Water Reservoirs Applications

11 Results found
Only show results available in Virginia?
OK
  • Category: Water & Wastewater ×

  • Subcategory: Water Reservoirs ×

Core Analysis for unconventional reservoirs

by Oxford Instruments plc     based in Abingdon, UNITED KINGDOM

Low field Nuclear Magnetic Resonance (NMR) is routinely used in core analysis laboratories to examine the T2 relaxation time distribution of fluids in core plugs. These distributions can be interpreted to give information on: pore size distributions; permeability; total and effective porosity; free fluid index and bound water volumes. The partnership between Oxford Instruments and Green Imaging Technologies allows us to integrate hardware and software to enable any core analysis laboratory to generate these petrophysical results without the need for in-depth knowledge of NMR.

Water Data Management Solution for Lake / Reservoir Management

by KISTERS group     based in Aachen, GERMANY

Whether it’s for hydro electric production, irrigation operations, or long term ecosystem monitoring, utilize KISTERS solutions to monitor lakes and reservoirs.

Floating Cover – Industry

by Hexa-Cover A/S     based in Thisted, DENMARK

The Hexa-Cover Floating Cover is the optimum solution as a cover for almost any form of surface liquid, i.e.: Chemicals Chemical, Oil Oil, Leachate Leachate, Decoction Decoction, Food and Beverage Food and Beverage, Pulp and paper Pulp and paper, Hexa-Cover(R) Floating Tile Cover Fish farms, Slaughter houses Slaughter houses, Dairies Dairies, Cement plants Cement plants, Mines Mines, Dredging and excavation works Dredging and excavation works, , for controlling odor, heat loss, emission etc.

Floating Cover – Biogas/Agriculture

by Hexa-Cover A/S     based in Thisted, DENMARK

The Hexa-Cover Floating Cover is the optimum solution as a covering for almost any form of surface liquid, in i.e.: Biogas plants Biogas plants, Slurry tanks Slurry tanks for primarily pigs (but also cattle and poultry) for eliminating odor and emission etc.

WEDA Underwater cleaning robots in lagoons and large fountains

by Weda AB     based in Södertälje, SWEDEN

The new Weda YT-5000 with a five (5) meter wide suction nozzler speeds up the cleaning process considerably. Estimated cleaning speed is up to 3000 sq. meters/hour. The cleaner removes efficiently bottom sedimentation (sand, algae etc.) from the bottom surface and pumps it to a selected discharge point (filter, waste etc).

Floating Cover – Water

by Hexa-Cover A/S     based in Thisted, DENMARK

Hexa-Cover Floating Cover provide an ideal cover for all forms of water i.e.: Reservoirs for Fire Protection Reservoirs for Fire Protection, Spill over tanks Spill over tanks, Wastewater Wastewater tanks, reservoirs, Cooling water Cooling water, Process water Process water, Reserve water reservoirs Reserve water reservoirs, Compensation tanks Compensation tanks, Irrigation Reservoirs for Irrigation, Collected surface water Reservoirs for reuse of collected surface water, Water settlement lagoons Water settlement lagoons, Storm water ponds Storm water ponds, Bird deterrent Bird deterrent, Drinking troughs Drinking troughs.

Fly Ash - Industrial Vacuum

by Vac-Con, Inc.     based in Green Cove Springs, FLORIDA (USA)

