oil and grease in formation water includes free oil, dispersed oil (small oil droplets), and emulsified oil. Oil and grease discharge, along with produced water, involves compliance with stringent regulations. Oil and grease removal methods depend on the end usage of treated water and composition of oil in the produced water. For more info contact us at email@example.com
Food Processing: Water is a precious and crucial resource in the process of food and beverage production. From screening to tertiary treatment, biological nutrient removal to water reclamation, WesTech equipment is designed to maximize efficiencies and minimize downtime, all while meeting the ever-tightening EPA regulations.
When automobiles are manufactured, each vehicle is painted by spraying a mist (paint mist) onto the car body and other parts. This process is referred to as the paint booth, and it ensures the beautiful finishing of car bodies and components and rust proofing. The excess paint that does not to cling to the car body and parts in the paint booth falls to the floor and is collected by water. This water is used as recycling water after removing the paint with water treatment chemicals.