Fly Ash can cause many problems. The Vac-Con & Vector Pneumatic Vacuum systems can assist and solve many of these problems. Our high-performance vacuum systems are manufactured in three basic configurations: Truck mounted, Trailer mounted, and Fixed/static installed. Any of these systems can be integrated into the existing power plant design. All of our vacuum systems can be utilized to solve your plant’s fly ash removal/clean-up needs and can assist in many other maintenance projects. All can be tailored to fit into your power plant’s specific needs. Vac-Con Truck mounted Industrial vacuum systems are equipped with large storage debris tanks with self-cleaning intake filter systems. The Industrial Trucks vacuum the waste products through existing manifold piping or with hoses attached directly to the debris tank. When fully loaded, the truck can then drive directly to the disposal site and discharge the waste products. The Industrial Truck offers a great amount of flexibility of operation and can be utilized anywhere in your facility for many different types of normal and emergency maintenance operations. The Vac-Con Industrial Vacuum Truck can be utilized on both wet and dry materials. The same Vac-Con truck can be used for removing Fly Ash from your plant, coal from broken intake belt conveyors, or used to suck wet muddy material from storage lagoons. The Vector Trailer mounted Vacuum Systems are designed to be used in several locations around power plants. The Trailer mounted Vacuum Systems connect to Manifold piping located in key areas within your power plant. The Vacuum systems move the waste products from the plant and deposit these products into moveable storage containers. The loaded storage containers when full can then be moved to the disposal sites for discharge. Vector Static Mounted Vacuum systems are designed to vacuum and remove Fly Ash and other bulk waste products through manifold piping from operational areas of the plant and deposit these waste products into collection storage silos for later transport to disposal sites. The fixed vacuum systems are electric motor driven and are normally installed as a permanent addition to in-plant existing conveying systems. Please contact us with any requirements you may have. We will evaluate your request and respond with solutions specific to solve your problems and fit your needs.

Algae control in raw water reservoirs

by LG Sonic     based in Zoetermeer, NETHERLANDS

Increase the water quality, lower chemical consumption, and prevent taste and odor problems without harming the ecosystem.

US Peroxide Rapid Response

by USP Technologies     based in Atlanta, GEORGIA (US) (USA)

US Peroxide (USP) is uniquely positioned to rapidly respond to your environmental treatment challenges. USP combines experienced applications and equipment field support with a large inventory of storage systems and pumping modules to respond quickly to time sensitive water and wastewater treatment situations. Advantages With considerable inventory of tank and pump systems as well as our partnerships with leading chemical suppliers, USP can mobilize chemicals and equipment quickly to respond to your rapid response needs, often within 24 hours. We offer dosing options are designed to meet all safety requirements and sized to meet your specific process and dosage rates requirements. Our Applications Engineers and Equipment and Engineering Services teams will provide timely and thorough applications assistance and technical support during the entire project. Download the Rapid Response Solutions Brochure (PDF) Sample Applications Examples of where our Rapid Response Program has successfully addressed treatment challenges include the following: Temporary application of hydrogen peroxide as a source of supplemental dissolved oxygen in biological treatment systems during periods of excessive BOD loading Hydrogen peroxide pretreatment of high strength wastewater to reduce toxicity or BOD/COD prior to biological treatment Emergency hydrogen peroxide treatment of lagoons or ponds to control hydrogen sulfide and other odors Shock cleaning of cooling water systems for biofouling and slime control

Ground Penetrating Radars (GPR) for Fresh Water Reservoirs Eploring

by Transient Technologies LLC     based in Kyiv, UKRAINE

In hydrobiology GPR also find its applications: fresh water reservoir bottom structure. find items lying on the reservoir’s bottom and inside bottom sediment. measure of peat and other bottom sediments thickness . search for underwater piping and other infrastructure items. archaeological underwater explorations.

Algae monitoring of drinking water reservoir -

by microLAN On-line Biomonitoring Systems     based in Waalwijk, NETHERLANDS

Due to green algae problems in the water reservoir of a drinking water treatment plant, the ALGcontrol was installed to continuously monitor the algae concentrations and possible toxic blue green algae blooms. During almost 4 months the ALGcontrol measured the total chlorophyll and cyano chlorophyll concentrations of the water reservoir. In order to be able to compare these results, second off-line controls were carried out using the ISO 10260 chlorophyll-a quantification (extraction into ethanol, spectrophotometric detection at 665 and 750 nm). The results of the off-line standard lab method show a good correlation with the measurements of the ALGcontrol. The good correlation can be verified as well at high as at low concentrations of total chlorophyll.

Need help finding the right suppliers?

Let the XPRTs do the work for you